About the Position: Responsible, as Chief, Engineering and Construction Division, and ranking member of the District Engineer's Technical Staff, for program planning and management of all project planning and design activities, and for providing technical engineering and construction consultant and advisory services to the District Engineer, and other technical divisions within the Vicksburg District.

Duties

Makes major decisions related to the initiation, continuance, discontinuance, and scheduling of major projects. Establishes methods, procedures and requirements for program evaluation and management control of diverse programs and projects. Issues orders, directives, and general instructions, as required. Develops and formulates new methods, techniques, and procedures to resolve the more challenging, critical, unique, novel, and complex technical and engineering and construction management problems. Serves as the designated Vicksburg District Career Program Manager for the Engineers and Scientists Career Program and as such, administers the program in accordance with CPR 950-1.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• IAW AR 690-950, State Registration as a Professional Engineer is a requirement of this position.
• Position is designated as Non-Sensitive-No access is required.
• This position requires submission of Financial Disclosure Statement, OGE-450, upon entering the position and annually thereafter.
• This position is considered essential to support of DA's mobilization and wartime mission during periods of increasing tension or mobilization.
• This position is designated as Mission Essential.
• This position is supervisory as defined by the Office of Personnel Management's (OPM) General Schedule Supervisory Guide (GSSG). A one year probation to assess your ability to perform supervisory duties is required unless previously completed.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Department of Army Civilian EmployeesCurrent Department of Defense (DOD) Civilian Employee (non-Army)Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel WorkforceInteragency Career Transition Assistance PlanLand Management Workforce Flexibility ActMilitary Spouses, under Executive Order (E.O.) 13473Non-Department of Defense (DoD) TransferPriority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician EligiblePriority Placement Program, DoD Military Spouse Preference (MSP) EligiblePriority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability RetirementPriority Placement Program, DoD Retained Grade Preference EligibleVeterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Engineers: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the basic requirements above, to qualify for this position you must also meet the qualification requirements listed below: Specialized Experience: One year of specialized experience which includes: 1). Provides technical engineering and construction consultant and advisory services to the District Engineer, and other technical divisions. 2). Manages a diverse technical staff such as engineers, technicians, Geologists, and administrative staff. 3). Determines manpower requirements, funding, scheduling, programming capability of the Division to carry out proposed projects. 4). Oversees the full range of water resources engineering and construction projects. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-14). Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted. Selection Placement Factor:This position requires the possession of a current Professional Engineer (PE) issued by any State in the United States, the District of Columbia, Guam, or Puerto Rico. (You must attach current and valid documentation indicating your Professional Engineering registration number, the state in which you are registered, and the expiration date). You will be evaluated on the basis of your level of competency in the following areas: AccountabilityConflict ManagementDeveloping OthersStrategic Thinking Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-14).

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.

Contacts

• Address RG-W2R904 US ARMY ENGINEER DISTRICT-VICKSBURG DO NOT MAIL Vicksburg, MS 39183 US
• Name: Army Applicant Help Desk