This is a public notice flyer to notify interested applicants of anticipated vacancies. Applications will NOT be accepted through this flyer. Interested applicants should review the "How to Apply" section of this flyer for more information on how to be considered. This flyer will be used as positions become available. There may or may not be actual vacancies filled from this flyer. This is an Interdisciplinary position and may be filled with any of the listed occupations.

Duties

Serve as Division Chief, within the Power Division, Research and Technology Integration Directorate reporting to an Assistant Director and applicable Deputy Assistant Director. Lead a diverse multi-technology Power and Energy research, development, and technology integration Division. Create new programs, development and identification of novel technical solutions to address existing and emerging Army power and energy needs, and the identification of important and relevant new discoveries to meet military requirements. Align resources, technical personnel, and technology evaluation support to meet Army goals and deliver transitional technologies and solutions to Army customers. Manage the full range of planning, defining, programming, coordinating, and executing programs within their assigned division and available mission and customer funding. Respond to resource actions, customer queries on progress/status. Lead a diverse staff of government and contractor power and energy engineers, scientists, technicians, and specialists to deliver, evaluate, and integrate new capabilities to partners and customers. Present briefings in multiple forums, both inside and outside the C5ISR Center. Advise senior leadership at the Demo Band 5, Senior Executive Service (SES), and/or Flag Officer levels. Guide and oversee research, development, maturation, and integration of Army Power and Energy efforts. Support complex applied and advanced tactical power and energy Science and Technology to create understanding of technological opportunities in the tactical power and energy space.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• Incumbent is required to submit a Financial Disclosure Statement, OGE-450 upon entering the position and annually, in accordance with DoD Directive 5500-7-R, Joint Ethics Regulation, dated 17-Nov-2011.
• One-year supervisory trial/probationary period may be required unless previously completed.
• This is a Critical Acquisition Position (CAP). This position requires a 3-year tenure agreement. Must sign DD Form 2888 (Critical Acquisition Position Service Agreement) and execute, as a condition of employment, a written tenure agreement.
• This is a testing designated position. Personnel must pass drug screening prior to hiring and will be subject to periodic and random drug testing, thereafter, in accordance with AR 600-85 and Department of Defense Directive 2010.9.
• Business travel is required up to 25% of the time.
• This position is a TOP SECRET WITH SCI position. Incumbent must be able to obtain and maintain a TS/SCI security clearance/access.
• This is an Army Acquisition, Logistics and Technology Workforce position. Selectee must meet position requirements for Engineering and Technical Management certification within 60 months as of entrance on duty.
• Three-year probationary period may be required under the demonstration project for the Engineers and Scientists Occupational Family unless the appointee has previously met the requirements as described in 5 CFR Part 315.

Qualifications

This position is being filled under the Direct Hire Authority (DHA) Bachelors Degree for Scientific and Engineering Positions (STRLs) authorized by 85 FR 78829 dtd 12/07/2020. Who May Apply: US Citizens In order to qualify, you must meet the education and or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Qualified candidates must meet the Basic Requirement for the Interdisciplinary position. In addition to meeting the Basic Requirement, applicants must have one year of specialized experience at the DB-03 (GS-12 grade level or higher equivalency). Specialized Experience: One year of specialized experience equivalent to the next lower grade or band is required. It is defined as one year of specialized experience equivalent to the DB-03 pay band (GS-12 equivalent or higher) in the Federal Service that includes, 1) Planning and leading complex applied research, advanced technology and/or engineering initiatives and programs within the Power and Energy space, 2) Developing technology roadmaps and new project proposals in coordination with other Army and DoD Power and Energy organizations, 3) Initiating, leading, and managing complex research and development efforts with a highly technical team, 4) Creating new customer relationships and sharing technical and programmatic outcomes. Basic Requirement for Engineer (0801Series): A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. Basic Requirement for Physicist 1310 series: A. Degree: Bachelor's degree (or higher degree) in physics, or related degree that included at least 24 semester hours in physics. The courses must have included a fundamental course in general physics and, in addition, courses in any two of the following: electricity and magnetism, heat, light, mechanics, modern physics, and sound. OR B. Combination of Education and Experience: Courses equivalent to a major in physics totaling at least 24 semester hours, plus appropriate experience or additional education. The courses must have included a fundamental course in general physics and, in addition, courses in any two of the following: electricity and magnetism, heat, light, mechanics, modern physics, and sound. Basic Education Requirement for a Chemist 1320 series: A. Degree: Bachelor's degree (or higher degree) in the physical sciences, life sciences, or engineering that included 30 semester hours in chemistry, supplemented by course work in mathematics through differential and integral calculus, and at least 6 semester hours of physics. OR B. Combination of Education and Experience: Course work equivalent to a major in the physical sciences, life sciences, or engineering, including at least 30 semester hours in chemistry, supplemented by mathematics through differential and integral calculus, and at least 6 semester hours of physics, plus appropriate experience or additional education. Basic Requirement for Computer Scientist 1550 series: Degree: Bachelor's degree (or higher degree) in computer science or bachelor's degree (or higher degree) with 30 semester hours in a combination of mathematics, statistics, and computer science. At least 15 of the 30 semester hours must have included any combination of statistics and mathematics that included differential and integral calculus. Transcripts are required to meet the Basic Education for the applicable series. Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.

Education

Basic Education Requirement for Mathematician 1520 series:
A. Degree: Bachelor's degree (or higher degree) in mathematics; or a degree with the equivalent of a major that included at least 24 semester hours in mathematics. The total course work must have included differential and integral calculus and, in addition, four advanced mathematics courses requiring calculus or equivalent mathematics courses as a prerequisite.
OR
B. Combination of Education and Experience: Courses equivalent to a major in mathematics (including at least 24 semester hours in mathematics), as shown in A above, plus appropriate experience or additional education. The total course work must have included differential and integral calculus and, in addition, four advanced mathematics courses requiring calculus or equivalent mathematics courses as a prerequisite.

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications.

Contacts

• Address FN-W4G8AA US ARMY COMBAT CAPABILITIES DEV CMD DO NOT MAIL Aberdeen Proving Ground, MD 21005 US
• Name: Army Applicant Help Desk