This is a public notice flyer to notify interested applicants of anticipated vacancies. Applications will not be accepted through this flyer. Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered. There may or may not be actual vacancies filled from this flyer. Notice of Result letters will not be sent to applicants who respond to this flyer.

Duties

You will serve as a Subject Matter Expert for the evaluation and acceptance of new electrical system and equipment installations. You will review and contribute to electrical designs to assure plans and specifications provide a constructable and code compliant installation and enforceable documentation for inspections and construction quality control. You will provide design, construction, commissioning and acceptance testing support to the command for the full range and complexity of facilities and systems provided. You will provide detailed scopes of work and cost estimates of labor and material for repairs and new designs developed by or for the supported command. You will conduct engineering evaluations to determine conditions of existing electrical and lighting systems and equipment. You will provide technical support by reviewing submittals, preparing estimates for modifications, and performing quality assurance activities. You will participate in periodic and special inspections including witnessing equipment acceptance testing during manufacture and construction and/or upon completion of projects. You will monitor and inspect the installation and testing of low and medium voltage distribution and lighting systems and equipment for compliance with plans, applicable codes and standards, and accepted installation techniques (means and methods). You will apply extensive experience and skill regarding, the acceptable means and methods associated with the installation of electrical and lighting equipment and systems including overcurrent protection, grounding and bonding, and wiring methods.

Requirements

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to obtain and maintain an interim and/or final secret security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• This position requires current registration as a Professional Engineer (PE) in any state, District of Columbia, Guam or Puerto Rico at the GS-13 level.
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
• You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.
• You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment.
• This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.

Qualifications

The GS-13 position has a selective placement factor in additional to the basic education. The selective placement factor is: Applicants must have a current registration as a Professional Engineer (PE) from any state, the District of Columbia, Guam or Puerto Rico. If you meet this requirement, you must provide a copy of your current registration with your application. For the GS-13 level: In additional to the basic education and PE license requirement, your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: 1) Leading the production of construction document (plans, specifications, and design drawing) for large and/or highly complex buildings (i.e., multi-story office buildings, training facilities, multi-purpose buildings, aircraft hangars, medical facilities maintenance shops, food service facilities, and/or large housing projects) on design-build requests for proposal; 2) Reviewing facilities construction submittals for conformance to the requirements of electrical engineering contract drawings / specifications; 3) Resolving electrical engineering construction and design issues encountered during the performance of facilities contracts; 4) Performing engineering services in support of Architectural and Engineering Contracts such as writing statements of work, estimating fees, negotiation, performance monitoring, and evaluation of bids; and 5) Mentoring junior electrical engineers. 6. Professional Engineering license required. NOTE: This information must be fully supported in your resume. For the GS-12 level: Your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-11 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: 1) Serving as consultant on electrical engineering aspects to other engineering disciplines on projects that are not predominately electrical; 2) Providing design and other technical expertise for the organization; 3) Preparing detailed electrical engineering analyses, calculations, and designs; 4) Assisting with the review of progress on projects to ensure the work is within budget and completed within the execution schedule; 5) Assisting with the review of contractor submittals of shop drawings, samples of materials and components, catalog information and certificates of compliance with the contract requirements and intent; and 6) Preparing outlines of services, scope of work, government construction estimates and engineering fee estimates for work to be performed under Architect-Engineer (A&E) contract. NOTE: This information must be fully supported in your resume. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series; https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf; AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/mechanical-engineering-series-0850/ Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants for the Professional Engineering Series must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
OR
Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org
OR
Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.
OR
Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements above. The courses must be fully acceptable toward meeting the requirements of an engineering program as described above.
OR
Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

Contacts

• Address NAVAL FAC ENGINEERING CMD WASH 1001 North St SE 208 Washington, DC 20020 US
• Name: NAVFAC Washington Human Resources Office
• Phone: (202) 685-0616
• Email: [email protected]