This is a public notice flyer to notify interested applicants of anticipated vacancies. Applications will not be accepted through this flyer. Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered. There may or may not be actual vacancies filled from this flyer. Notice of Result letters will not be sent to applicants who respond to this flyer.

Duties

You will serve as a NUCLEAR ENGINEER (0840)/HEALTH PHYSICIST (1306) in the HEALTH PHYSICS BRANCH, RADIATION HEALTH DIVISION, RADIOLOGICAL CONTROL OFFICE, PORTSMOUTH NAVAL SHIPYARD, ME. You will perform technical Health Physics/ Nuclear Engineering projects in support of the Radiation Health Program. You will develop project designs and protocols for research and development work on methods, techniques, work processes, equipment and instrumentation of health physics/nuclear engineering. You will investigate and determine resolutions of any conflicting/inadequate/unexpected data or results identified in the course of the project. You will provide information to key managers and training instructor on current issues of radiation health/nuclear power reactor matters that relate to the Shipyard.

Requirements

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.

Qualifications

Basic Education Requirement: 0840: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.) 1306: Degree: natural science or engineering that included at least 30 semester hours in health physics, engineering, radiological science, chemistry, physics, biology, mathematics, and/or calculus. or Combination of education and experience -- courses as shown in A above, plus appropriate experience or other education; or certification as a health physicist by the American Board of Health Physics, plus appropriate experience and other education that provided an understanding of sciences applicable to health physics comparable to that described in paragraph A. Experience: GS-12: In addition to the basic education requirement above, your resume must also demonstrate at least one year of SPECIALIZED experience at or equivalent to the GS-11 grade level or pay band in the Federal service or equivalent experience in the private or public sector: Experience developing, planning, organizing, and preparing project designs and protocols for research and development work on methods, techniques, work processes, equipment and instrumentation assuring compliance with existing regulations. Experience coordinating, monitoring, reviewing, and integrating efforts of engineers, consultants, physicists, mechanics and others. Experience applying nuclear engineering/health physics concepts, principles, and practices, as well as administrative techniques applicable to planning and carrying out an assigned Shipyard radiation health program. Experience applying a complex understanding of the effects of the nuclear environment upon equipment, systems materials, and personnel and the use of quantitative measurement and engineering techniques, for evaluating the magnitude of radiation health conditions. GS-11: In addition to the basic education requirement above, your resume must also demonstrate at least one year of SPECIALIZED experience at or equivalent to the GS-09 grade level or pay band in the Federal service or equivalent experience in the private or public sector: Experience developing, planning, organizing, and preparing project designs and protocols for research and development work on methods, techniques, work processes, equipment and instrumentation assuring compliance with existing regulations. Experience coordinating, monitoring, reviewing, and integrating efforts of engineers, consultants, physicists, mechanics and others. Experience developing a comprehensive knowledge of nuclear engineering/health physics concepts, principles, and practices, as well as administrative techniques applicable to planning and carrying out an assigned Shipyard radiation health program. Experience gaining and understanding of the effects of the nuclear environment upon equipment, systems materials, and personnel and the use of quantitative measurement and engineering techniques, for evaluating the magnitude of radiation health conditions. Additional qualification information can be found from the following Office of Personnel Management website: 0840: all-professional-engineering-positions-0800.pdf (opm.gov) 1306: Health Physics Series 1306 (opm.gov) Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Basic Education Requirement:
0840:
A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)

1306:

1. Degree: natural science or engineering that included at least 30 semester hours in health physics, engineering, radiological science, chemistry, physics, biology, mathematics, and/or calculus.

   or

2. Combination of education and experience -- courses as shown in A above, plus appropriate experience or other education; or certification as a health physicist by the American Board of Health Physics, plus appropriate experience and other education that provided an understanding of sciences applicable to health physics comparable to that described in paragraph A.

SUBSTITUTION OF EDUCATION FOR EXPERIENCE: Applicants may substitute the following education for the required experience, provided it demonstrates the knowledge, skills and abilities necessary to do the work of the position:
GS-12: NOT APPLICABLE
GS-11: 3 years of progressively higher level graduate education leading to a Ph.D. degree or Ph.D. or equivalent doctoral degree

COMBINATION OF EDUCATION AND EXPERIENCE: Equivalent combinations of education and experience may be combined to meet the total qualification requirements.
If you are using education to meet all or part of the qualification requirements, you must submit a copy of your transcripts or an itemized list of college courses which includes equivalent information from the transcript (course title, semester/quarter hours, and grade/degree earned) in your resume.

IF CLAIMING EDUCATION, FAILURE TO SUBMIT TRANSCRIPTS/ITEMIZED LIST WILL RESULT IN AN INELIGIBLE RATING. See OPM's General Policies for information on crediting education. Education completed in foreign colleges or universities may be used to meet the qualification requirements if the applicant can provide documentation indicating that the foreign education is comparable to that received in an accredited educational institution in the United States. It is the responsibility of the applicant to provide such evidence when applying for further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

Contacts

• Address PORTSMOUTH NAVAL SHIPYARD HRO Building 44/1 Portsmouth, NH 03804-5000 US
• Name: Thomas Jablonski II
• Email: [email protected]