Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information. The primary purpose of this position, COMPOSITE/PLASTIC FABRICATION INSPECTOR, WG-4352-11, is to inspect aircraft surfaces for damage, integrity, deviations and other out of tolerance conditions affecting Low Observable (LO) coatings and make sure they are within acceptable trade standards and specifications, and that the organization is turning out quality work.

Duties

Inspect all composite or plastic parts, assemblies, sub-assemblies or structures with straight and curved surfaces that have a number of interconnecting parts and components that have been repaired, modified or overhauled. Perform a complete inspection of equipment, all aircraft surfaces for damage, integrity, deviations and other out of tolerance conditions affecting Low Observable (LO) coatings and related components after work has been completed on the aircraft. Conduct and witness inspections and tests on a variety of fabricated and repair work performed by others on structural and nonstructural airframe components, equipment, and completed airframes affecting Low Observable coatings and related components. Utilize safety practices and procedures following established safety rules and regulations and maintains a safe and clean work area. Use knowledge of advanced shop mathematics including geometric and trigonometric formulas to calculate and devise patterns involving straight and curved edges or irregular curves, angles and planes.

Requirements

• U.S. Citizenship Required
• Males must be registered for Selective Service, see www.sss.gov
• This posn is subject to provisions of the DoD Priority Placement Program
• Disclosure of Political Appointments
• Must be able to qualify for license/permit to operate required vehicles and aerospace ground equipment.
• Must be able to pass a physical examination required to work around toxic chemicals and be able to wear the proper personal protective equipment (PPE). THIS POSITION REQUIRES A PRE-EMPLOYMENT PHYSICAL.
• May be required to work an uncommon tour of duty, scheduled and unscheduled overtime, or rotating shifts.
• This position may require travel.
• This position may require drug testing and the candidate may be subject to passing a drug test upon selection.
• Selectee is expected to be granted with and/or maintain the appropriate security clearance required for the position.
• Selectee may be required to serve a probationary or trial period.
• Relocation costs or other incentives may be available and considered by the organization.

Qualifications

In order to qualify, you must meet the specialized experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C. QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-4300 Pliable Materials Work Family. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time. The screen out element for this position is ABILITY TO DO THE WORK OF THE POSITION WITHOUT MORE THAN NORMAL SUPERVISION. JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: Knowledge of Equipment Assembly, Installation, Repair, etc. Technical Practices (Theoretical, precise, artistic) Use of Measuring Instruments Ability to Interpret Instructions, Specifications, etc. (Includes blueprint reading) Ability To Use and Maintain Tools and Equipment Knowledge of Materials PHYSICAL DEMANDS: Work encompasses standing, bending, stooping, stretching and working in strained and cramped conditions. Frequently handles, lifts, and carries items weighing up to 25 pounds and occasionally lifts and moves heavier items with assistance from others or with weight lifting equipment. May be required to uncrate or load and move metal/composite parts and other repair items. WORK ENVIRONMENT: Works both inside and outside and is subjected to noise and vibration from shop machines, high temperatures from curing ovens and heat lamps and to a variety of weather conditions. Work conditions frequently include exposure to dust, fumes, and toxic and/or potentially flammable and explosive chemicals that can cause skin, eye, and lung irritations. Employee could also be exposed to injury while operating machines and power tools. Required to wear safety glasses, hearing protection and other personal protective equipment (PPE) when performing duties. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Education

This job does not have an education qualification requirement.

Contacts

• Address Hill AFB 7437 6th Street Bldg 430, Rm 119 Hill AFB, UT 84056 US
• Name: Hill AFB DP2YHM
• Phone: (801) 586-4683
• Email: [email protected]