This recruitment is for General Engineer positions within the Bureau of Indian Affairs. The duty location is Albuquerque, NM and work schedule will be determined upon selection. This announcement will be used to fill vacancies utilizing the Direct-Hire Authority (5CFR 337.201). Category rating, veteran's preference, and traditional rating and ranking of applicants do NOT apply for this vacancy.

Duties

Serves as either a Contracting Officer's Representative (COR), Awarding Official's Technical Representative (AOTR), and/or the Grant Awarding Official's Technical Representative (GAOTR) for the DFMC managed projects. Prepares complete solicitation packages (e.g., statement of work, statement of objectives, statement of requirements, conceptual drawings) with design guidelines for projects to be designed by A-E services or design-builder contractor. Conducts project management responsibilities such as: developing architectural and engineering (A/E) statements of work; project schedules, cost estimates, and budgets; technical design reviews and analysis of drawings and specifications. Additional duties include responsibilities such as: ensures project compliance with contract provisions and standards; proposes contract changes and modifications; recommends final acceptance of work and prepares closeout documents. Assists in ongoing development of Standard Operation Procedures (SOP). Coordinates for and secures archaeological, historical preservation, environmental, and other clearances prior to construction and monitors project compliance with building and safety codes and standard through document reviews and site visits. Attends meetings with Tribal leaders, school boards, law enforcement officials, private interests, state officials, other federal officials to present projects, describe impacts and to ensure adherence to schedules and designs. Responsible for design and construction services for new facilities and the major alteration, improvement and repair of existing facilities, from inception through the warranty period and final asset capitalization.

Requirements

• U.S. Citizenship Required
• You will be required to have federal payments made by Direct Deposit
• You may be required to successfully complete a probationary/trial period
• A background security investigation will be required for all new hires. Appointment will be subject to the applicant's successful completion of a background security investigation and favorable adjudication.
• If you are a male applicant born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency.
• Indian Preference applies - Preference in filling vacancies is given to qualified Indian candidates in accordance with the Indian Preference Act of 1934 (title 25, USC Section 472).
• Candidate must be able to obtain and maintain a Contracting Officer Representative (COR) Level 1 certificate within 4 months of employment.
• To qualify for this position, applicants must meet both the Basic Requirements defined by OPM and the specialized experience statement defined under qualifications.
• All applicants must submit a full set of transcripts or copy of professional license with their application to verify qualification requirements.
• Additional selections may be made from this announcement if identical vacancies occur in the same location within 90 days from the closing date.
• The full performance level of this position is GS-12. Promotion potential in this announcement does not constitute a commitment or an obligation on the part of management to promote the employee selected at some future date.
• Career ladder promotions are at the discretion of management, and in no way guaranteed.

Qualifications

Basic Requirements defined by OPM Qualifying as a General Engineer: Degree: professional engineering. To be acceptable, the curriculum must: (1) be in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: Professional registration -- Current registration as a professional engineer by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. Written Test -- Evidence of having successfully passed the Engineer-in-Training (EIT) examination, or the written test required for professional registration, which is administered by the Boards of Engineering Examiners in the various States, the District of Columbia, Guam, and Puerto Rico. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum as described above. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, architecture, or mathematics, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. *All applicants must submit a full set of transcripts or copy of professional license with their application to verify qualification requirements. Specialized Experience GS-11: To qualify at the GS-11 grade level, you must have one year of specialized experience at the GS-09 grade level or equivalent performing the following: (1) Serving as either a the Contracting Officer's Representative (COR), Awarding Official's Technical Representative (AOTR), and/or the Grant Awarding Official's Technical Representative (GAOTR) for Federally managed projects, (2) Assisting in managing construction projects from inception to completion, (3) Preparing or reviewing cost estimates for design and construction projects, and (4) Preparing project information materials for briefings. OR 3 full academic years of progressively higher-level graduate education or a Ph.D. or equivalent doctoral degree or a L.L.M. in a related field of study OR A combination of specialized experience and education that totals 100% of the experience requirement. GS-12: To qualify at the GS-12 grade level, you must have one year of specialized experience at the GS-11 grade level or equivalent performing the following: (1) Servicing as either a Contracting Officer's Representative (COR), Awarding Official's Technical Representative (AOTR), and/or the Grant Awarding Official's Technical Representation (GAOTR) for Federally managed projects; (2) Managing construction projects from inception to completion; (3) Preparing cost estimates and/or budgets for design and construction projects; (4) Preparing and presenting project information orally and in writing; (5) Preparing project and program related documents for management review; and (6) Monitoring of and advising on program activities. All qualification requirements must be met by the closing date of this announcement.

Education

If you are qualifying based on your education, you MUST provide transcripts or other documentation to support your educational claims. Unless otherwise stated: (1) official or unofficial transcripts are acceptable, or (2) you may submit a list with all of your courses, grades, semester, year, and credit for the course. All materials must be submitted by the closing date of the announcement.

If more than 10 percent of your undergraduate course work (credit hours) were taken on a pass/fail basis, your claim of superior academic achievement must be based upon class standing or membership in an honor society.

One academic year of graduate education is considered to be the number of credits hours your graduate school has determined to represent one academic year of full-time study. Such study may have been performed on a full-time or part-time basis. If you cannot obtain your graduate school's definition of one year of graduate study, 18 semester hours (or 27 quarter hours) should be considered as satisfying the requirement for one year of full-time graduate study.

If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must send a Certificate of Foreign Equivalency with your transcript in order to receive credit for that education which shows the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: FOREIGN EDUCATION

Contacts

• Address AS-IA Human Resources 12220 Sunrise Valley Dr., Room 4047 Reston, VA 20191 US
• Name: Diane Manzavinos
• Phone: 000-000-0000
• Email: [email protected]