You will serve as a INTERDISCIPLINARY ENGINEER/COMPUTER SCIENTIST in the Avionics System Engineering Division, Avionics Engineering Department of NAVAIRWARCENAC DIV.

Duties

You will determine the direction of the technical work subject only to administrative review. You will conceive and develop major proposals for needs of the agency, and may be fully responsible for planning, directing, and achieving the success of a broad program. You will be responsible for defining objectives; interpreting policies promulgated by authorities which are senior to the immediate supervisor and determining their effect on program needs; and serving as a technical authority. You will be responsible for program development and/or oversight of a major NAVAIR level or Component/Command level program (or programs) relating to research, development, testing, evaluation, innovation, and reengineering. You will demonstrate outstanding technical leadership in a frontier area which influences major projects, proposals, and the direction of major work You will serve on panels and committees charged with the planning of broad agency resources to develop new systems/ programs.

Requirements

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade level. This requirement is called time-in-grade. Time-in-grade requirements must be met by the closing date of this announcement.
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
• This position is a designated Critical Acquisition Position (CAP). You must sign a three-year tenure agreement prior to assuming the position unless a tenure waiver is approved.
• Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.

Qualifications

Your resume must demonstrate at least one year of specialized experience at or equivalent to the GS- 12/13 grade level or pay band DP-04 in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: 1) Demonstrating software engineering acquisition knowledge and experience including agile software development process, requirement specification development, testing and risk management. 2) Strong time-management and tasking prioritization skillset. 3) Understanding of MBSE and data modeling approach and contribute to promote technical advancement for MOSA implementation. 4) Leadership ability demonstrated through providing technical oversight for team including civilians, contractors, members of academia and industry. 5) Providing a strong software engineering background and be able to review scripts, source code and documentation to provide direction to contractor team for improvement. 6) Demonstrating knowledge of Modular Open Systems Approach (MOSA) objectives/strategies as well as individual technical standards. 7) Coordinating with external stakeholders/customers to drive the technical advance in favor of NAWCAD. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

0850, 0855, 0854 Series

Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.

OR

Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org

OR

Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.

OR

Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)

OR

Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

1515 Series

A. Have a bachelor's degree in computer science.
OR
B. Have a bachelor's or higher degree with 30 semester hours in a combination of mathematics, statistics, and computer science. At least 15 of my 30 semester hours were in a combination of statistics and mathematics that included differential and integral calculus.

Contacts

• Address NAVAIRWARCENAC DIV Naval Air Warfare Center Patuxent River, MD 20670-5304 US
• Name: Department of Navy EIC
• Email: [email protected]