This is a public notice flyer to notify interested applicants of anticipated vacancies. Applications will not be accepted through this flyer. Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered. There may or may not be actual vacancies filled from this flyer. Notice of Result letters will not be sent to applicants who respond to this flyer.

Duties

You will serve as the Navy Technical Representative (NTR) for preparation of the Explosive Safety Submission (ESS) for review and approval, and other projects involving Range Sustainment or "munitions and explosives of concern" issues. You will coordinate with project teams, regulatory agencies, stakeholders, and Naval Ordnance Safety and Security Activity (NOSSA) on explosive safety support. You will deliver explosive safety support to Capital Improvements (CI), Asset Management (AM), Guam Project Management Office and other support lines. You will coordinate with the command and regional representatives in planning to sustain and optimize range complex capabilities. You will provide technical assistance to the Facilities Engineering Commands (FECs). You will monitor technical interfaces with the contractor.

Requirements

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
• You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.
• You will be required to obtain and maintain a current valid United States driver’s license.
• You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment.
• This is a bargaining unit position.

Qualifications

In addition to the Basic Requirements for the series in which you are applying, your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-11 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: 1) Recommending improvements and solving problems for Range Sustainment projects involving Munitions of Explosives of Concern (MEC) and High Impact and Small Arms Ranges, especially in the Range Sustainment Program needs for Navy and Marine Corps; 2) Developing most reasonable approaches to address project management of range clearance, disposal of items containing MEC/Small Arms for Range Sustainment Efforts and advisement to Construction concerns where MEC is of concern; 3) Ensuring adherence to all Federal, State and local environmental laws, regulations and requirements are followed pertaining to collection, transportation, treatment, disposal, reports, manifests, and permits of unexploded ordnance/munitions and explosives of concern; 4) Preparing statements of work (SOW) and independent government estimates (IGE) for environmental work; and 5) Monitoring contracting process on a task order level. NOTE: This experience must be fully supported in your resume. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=GS-PROF AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0400/general-natural-resources-management-and-biological-sciences-series-0401/ https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/1300/general-physical-science-series-1301/ https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/1300/geology-series-1350/ Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. For 1350 Geology series, applicants must meet the following basic requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: You have successfully completed a degree in geology, plus 20 additional semester hours in any combination of mathematics, physics, chemistry, biological science, structural, chemical, civil, mining or petroleum engineering, computer science, planetary geology, comparative planetology, geophysics, meteorology, hydrology, oceanography, physical geography, marine geology, and cartography. OR You have successfully completed a combination of education and experience -- course work as shown in A above, plus appropriate experience or additional education. (Note: Acceptable experience may have been gained through geological field or laboratory work that provided a means of obtaining professional knowledge of the theory and application of the principles of geology and closely related sciences, e.g., geophysics, geochemistry, or hydrology. Such work generally must have involved making close observations, taking samples, handling various types of instruments and equipment, assembling geologic data from source materials, and analyzing and reporting findings orally and in writing. Experience that involved only one phase of geology work, e.g., collecting samples, would not be acceptable as providing the required professional knowledge of the theory and principles of geology. In some situations, professional scientific experience in other fields may be accepted in part as professional geological experience. Such experience must have been preceded by appropriate education in geology or by professional geological experience, and must have contributed directly and significantly to the applicant's professional geological competence. Examples include some positions in geophysics, mining engineering, soils science, physical oceanography, hydrology, climatology, biology, analytic or experimental chemistry, metallurgy, and comparable fields where the normal duties or results of investigations have been extended to the solution of geologic problems by the applicant. Ordinary functions of positions such as seismic, computer, petroleum or mining engineer, mine superintendent, or metallurgist generally are not considered professional geological experience. To receive credit for geological experience obtained in positions that are not full-time professional geological positions, the applicant is responsible for indicating clearly the actual time or percentage of time devoted to geologic duties within such positions, and for giving adequate descriptions of the geologic functions.)

Education

Applicants must meet the following basic requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

For 0819 Environmental Engineering series:
Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
OR
Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org
OR
Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.
OR
Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)e
OR
Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

For 0401 Natural Resources series:
You have a degree in biological sciences, agriculture, natural resource management, chemistry, or a related discipline appropriate to this position.
OR
You have a combination of education and experience in one of the above majors that includes at least 24 semester hours in biological sciences, agriculture, natural resource management, chemistry, or a discipline related to this position plus appropriate experience or additional education. The quality of the combination of education and experience demonstrates that you possess the knowledge, skills, and abilities required to perform the work of the position and is comparable to that normally acquired through the completion of a full four year course of study with a major as described above.

For 1301 Physical Science series:
You have successfully completed a bachelor's degree or higher in physical science, engineering, or mathematics that included 24 semester hours in physical science and/or related engineering science such as mechanics, dynamics, properties of materials, and electronics.
OR
You have a combination of education and experience with education equivalent to one of the majors shown above that included at least 24 semester hours in physical science and/or related engineering science, plus appropriate experience or additional education.

Applicants for the Geology (1350 series): Please refer to the Qualifications section above to see the basic requirements for that series.

Contacts

• Address NAVAL FACILITIES ENG SYSTEMS COMMAND PAC Naval Facilities Engineering Command PAC Pearl Harbor, HI 96860 US
• Name: Kelly Morishige
• Email: [email protected]