This position is located in a U.S. Department of Agriculture (USDA), Natural Resources Conservation Service (NRCS) state, area, or field office within Idaho. The incumbent provides engineering assistance working with landowners, groups, and units of government to apply and maintain a variety of conservation practices in their area of assigned responsibility.

Duties

Provides civil engineering technician field assistance in support of NRCS conservation activities. Prepares detailed construction drawings for complex (Class 4 and above) engineering projects. Performs engineering surveys utilizing state-of-the-art global positioning system (GPS) technologies. Provides NRCS technical support and training leadership for computer-aided drafting and design software (CADD) users. Performs hydrologic and hydraulic computations such as determining sediment volumes, runoff curve number, time of concentration, weir flow, pipe flow, and open channel flow using NRCS engineering application software.

Requirements

• You must be a US Citizen or US National.
• Males born after 12/31/1959 must be Selective Service registered or exempt.
• Subject to satisfactory adjudication of background investigation and/or fingerprint check. If selected you will be sent instructions on obtaining fingerprints. Please note we are not able to reimburse any fees incurred for fingerprints.
• Successful completion of one-year probationary period, unless previously served.
• Direct Deposit--Per Public Law 104-134 all Federal employees are required to have federal payments made by direct deposit to their financial institution.
• Successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit E-Verify at https://www.e-verify.gov/.
• Must possess and maintain a valid state motor vehicle operator's license for the type of vehicle(s) operated to perform the duties of this position.

Qualifications

Applicants must meet all qualifications and eligibility requirements by the closing date of the announcement including time-in-grade restrictions, specialized experience and/or education, as defined below. AREA OF CONSIDERATION: Please note that this job opportunity announcement is only open to current Career/Career-Conditional employees of the NRCS and CTAP/RPL eligibles. If you do not possess this status, you will not receive consideration. TIME-IN-GRADE REQUIREMENTS: Merit promotion applicants must meet applicable time-in-grade requirements to be considered eligible. One year at the GS-07 level is required to meet the time-in-grade requirements for the GS-08 level. One year at the GS-08 level is required to meet the time-in-grade requirements for the GS-09 level. One year at the GS-09 level is required to meet the time-in-grade requirements for the GS-10 level. (Please submit your SF-50 that shows Time-in-Grade eligibility and reflects your title, series, and grade. No Award or General Adjustment SF-50's will be accepted). MINIMUM QUALIFICATIONS: To be considered minimally qualified for this position, you must demonstrate that you have the required specialized experience and/or education for the respective grade level(s) in which you are applying: GS-8 Specialized Experience: To qualify for the GS-08 level, you must possess at least one year of specialized experience equivalent to the GS-07 level or higher in Federal service, or comparable experience not gained through Federal service. This experience must include the following- Assisting with surveying and site investigations by collecting accurate, appropriate, and sufficient data for engineering designs; Gathering and completing packages of drawings and specifications to support engineering projects; and Working with landowners or other stakeholders to complete engineering projects. OR Substitution of education in lieu of specialized experience: Must have a Master's or equivalent graduate degree, or 2 full years of graduate education in engineering or other directly related field. (Must submit transcripts.) OR Combination of Education and Experience: Must possess a combination of specialized experience and graduate education as described directly above that total 100% when combined. First, determine total qualifying experience as a percentage of the specialized experience described above; then determine the education as a percentage of the graduate education described above; and then add the two percentages. The total percentages must equal at least 100 percent to qualify. Only graduate education in excess of one year (18 semester hours) may be used when combining education and experience for this grade. (Must submit transcripts.) GS-9 Specialized Experience: To qualify for the GS-09 level, you must possess at least one year of specialized experience equivalent to the GS-08 level or higher in Federal service, or comparable experience not gained through Federal service. This experience must include the following- Determining the scope and intensity of field investigations and surveys needed for an engineering project; Inspecting engineering projects to verify conformance to plans, policy, and guidelines; and Assisting with drafting and graphical work on a computer-aided drafting system (CAD). OR Substitution of education in lieu of specialized experience: Must have a Master's or equivalent graduate degree, or 2 full years of graduate education in engineering or other directly related field. (Must submit transcripts.) OR Combination of Education and Experience: Must possess a combination of specialized experience and graduate education as described directly above that total 100% when combined. First, determine total qualifying experience as a percentage of the specialized experience described above; then determine the education as a percentage of the graduate education described above; and then add the two percentages. The total percentages must equal at least 100 percent to qualify. Only graduate education in excess of one year (18 semester hours) may be used when combining education and experience for this grade. (Must submit transcripts.) GS-10 Specialized Experience: To qualify for the GS-10 level, you must possess at least one year of specialized experience equivalent to the GS-09 level or higher in Federal service, or comparable experience not gained through Federal service. This experience must include the following- Preparing cost estimates for engineering projects by identifying construction practices, methods, materials, cost, and equipment needed; Utilizing computer-aided drafting and design software (CADD) or other engineering design system hardware and software to complete and modify engineering drawings, develop three dimensional models and drawings for complex engineering projects, or calculate estimates; Developing engineering designs, drawings, and specifications using global positioning system (GPS) technologies; and Reviewing problems and issues with engineering projects to formulate and offer alternative solutions. OR Substitution of education in lieu of specialized experience: Must have a Ph.D. or equivalent doctoral degree, or 3 full years of graduate education in engineering or other directly related field. (Must submit transcripts.) OR Combination of Education and Experience: Must possess a combination of specialized experience and graduate education as described directly above that total 100% when combined. First, determine total qualifying experience as a percentage of the specialized experience described above; then determine the education as a percentage of the graduate education described above; and then add the two percentages. The total percentages must equal at least 100 percent to qualify. Only graduate education in excess of two years (36 semester hours) may be used when combining education and experience for this grade. (Must submit transcripts.) IN DESCRIBING YOUR EXPERIENCE, PLEASE BE CLEAR AND SPECIFIC. WE MAY NOT MAKE ASSUMPTIONS REGARDING YOUR EXPERIENCE. If your resume does not support your questionnaire answers, we will not allow credit for your response(s). Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. The OPM Qualification Standards for this position can be found at: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series

Education

You must submit a copy of your college transcripts or a list of college courses with credit hours, dates completed, and grades received to verify all education requirements (i.e. substitution of education and/or basic education requirement). If a relevant course is not clearly qualifying (e.g. special topic, seminar, research, thesis, obscure or misleading course title, etc.), please submit an official course syllabi and/or detailed course description from the university/college for that particular course to ensure you are properly evaluated. Please note that qualifications determinations are based solely on the information submitted for each particular vacancy announcement. You must document all requirements on every vacancy; we cannot use previous determinations as a basis for rating. All required information must be received by the closing date of this announcement, and non-submission of all required documents/documentation will result in non-consideration. Unofficial transcripts will be accepted. This information must be received by the closing date of this announcement. Non-submission of these documents will result in non-consideration.

Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Applicants must, therefore, only report attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education. Applicants can verify accreditation via this link. All education claimed by applicants will be verified accordingly. Important: If you are using foreign education to meet qualification requirements, you must send a Certificate of Foreign Equivalency with your transcript in order to receive credit for that education. Please check out this link for more information Recognition of Foreign Qualifications | International Affairs Office (ed.gov)

Contacts

• Address Natural Resources Conservation Service 1400 Independence Ave SW Washington, DC 20250 US
• Name: Staff Acquisition
• Phone: 8164265706
• Email: [email protected]