About the Position: You will Serve as a Program Manager (PM) and District Support Team Leader (DSTL) in the Military Integration Division to manage the funding, program management and coordination activities of the toxic and hazardous waste clean-up programs of the Environmental Protection Agency (EPA) Superfund and Department of Defense (DOD) Defense Environmental Restoration Program (DERP).

Duties

Management of funding, program management and coordination activities for ENV Programs. Provide staff direction and operational responsibilities including management information systems of the EPA Superfund, DOD DERP/FUDS, and other assigned ENV Programs. Assure compliance with functional requirements, funding and schedule constraints. Provides independent engineering investigations of problems and makes recommendations that will lead to resolution of these problems. Assure the efficient, effective, and timely accomplishment and coordination of the planning, design, and construction phases. Provide expert project management for Defense Environmental Restoration Program (DERP) - Formerly Used Defense Sites (FUDS) projects of high dollar value, of national priority, of environmental sensitivity, of extraordinary urgency. Assist in the preparation of the project budget and contracts. Serves on A/E and Contract selection boards as an engineering expert when requested by the Districts. Ensure compliance with program requirements to include environmental law, fiscal law, acquisition compliance, Value Engineering, and the Project Management Business Process (PMBP) requirements. Ensure Project Management Business Process (PMBP) compliance to include P2 reporting, Project Management Plans, Consolidated Command Guidance (CCG) metrics for Environmental Programs, etc.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Department of Army Civilian EmployeesCurrent Department of Defense (DOD) Civilian Employee (non-Army)Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel WorkforceInteragency Career Transition Assistance PlanLand Management Workforce Flexibility ActMilitary Spouses, under Executive Order (E.O.) 13473Non-Department of Defense (DoD) TransferOffice of Personnel Management (OPM) Interchange Agreement EligiblePeople with Disabilities, Schedule APostal Service/Peace Corps and Other Unique AuthoritiesPriority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician EligiblePriority Placement Program, DoD Military Spouse Preference (MSP) EligiblePriority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability RetirementPriority Placement Program, DoD Retained Grade Preference EligibleReinstatementVeterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Engineering: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. ***SEE EDUCATION SECTION FOR THE BASIC REQUIREMENTS FOR ADDITIONAL SERIES BEING CONSIDERED FOR THE POSITION*** *** In addition to meeting the basic requirement for the series you wish to be considered for, to qualify for this position you must also meet the qualification requirements listed below:*** Specialized Experience: One year of specialized experience which includes Provides expert advise and guidance on clean up of toxic and hazardous waste sites under the Department of Defense Environmental Restoration Program (DERP)/Formerly Used Defense Sites (FUDS) as well as analyzing contracts for adherence to work plan and EPA requirements. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-12 or above). Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted. You will be evaluated on the basis of your level of competency in the following areas: Project ManagementQuality AssuranceQuality ManagementStakeholder ManagementTechnical Competence Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-12).

Education

Basic Requirement for Physical Scientist:

A. Degree: Bachelor's degree (or higher degree) in physical science, engineering, or mathematics that included 24 semester hours in physical science and/or related engineering science such as mechanics, dynamics, properties of materials, and electronics.-OR-
B. Combination of Education and Experience: Courses equivalent to one of the majors, as shown in A above, that included at least 24 semester hours in physical science and/or related engineering science, plus appropriate experience or additional education.

Basic Requirement for Geologist

A. Degree: Bachelor's degree (or higher degree) in geology, plus 20 additional semester hours in any combination of mathematics, physics, chemistry, biological science, structural, chemical, civil, mining or petroleum engineering, computer science, planetary geology, comparative planetology, geophysics, meteorology, hydrology, oceanography, physical geography, marine geology, and cartography.-OR-
B. Combination of Education and Experience: Course work as shown in A above, plus appropriate experience or additional education. (Note: Acceptable experience may have been gained through geological field or laboratory work that provided a means of obtaining professional knowledge of the theory and application of the principles of geology and closely related sciences, e.g., geophysics, geochemistry, or hydrology. Such work generally must have involved making close observations, taking samples, handling various types of instruments and equipment, assembling geologic data from source materials, and analyzing and reporting findings orally and in writing. In some situations, professional scientific experience in other fields may be accepted in part as professional geological experience. Such experience must have been preceded by appropriate education in geology or by professional geological experience, and must have contributed directly and significantly to the applicant's professional geological competence. To receive credit for geological experience obtained in positions that are not full-time professional geological positions, the applicant is responsible for indicating clearly the actual time or percentage of time devoted to geologic duties within such positions, and for giving adequate descriptions of the geologic functions.)

Basic Requirement for Chemist:

A. Degree: Bachelor's degree (or higher degree) in the physical sciences, life sciences, or engineering that included 30 semester hours in chemistry, supplemented by course work in mathematics through differential and integral calculus, and at least 6 semester hours of physics.-OR-

B. Combination of Education and Experience: Course work equivalent to a major in the physical sciences, life sciences, or engineering, including at least 30 semester hours in chemistry, supplemented by mathematics through differential and integral calculus, and at least 6 semester hours of physics, plus appropriate experience or additional education.

Basic Requirement for Industrial Hygienist:

A. Degree: Bachelor's or graduate (or higher level) degree in industrial hygiene, occupational health sciences, occupational and environmental health, toxicology, safety sciences, or related science. The education must be accredited by an accrediting body recognized by the U.S. Department of Education at the time the degree was obtained. -OR-
B. Related Degree: Bachelor's degree in a branch of engineering, physical science, or life science that included 12 semester hours in chemistry, including organic chemistry, and 18 additional semester hours of courses in any combination of chemistry, physics, engineering, health physics, environmental health, biostatistics, biology, physiology, toxicology, epidemiology, or industrial hygiene. The education must be accredited by an accrediting body recognized by the U.S. Department of Education at the time the degree was obtained. For engineering degrees to be acceptable, the curriculum must be in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technicology (ABET) as a professional engineering curriculum. -OR-
C. Certification from the American Board of Industrial Hygiene (ABIH).

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.

Contacts

• Address RH-W2SJAA US ARMY ENGINEER DIVISION-NORTHWESTERN DO NOT MAIL Portland, OR 97208 US
• Name: Army Applicant Help Desk