About the Position: As the Army's primary integrator of C5ISR technologies and systems, the U.S. Army Command, Control, Communications, Computers, Cyber, Intelligence, Surveillance and Reconnaissance (C5ISR) Center conducts Research and Development, or R&D, across a wide variety of capability areas that support all of the Army's Modernization priorities. This is an Interdisciplinary position and may be filled with any of the listed occupations.

Duties

Performs work in the Radio Frequency (RF) domain which consists of systems, subsystems, software, techniques or analysis. Specialty areas of work include tactical communications (terrestrial and satellite), electronic warfare (EW), radar, signals intelligence (SIGINT). Specialty areas of work also include positioning/navigation/timing (PNT), and RF sensors for humanitarian demining and improvised explosive device (IED) detection. Plans, and conducts projects considered to be of primary importance in achieving new concepts, configurations and performance characteristics that may result in establishing new theories and a deeper understanding of phenomena. Applies a very high degree of imagination and creativity in the solution of problems of marked importance for which there is almost a complete absence of applicable guidelines, pertinent literature and methodology. Develops interpretations and procedures that extend or supplant existing knowledge/methodology due to nonexistent or controversial experimental data available. Serves as a spokesperson and/or principal investigator for the organization in the specialty field.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• Extended probationary period for the Engineers and Scientists Occupational Family is three years.
• Incumbent is required to submit a Financial Disclosure Statement, OGE-450 upon entering the position and annually, in accordance with DoD Directive 5500-7-R, Joint Ethics Regulation, dated 17-Nov-2011.
• This is an Army Acquisition, Logistics and Technology Workforce position. Selectee must meet position requirements for Engineering and Technical Management certification within 60 months as of entrance on duty.
• Must be able to obtain and maintain a Top-Secret Security Clearance with Sensitive Compartmented Information (SCI) access.
• This position is covered by the Alcohol and Drug Abuse Prevention and Control Program. The incumbent is required to sign a DA Form 5019-R and must pass urinalysis testing, as required prior to appointment and periodically thereafter.
• Temporary Business Travel is required approximately more than 25% of the time away from the duty station.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Department of Army Civilian EmployeesDomestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel WorkforceInteragency Career Transition Assistance PlanLand Management Workforce Flexibility ActMilitary Spouses, under Executive Order (E.O.) 13473Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician EligiblePriority Placement Program, DoD Military Spouse Preference (MSP) EligiblePriority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability RetirementPriority Placement Program, DoD Retained Grade Preference EligibleVeterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. To qualify at the DB-04/GS-14 grade level, in addition to meeting the basic education requirement listed below, you must have one year of specialized experience at the next lower grade level. Specialized Experience is defined as experience equivalent to the DB-03 pay band (or GS-13 grade level or higher equivalency) in the Federal Service which includes experience in (1) The evaluation/design of engineering/ computer science concepts supporting Radio Frequency, Electronic Warfare, Signals Intelligence or Radar technology; (2) Manage tactical communication technology or Radio Frequency development programs; (3) Solve critical technical and analysis problems of great importance to the scientific field to move technology forward into the next generation. Transcripts are required to meet the Basic Education for the applicable series. 800 Series Basic Education Requirement for a Supervisory Engineer (0801, 0830, 0850, 0854, 0855): A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1.Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2.Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3.Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4.Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (You MUST submit a copy of your transcripts along with a letter of reference stating that you have at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. The letter must be signed by the engineer who provided the professional engineer supervision. It must also include their name, phone number, and list their engineer credentials such as engineer education or professional certificates). Basic Requirement for Computer Scientist: Degree: Bachelor's degree (or higher degree) in computer science or bachelor's degree (or higher degree) with 30 semester hours in a combination of mathematics, statistics, and computer science. At least 15 of the 30 semester hours must have included any combination of statistics and mathematics that included differential and integral calculus. You will be evaluated on the basis of your level of competency in the following areas: Creativity and InnovationProblem SolvingResearch and Development

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html.

Contacts

• Address FN-W4G8AA US ARMY COMBAT CAPABILITIES DEV CMD DO NOT MAIL Aberdeen Proving Ground, MD 21005 US
• Name: Army Applicant Help Desk