Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information. The primary purpose of this position is to serve as the Section Chief and second level supervisor, providing planning, directing, organizing, and exercising control over nonsupervisory employees assigned to the 502d Civil Engineer Squadron, Operations Engineering Flight, Operations Engineering Requirements Optimization Flight, Asset Engineering Section.

Duties

-Plans, organizes, and oversees the activities of the Asset Engineering Section, ensuring that the 502 Civil Engineer Squadron, Operations Engineering Flight, complies with legal and regulatory requirements and meets customer needs -Exercises supervisory personnel management responsibilities -Represents 502d Civil Engineer Squadron Asset Management Section with a variety of installation and functional area organizations -Directs the development and execution of the organization's short, mid and long range procurement plans and budgets in support of asset management plans

Requirements

• U.S. Citizenship Required
• Males must be registered for Selective Service, see www.sss.gov
• PCS expenses if authorized will be paid IAW JTR and Air Force Regulations ? Centrally Managed
• This position is subject to provisions of the DoD Priority Placement Program
• Disclosure of Political Appointments
• Work may occasionally require travel away from the normal duty station on military or commercial aircraft.
• The work may require the employee to drive a motor vehicle. An appropriate, valid drivers license will be required.
• May be required to serve as a member of the Emergency Response Force during exercises or in the event of an actual emergency.
• Professional registration or license as a Professional Engineer or Registered Architect in one of the 50 states or territories are desired but not required.
• The work requires the employee to access facilities and infrastructure which may require climbing on, crawling under or extensive walking at construction sites, hard hat areas or other base areas.
• This position has been designated by the Air Force as a Testing Designated Position under the Air Force Civilian Drug Demand Reduction Program. Employee must pass initial and periodic short notice drug testing.
• Illegal drug use by employees in sensitive positions presents a clear threat to the mission of the Air Force, national security, and public safety.
• Subject to a 1 year supervisory probationary period, unless previously met

Qualifications

In order to qualify, you must meet the specialized experience requirements described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, Professional and Scientific Positions. https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf BASIC REQUIREMENT: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR COMBINATION OF EXPERIENCE AND EDUCATION: B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test -Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.) Click here. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: SPECIALIZED EXPERIENCE: Applicants must have at least one (1) year of specialized experience at the next lower grade GS-12, or equivalent in other pay systems. Examples of specialized experience include serves as a professional engineer, supervising program development, asset engineering duties. Responsible for supervising the development of short, mid and long range procurement plans and strategic resource allocation supporting all facility maintenance, repair and construction on JBSA. This includes ensuring asset management plans align with Operations Engineering Flight and Civil Engineer strategic goals. The services provided support most of the activities for a large, complex, multi mission military installation and affect installation operations and objectives FEDERAL TIME-IN-GRADE (TIG) REQUIREMENT FOR GENERAL SCHEDULE (GS) POSITIONS: Merit promotion applicants must meet applicable time-in-grade requirements to be considered eligible. One year at the GS-12 level is required to meet the time-in-grade requirements for the GS-13 level. TIG applies if you are in a current GS position or held a GS position within the previous 52 weeks. NOTE: Applicants applying as VEOA candidates who are current GS civil service employees or are prior GS civil service employees within the past 52 weeks must also meet time-in-grade requirements. KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: 1. Knowledge of civil engineering concepts, principles, and practices and familiarity with other engineering disciplines and architecture. 2. Knowledge of safety and security regulations, practices, and procedures. 3. Ability to plan, organize, and direct the functions and staff of a small to medium sized organization. 4. Ability to analyze, interpret, and apply rules, regulations, and procedures in a variety of situations, recommend timely and economical solutions; coordinate with other engineering disciplines and architects; communicate effectively both orally and in writing; maintain good working relations. 5. Knowledge of automated data processing concepts to include all Microsoft Office applications. (Excel, Word, Access, Outlook, etc.) PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Education

IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience, transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation.

FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying.

Contacts

• Address JBSA Fort Sam Houston 2484 Stanley Rd, Bldg 2263, Ste 323 JBSA Fort Sam Houston, TX 78234 US
• Name: Total Force Service Center
• Phone: 1-800-525-0102
• Email: [email protected]