You will serve as a F-35 Training and Support Systems (TSS) Assistant Program Manager for Systems Engineering (APMSE) in the F-35 Air Platform System Engineering Branch and Systems Engineering Department of Naval Air System Command-Aircraft Division (NAWCAD). As the APMSE, you will provide multi-disciplinary support for the F-35 Air System in PEO (JSF) and will be responsible for providing engineering and technical support to the Joint Simulation Environment (JSE) team.

Duties

You will be responsible for planning, assigning, managing, and coordinating engineering tasks for a major aviation program. You will develop and review program technical and mission documentation, provide authoritative input and advice on all engineering and technical issues and ensure engineering requirements are met. You will participate in the development and design of new systems by assessing if available or imminent technology is sufficient to meet requirements or system concepts are applicable to fleet operational requirements. You will recommend revisions to operational requirements or design concepts as required. You will formulate engineering design concepts and performance requirements which provide the basis for overall technical and engineering planning for the assigned system. You will accomplish other duties as assigned.

Requirements

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade level. This requirement is called time-in-grade. Time-in-grade requirements must be met by the closing date of this announcement.
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
• Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.
• Special Note: If selected, your salary will be set according to the established control points of this position, which is $139,395 p.a. - $181,216 p.a.

Qualifications

In addition to meeting basic education requirements for this position, your resume must demonstrate at least one year of specialized experience equivalent to the STRL DP-04 Pay Band or equivalent GS Grade Level (GS-12/13) in the Federal Service or equivalent experience in the private or public sector. Examples of specialized experience for this position include: 1) Provide authoritative input and advice on all engineering and technical issues to ensure aviation system engineering requirements are met; 2) Develop project-planning objectives for engineering development of current and long range programs; 3) Perform or direct technical analyses required during the development phase; 4) Assist in the preparation, planning and development of integrated logistics support plans for assigned aviation systems; 5) Maintain continuous contact with research and development personnel in order to be informed on all new engineering and scientific developments of assigned aviation systems; and 6) Organize and perform technical reviews to ensure adequate resources for assigned aviation systems. Additional education and qualification information can be found from the following Office of Personnel Management websites: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.

OR

Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org

OR

Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.

OR

Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)

OR

Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

For additional education and qualification information, you may refer to following Office of Personnel Management websites:
https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf

Contacts

• Address NAVAIRWARCENAC DIV Naval Air Warfare Center Patuxent River, MD 20670-5304 US
• Name: Department of Navy EIC
• Email: [email protected]