The typical season for these positions is October through April but can be variable during these months due to weather conditions, project needs, or funding. Anticipated Entry on Duty: October, 2024.

Duties

Major Duties: Perform preservation carpentry including structural framing, reconstruction of windows and doors, and finish carpentry using a variety of power and hand tools. Perform preservation masonry including chiseling, mortar analysis and mixing, and repointing of historic features using hand tools. Perform preservation painting including color matching, paint mixing, and application of paints, stains, and varnishes. Perform historic preservation roofing including repairs to flashing, shingles, and architectural elements while working on scaffolding or in elevated work platforms. Perform other misc. duties related to historic preservation including plastering, metalwork, and condition assessment. Physical Demands:The incumbent performs work at construction sites. There is considerable physical exertion related to actions such as lifting, pushing, pulling, or carrying objects of various sizes, weights, and shapes. There is considerable standing, stooping, lifting, and bending. Because of the multi-faceted craft aspects of this position, work is frequently performed under structures, which requires the incumbent to work overhead or in a stretched, cramped, or awkward position. Fieldwork magnifies the physical effort required to perform the duties of this position and reflect actual restoration project environments. Incumbent is required to perform craftsman work in the investigation of historic structures and in working with other employees in restoration techniques. Inspections may require working in cramped, close quarters underneath structures or on rooftops several hundred feet above ground level. The incumbent occasionally may lift and carry items that weigh 50 pounds or more. Backcountry work may require the incumbent to hike or ride by horseback to the job site in remote locations over rough terrain. Working Conditions: Work is performed throughout the Park, where the incumbent is subject to cuts from hand or power tools and danger from flying splinters or chips. In the shop the incumbent is exposed to noise and sawdust in the air. The presence of lead paint on historic fabric may require special knowledge and handling and the use of protective equipment in the shop or at the job site, and require special attention and the use of safety equipment. Work is both inside and outside, in all types of weather. The incumbent must work at elevations from sea level to above 4,000 feet. Temperatures vary from -20 to 90+ degrees. Winter snow depths may vary from two to six feet with icy driving conditions involved. The incumbent may be exposed to snow and ice conditions in winter and rain and wind in summer. Must have and maintain a valid state driver's license. Work is performed in all types of weather, both indoor and outdoors. Considering the nature of historic structures and the unknown structural characteristics, field inspections may contain some hazardous conditions (e.g., asbestos, PCBs). Yosemite National Park, California, known worldwide for its spectacular natural beauty is the backdrop for this position. Sitting astride the Sierra Nevada Mountains, the park covers 1,182 square miles of varied wilderness ecosystems, from river valleys to alpine meadows to lofty 13,000 foot high peaks. Yosemite Valley is located 208 miles from San Francisco, 81 miles from Merced, and 94 miles from Fresno. Shopping, medical, postal and laundry services are available in the park. Elevation at the Valley floor is approximately 4,000 feet and 2,200 feet in El Portal. The park is open year-round with the majority of activities occurring during the busy season March through October.

Requirements

Qualifications

To qualify for this position, you must have sufficient knowledge and ability in the following job-related factors: Ability To Do The Work of a WG-4701-09 Preservationist Without More Than Normal Supervision (SCREEN OUT) Ability To Interpret Instructions, Specification, etc. (includes blueprinting reading) Ability To Use and Maintain Tools and Equipment Knowledge of Equipment Assembly, Installation, Repair, etc. Knowledge of Materials Technical Practices (theoretical, precise, artistic) Use of Measuring Instruments If your knowledge and ability in the SCREEN OUT factor above is not sufficient, you will receive no further consideration. In preparing your application, describe in detail the experience and training which you have had that specifically prepared you for this job and to perform the duties described for this job. Experience should be clearly described and documented in your resume. The qualifications reviewer will not assume performance of such duties by Job Titles alone. Address your knowledge, skills and/or abilities in the areas shown in the job-related factors. Volunteer Experience: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. CTAP/ICTAP STATEMENT: Current surplus and current or former displaced Federal individuals who have special priority selection rights under the Agency Career Transition Assistance Program (CTAP) or the Interagency Career Transition Assistance Program (ICTAP) must be well qualified for the position to receive consideration for special priority selection. Well qualified means that the applicant meets the following: OPM qualification standards for the position; all selective placement factors, where applicable; special qualifying conditions that OPM has approved for the position, where applicable; is physically qualified with reasonable accommodation, where appropriate to satisfactorily perform the duties of the position upon entry; and is rated by the organization at least at the well qualified level on all competencies. Federal employees seeking CTAP/ICTAP eligibility must submit proof that they meet the requirements of 5 CFR 330.605(2) for CTAP and 5 CFR 330.704 for ICTAP. This includes a copy of the agency notice, a copy of their most recent Performance Rating, and a copy of their most recent SF-50 noting current position, grade level, and duty location. Please annotate your application to reflect that you are applying as a CTAP/ICTAP eligible. If you are selected for Federal employment, you will be required to fill out a Declaration of Federal Employment, OF-306, prior to being appointed to determine your suitability for Federal employment and to authorize a background investigation. Failing to answer all questions truthfully and completely or providing false statements on your application may be grounds for not hiring you, or for firing you after you begin work. Also, you may be punished by fine or imprisonment (U.S. Code, Title 18, section 1001). }}

Education

There is no substitution of education for experience for Wage Grade (WG) positions.

Contacts

• Address Yosemite National Park 5037 Stroming Road Mariposa, CA 95338 US
• Name: Daniel Garner
• Email: [email protected]