You will serve as a SHIPFITTER (MATERIAL HANDLER) in the Repair Department, Hull Division of TRIREFFAC KINGS BAY.

Duties

You will serve as a Shipfitter Material Handler responsible for laying out, fabricating, assembling, and installing various metal structural parts of submarines. You will perform a variety of related duties to support the refit operations conducted at TRIREFFAC-KB. You will receive materials from the supply department and perform inspection/verification of incoming material IAW local TRIREFFAC-KB guidance such as IPI-0610-130-00lA and system drawings. You will ensure supply system material is identified with the NSN/NIIN (or pseudo-NSN) applied directly to the material or its individual packaging. You will segregate the material while is it undergoing receipt inspection using signs and/or barriers. You will review documentation received with the material to identify the Job Control Number, which is typically noted on the Material Movement Document. You will receive unused, less than issue unit quantities of Hazardous Material from center personnel. You will identify and quantify usage and properly store material for later issue or properly transfer material to Satellite Accumulation Area. You will be responsible for determining the receipt inspection requirements by the Automated Work Request (AWR) and the Job Material List (JML). You will be determining if the material is designated for Quality Assurance inspection or for shop inspection and ensuring inspections are completed in accordance with applicable guidelines.

Requirements

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• Incumbent must be able to acquire and maintain Controlled Material Handler (CMH) qualifications.
• Must be able to maintain an IT-II level designation.
• You will be required to obtain and maintain a current valid United States driver’s license.
• You will be required to successfully complete a pre-appointment physical examination.

Qualifications

Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO DO THE WORK WITHOUT MORE THAN NORMAL SUPERVISION in: interpreting blueprints, laying out, fabricating, assembling, and installing various metal structural parts of submarines and receiving materials for inspections to support refit operations. assisting with working from blueprints, instructions, specifications, using hand and power tools for metal work, assembly, disassembly, re-assembly of metal structures. assisting with various types of metal work using proper tools and techniques to accomplish ship-fitting assignments and maintaining records for inspection of materials received. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: https://www.opm.gov/policy-data-oversight/classification-qualifications/federal-wage-system-qualifications/#url=List-of-Approved-Job-Elements Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Contacts

• Address TRIREFFAC KINGS BAY 990 USS Thomas Jefferson Dr Kings Bay, GA 31547 US
• Name: Department of Navy EIC
• Email: [email protected]