This is a public notice flyer to notify applicants of anticipated vacancies through the DHA - Domestic Defense Industrial Base Facilities/ Major Range and Test Facilities Base in the DoD. Applications will not be accepted through this flyer. Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered. There may or may not be actual vacancies filled from this flyer. Notice of Result letters will not be sent to applicants who respond to this flyer.

Duties

You will perform traditional, Non-Destructive Inspection {NOi) of castings, forgings, machined parts, test plates, etc., utilizing NOi test equipment and chemicals applicable to the total range of nondestructive examination methods. You will calibrate and operate test equipment such as eddy current testing (ET) equipment, magnetic particle testing (MT) equipment, penetrant testing (PT) equipment, visual testing (VT) equipment and temper etch (TE) equipment. You will inspect parts for flaws or defects, discontinuities in patterns, interpret indications, and document flaws or defects in material and prepare reports on defective parts. You will work with subordinate inspectors to set the pace and demonstrate proper inspection methods and may be required to work with trainees.

Requirements

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to successfully complete a pre-appointment physical examination.
• This is a bargaining unit position.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
• Position requires heavy lifting over 40 pounds and carrying of objects up to 40 pounds. Any weight to be lifted in excess of 40 pounds will not be attempted unaided.
• Inspections may be performed in a dark spaces using UV black light requiring UV protection.
• Subject to various noise levels, which continuously exceeds 85 dBA. NOTE: Hearing protection must be worn for noise a level of 85 dBA and double protection is required for levels over 105 dBA.
• Near vision correctable at 14" to Jaeger 2 and far vision correctable to 20/20 in one eye. Incumbent must be able to distinguish color.
• This position requires normal physical functions and works at heights up to 40 feet.
• May be required to work as a radiation barrier monitor in radiation areas where X-Ray is being used and required to wear proper monitoring equipment for ionizing radiation.
• You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
• Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.

Qualifications

Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is:1) Traditional NDT or NDI of ferrous and non-ferrous materials, subassemblies, and components in accordance with specifications and directives; 2) Locating, identifying and measuring surface or sub-surface defects; 3) Operating NDI/NDT equipment according to technical manuals/directives for the particular type of test equipment; documenting inspection results; and 4) Complying with all required safety regulations. Additional qualification information can be found from the following Office of Personnel Management website. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

This job does not have an education qualification requirement.

Contacts

• Address FLTREADCEN SOUTHEAST Fleet Readiness Center Southeast Building 101 Jacksonville, FL 32212 US
• Name: Roger Collamati
• Email: [email protected]