This position is located in the Office of the Director, Operational Test and Evaluation (DOT&E), Office of the Secretary of Defense (OSD). The office is established by statute and the Director (with status and duties comparable to an Assistant Secretary of Defense) prescribes policy for and reports directly to the Secretary of Defense and the Congress on all matters pertaining to Operational Test and Evaluation (OT&E) within the Department of Defense (DoD).

Duties

Incumbent typical work assignments may include the following: Serves as an expert for AW systems, tactics and procedures, sensors, weaponry, advanced electronic warfare (EW)/attack/electronic protection systems, and command, control, communications, computers, intelligence, surveillance, and reconnaissance (C4ISR), datalinks, mission planning and support systems. Performs studies and analyses for the Deputy Director on Air Warfare Systems, OSD (DOT&E). Participates in the formulation of system level critical operational issues, test objectives, and test methods of air and advanced electronic warfare, associated weaponry, and C4ISR systems for modeling and simulation and cyber requirements. Participates in Air Warfare Systems, weaponry and C4 ISR systems test and evaluation (T &E) test plan working groups for the integration of system and mission C4ISR systems into plans, assessments, and reports.

Requirements

• U.S. Citizenship is required
• Males born after 12-31-59 must be registered or exempt from Selective Service (see https://www.sss.gov/Home/Registration)
• May be required to successfully complete a probationary/trial period
• Must be determined suitable for federal employment
• Required to participate in the direct deposit program
• This position is subject to pre-employment and random drug testing
• This position is subject to the DoD Priority Placement Program
• The incumbent must be able to obtain and maintain a Top-Secret security clearance with Sensitive Compartmented Information (SCI). A Special Background Investigation (SBI) is required with favorable adjudication by a determining authority.
• This position may require occasional travel away from your normal duty station, approximately 25% of the time, for official business on military or commercial aircraft.
• This position requires incumbent to file an OGE Form 450, Confidential Financial Disclosure Report, upon appointment and annually thereafter.
• Relocation incentive may be authorized in accordance with regulatory requirements.
• Recruitment incentive may be authorized in accordance with regulatory requirements.
• Superior Qualifications Appointment may be authorized in accordance with regulatory requirements.
• Advanced Leave Accrual may be authorized in accordance with regulatory requirements.

Qualifications

For qualifications determinations, it is recommended that applicants include their months and hours worked per week for each employment listed on their resume. If a determination is not able to be made about the length of your creditable experience for qualification requirements, you will be removed from consideration. Read more about what should I include in my federal resume? at https://www.usajobs.gov/Help/faq/application/documents/resume/what-to-include/ Basic Requirements: 0801 Professional Engineering Basic Requirement:https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf 1301 General Physical Science Basic Requirement: A. Degree: physical science, engineering, or mathematics that included 24 semester hours in physical science and/or related engineering science such as mechanics, dynamics, properties of materials, and electronics. OR B. Combination of education and experience: education equivalent to one of the majors shown in A above that included at least 24 semester hours in physical science and/or related engineering science, plus appropriate experience or additional education. 1515 Operations Research Basic Requirement: Degree: in operations research; or at least 24 semester hours in a combination of operations research, mathematics, probability, statistics, mathematical logic, science, or subject-matter courses requiring substantial competence in college-level mathematics or statistics. At least 3 of the 24 semester hours must have been in calculus. You may qualify at the GS-15 level, if you fulfill the following qualification requirement: One year of specialized experience equivalent to the GS-14 grade level in the Federal service (experience may have been gained in the private sector) that demonstrates your ability in: Applying the principles, theories, and methodologies of a specialty area as it relates to the respective disciplines of mathematics, statistics, operations research, or actuarial science. Applying a broad comprehensive knowledge and applicable experience in physical sciences. Applying a mastery and extensive experience in all areas of test planning, execution, and evaluation of complex military systems ( e.g. TACAIR (Tactical Air Support), Mobility, and helicopter platforms, weaponry, EW (electronic warfare) and C4ISR). Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. ACTIVE DUTY SERVICE MEMBERS: The VOW Act Chapter 21 of Title 5, United States Code (U.S.C.), Section 2108a, requires Federal agencies treat active duty service member as veterans, disabled veterans, and preference eligible, when they submit, at the time they apply for a Federal job, a "certification" of active service in lieu of a DD-214, assuming the service member is otherwise eligible. A "certification" letter should be on letterhead of the appropriate military branch of the service and contain (1) the military service dates including the expected discharge or release date; and (2) the character of service. The service member's military service dates are necessary in order to determine whether he or she meets the definition of "veteran" under 5 U.S.C. 2108(1). The "certification" must reflect the service member is expected to be discharged or released from active duty service in the armed forces under honorable conditions not later than 120 days after the date of submission. The "certification" must be signed by, or by direction of, the adjutant, personnel officer, or commander of your unit or higher headquarters and must indicate when your terminal leave will begin (if applicable), your rank, dates of active duty service, the type of discharge and character of service (i.e. honorable). Further, under paragraph (h) of the rule, agencies are required to verify a qualifying separation from military service prior to appointment, through the DD-214 or other appropriate documentation. Your preference and/or appointment eligibility will be verified prior to appointment. Active duty members that fail to provide a valid "certification" of service with their initial application will be found "not eligible." Military members may be appointed before the effective date of their military retirement/separation if member is on terminal leave. Current or Former Political Appointees: Beginning January 1, 2010, agencies must seek prior approval from OPM before they can appoint a current or recent political appointee to a competitive or non-political excepted service position at any level under the provisions of title 5, United States Code. If you are currently or have been within the last 5 years, a political Schedule A, Schedule C, or Non-career SES employee in the executive branch, you MUST disclose that to the Human Resources Office. Submit a copy of your applicable SF-50, along with a statement that provides the following information regarding your most recent political appointment: Position title; Type of appointment (Schedule A, Schedule C, Non-career SES, or Presidential Appointee); Agency; and, Beginning and ending dates of appointment. ARE YOU QUALIFYING BASED ON EDUCATION or A COMBINATION OF EDUCATION AND EXPERIENCE? You must provide sufficient documentation of your education in your resume. You are strongly encouraged to provide a copy of transcripts or degrees in your application package. It is also acceptable to document your applicable course listing in your resume (course number, credits earned, etc.). Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education. Applicants can verify accreditation at the following website: http://www.ed.gov/admins/finaid/accred/index.html. All education claimed by applicants will be verified by the appointing agency. If selected, an official/sealed transcript will be required prior to appointment. All qualifications, education, and time-in-grade requirements must be met by the closing date of this announcement and clearly documented in your resume. Effective 5/25/2022, we will use the resume's employment dates and grade information in conjunction with the provided SF-50 at the lower grade level to give credit for time in grade requirements. We will confirm time in grade at the job offer stage if needed. At a minimum, you are still required to provide an SF-50 at the lower grade level for promotion eligibility consideration when applying for a promotion for GS-positions. It is still recommended you provide a Within-Grade Increase (WGI) SF-50 or multiple SF-50's at least one year apart at the lower grade level for time in grade confirmation with your application.

Education

Basic Requirements:
0801 Professional Engineering Basic Requirement:

A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of education and experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) 2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.
Note: An applicant who meets the basic requirements as specified in A or B above, except as noted under B.1., may qualify for positions in any branch of engineering unless selective factors indicate otherwise.

ARE YOU USING YOUR EDUCATION TO QUALIFY? You MUST provide transcripts to support your educational claims. Education must be accredited by an accrediting institution recognized by the U.S. Department of Education. Unless otherwise stated: (1) official or unofficial transcripts are acceptable, or (2) you may submit a list with all of your courses, grades, semester, year, and credit for the course. All materials must be submitted by the closing date of the announcement.

PASS/FAIL COURSES: If more than 10 percent of your undergraduate course work (credit hours) were taken on a pass/fail basis, your claim of superior academic achievement must be based upon class standing or membership in an honor society.

GRADUATE EDUCATION: One academic year of graduate education is considered to be the number of credits hours your graduate school has determined to represent one academic year of full-time study. Such study may have been performed on a full-time or part-time basis. If you cannot obtain your graduate school's definition of one year of graduate study, 18 semester hours (or 27 quarter hours) should be considered as satisfying the requirement for one year of full-time graduate study.

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://www2.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

Contacts

• Address Director of Operational Test and Evaluation Human Resources Directorate 4800 Mark Center Drive Alexandria, VA 22350 US
• Name: Washington HQ Services
• Phone: 000-000-0000
• Email: [email protected]