Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information. The primary purpose of this position is to serve as a professional electronics engineer and systems engineer for assigned program(s) and projects and performs work to plan, analyze, and evaluate engineering and technical efforts used to define total range systems/subsystem requirements, translate requirements into design criteria, evaluate alternative design approaches.

Duties

Performs professional electronics engineering work in support of the acquisition, development, or sustainment of weapon systems, subsystems, and/or support equipment. Develops system performance requirements, objectives and integration, and the estimation of time and resources for system and support facility design, development, and support. Performs analysis and uses systematic, disciplined, and quantifiable approaches to implement, develop, and document projects. Performs development engineering for systems and devices.

Requirements

• U.S. Citizenship Required
• Males must be registered for Selective Service, see www.sss.gov
• Selectee is expected to be granted with and/or maintain the appropriate security clearance required for the position.
• Relocation costs or other incentives may be available and considered by the organization.
• The position is subject to provisions of the DoD Priority Placement Program
• This position may require drug testing and the candidate may be subject to passing a drug test upon selection.
• Employee may be required to work other than normal duty hours, to include evenings, weekends and/or holidays
• Shift work and emergency overtime may be required
• Employee must maintain current certifications
• Disclosure of Political Appointments
• Direct Deposit: All federal employees are required to have direct deposit.
• This position may require travel. Work may occasionally require travel away from the normal duty station on military or commercial aircraft.
• Selectee may be required to serve a probationary or trial period.
• A degree in Engineering Technology is not qualifying for this position.
• The work may require the employee to drive a motor vehicle. An appropriate, valid driver's license may be required for the position.
• This position has been designated as an acquisition position and is covered by the Acquisition Professional Development Program (APDP).
• Work requires the appropriate APDP certification(s); i.e., Level 2 or 3
• Certification in areas such as Test and Evaluation (T and E); Systems Planning, Research, Development, and Engineering-Systems Engineering (SPRDE-SE); or Systems Planning, Research, Development, and Engineering-Program Systems Engineer (SPRDE-PSE).

Qualifications

Experience requirements are described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, Professional and Engineering Positions. Due to the use of 120-day rosters, this period of experience may be completed within 120 days of the closing date of this announcement. BASIC REQUIREMENT OR INDIVIDUAL OCCUPATIONAL REQUIREMENT: Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR COMBINATION OF EDUCATION AND EXPERIENCE: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.) In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: SPECIALIZED EXPERIENCE: A. I have, or within 120 days, will have 52 weeks (one year) of specialized experience which is equivalent to Federal experience at the next lower grade (GS-11) level or equivalent (grade level, pay schedule, pay band, etc.) and is described in detail in my resume. An example of creditable specialized experience includes: knowledge of a wide range of electronics engineering theories, concepts, principles, standards, and methods sufficient to determine and/or execute actions for a wide range of assignments involving combinations of complex features; knowledge of engineering standards and methods to formulate, execute, advise on, and explain recommendations of solutions to modify standard practices, equipment, devices, processes, and techniques and resolve a wide variety of complex problems NOTE: Due to the use of 120-day rosters, this period of experience may be completed within 120 days of the closing date of this announcement. FEDERAL TIME-IN-GRADE (TIG) REQUIREMENT FOR GENERAL SCHEDULE (GS) POSITIONS: Merit promotion applicants must meet applicable time-in-­grade requirements to be considered eligible. One year at the GS-11 level is required to meet the time-in-grade requirements for the GS-12 level. TIG applies if you are in a current GS position or held a GS position within the previous 52 weeks. KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: 1. Knowledge of professional electronics engineering concepts, principles, practices, standards, methods, techniques, materials, and equipment to effectively apply engineering theories, principles, and concepts to system design, architecture, and integration. 2. Knowledge of systems engineering issues and best practices sufficient to plan, design, test, troubleshoot, evaluate, and oversee the development and/or sustainment of electronic systems or devices. 3. Knowledge of other engineering disciplines and standard acquisition regulations, practices, and procedures. 4. Ability to analyze data and establish requirements for technical objectives and characteristics. 5. Ability to communicate clearly, concisely, and with technical accuracy, both orally and in writing, as well as work in a professional manner with peers, management, contractors, academia, and other agencies. 6. Ability to use computer applications in support of planning, designing, analysis, and reporting. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Education

IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience, transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation.

FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying.

Contacts

• Address AF Test Center 6437 6th Street Bldg 430, Rm 119 Hill AFB, UT 84056 US
• Name: Total Force Service Center
• Phone: 1-800-525-0102
• Email: [email protected]