You will serve as an ENGINEERING TECHNICIAN in the Test Engineering and Planning Division Code 246, Shipyard Commander Department of PSNS and IMF.

Duties

You will be the assistant to the Chief Test Engineer (CTE) Non-Nuclear for administrative and technical control of the non-nuclear test and work control programs. You will provide direct technical oversight of non-nuclear testing, control of system conditions, and the transfer of ships systems operation and work controls during the overhaul. You will provide day-to-day management, control, and direction of the non-nuclear work control and test program. You will obtain and maintain the status of all in process and upcoming production work and testing. You will approve, monitor, and provide technical oversight during test evolutions and ensure procedural compliance is followed. You will direct execution of authorized procedures as necessary to establish system conditions required for work, maintenance and testing.

Requirements

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade level. This requirement is called time-in-grade. Time-in-grade requirements must be met by the closing date of this announcement.
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• This is a bargaining unit position.
• You will be required to successfully complete a pre-appointment physical examination.
• You will be required to obtain and maintain an interim and/or final secret security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
• Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
• You will be required to perform occasional sea duty.

Qualifications

Your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-11 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: providing technical engineering oversite of testing, control of system conditions, and the transfer of ships systems operation and work controls for ship or submarine system repair, overhaul, or maintenance projects. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series Engineering Technical Series 0802 (opm.gov) Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants must meet the following Basic Requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Applicants must possess Specialized Experience (for positions at GS-4 or equivalent and above):

Examples of qualifying specialized experience include technical work in: drafting, surveying construction estimating, physical science, mathematics, aerospace, architecture, chemicals, electrical or mechanical systems, mining, petroleum, or nuclear systems.

Experience in a trade or craft may be credited as specialized experience when the work provided intensive knowledge of engineering principles, techniques, methods, and precedents. Examples are trade positions with substantial developmental, test, or design responsibilities such as:

• Planner and estimator who analyzed designs for production purposes.
• Instrument maker or model maker who performed design or development work on devices fabricated.

or

Education and Training:

For positions at GS-3 (or equivalent):

Successful completion of l year of post secondary study that included at least 6 semester hours in any combination of courses such as engineering, engineering or industrial technology, construction, physics, drafting, surveying, physical science, or mathematics.

For positions at GS-4 (or equivalent):

Successful completion of 2 years of post secondary study that included at least 12 semester hours in any combination of courses such as those shown above for GS-3 (or equivalent). At least 3 of the 12 semester hours must have been in drafting if the position has been designated by a drafting area of specialization.

For positions at GS-5 (or equivalent):

Successful completion of a full 4-year course of study leading to a bachelor's degree (a) with major study in an appropriate field of engineering, construction, or industrial technology; or (b) that included at least 24 semester hours in any combination of courses such as those shown above for GS-3 (or equivalent). At least 6 of the 24 semester hours must have been in drafting if the position has been designated by a drafting area of specialization.

Certification:

Engineering technicians may be certified by the National Institute for Certification in Engineering Technologies, an organization sponsored by the National Society of Professional Engineers. Certification by the Institute will be helpful as a measure of the technician's quality of experience.

Contacts

• Address PSNS and IMF 1400 Farragut Ave Bremerton, WA 98314 US
• Name: Department of Navy EIC
• Email: [email protected]