This position is being advertised concurrently with STIMP-25-12577211-CAWY-MF which is open to status candidates and other eligibles and applies Merit Promotion procedures. Status applicants who wish to be considered under both Merit Promotion and Competitive Examining procedures must apply directly to each announcement. This position is located with the Bureau of Indian Affairs, Northwest Region, Division of Transportation in Portland, Oregon or Vancouver, Washington.

Duties

Develop Regional policy for road maintenance, transportation safety, and traffic management systems. Provide technical assistance as requested on matters relating to maintenance and traffic management. Provide technical assistance in the development of pavement management systems and procedures for determining surfacing maintenance frequencies. Prepare the region road maintenance, traffic, pavement, equipment, and safety reports from information provided by the agencies. Develop reports as required to support management decisions. Provide technical assistance to tribal transportation projects from planning to construction close out. Responsible for oversight review of contracts and agreements. Facilitate the transfer of Federal funding to assigned tribes through funding agreements or contractors, meeting obligation deadlines. Responsible for transportation facility inventory updates. Ensure all road construction projects are constructed in compliance with regulations. Conduct final inspection and project closeout for assigned construction projects.

Requirements

• U.S. Citizenship Required
• Indian Preference applies
• You will be required to have federal payments made by Direct Deposit.
• You may be required to successfully complete a probationary/trial period.
• A background security investigation will be required for all new hires. Appointment will be subject to the applicant's successful completion of a background security investigation and favorable adjudication.
• If you are a male applicant born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency.
• Incidental Operator position. If you are required to operate a motor vehicle in order to properly carry out assigned duties, the 25 IAM 4 Motor Vehicle Safety Program Policy applies.
• NOTE: TRAVEL AND RELOCATION EXPENSES WILL BE AUTHORIZED IN ACCORDANCE WITH THE FEDERAL TRAVEL REGULATIONS.
• NOTE: THE PAY FLEXIBILITIES OF A RECRUITMENT BONUS, RELOCATION BONUS OR STUDENT LOAN REPAYMENT MAY BE AUTHORIZED, PENDING AVAILABILITY OF FUNDS AND MANAGEMENT APPROVAL.

Qualifications

EXPERIENCE AND EDUCATION REQUIREMENTS: (OPM Operating Manual, Qualification Standards for Professional and Scientific Positions, GS-0800, All Professional Engineering Positions, and/or BIA Excepted Standards, Civil Engineering Series, GS-0810). Basic Requirements for General Engineer, GS-0810: 1. Degree: professional engineering. To be acceptable, the curriculum must: (1) be in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR 2. Combination of education and experience--college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration--Current registration as a professional engineer by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test- Evidence of having successfully passed the Engineer-in-Training (EIT) examination, or the written test required for professional registration, which is administered by the Boards of Engineering Examiners in the various States, the District of Columbia, Guam, and Puerto Rico. Applicants who have passed the EIT examination and have completed all the requirements for either (a) a bachelor's degree in engineering technology (BET) from an accredited college of university that included 60 semester hours of courses in the physical, mathematical, and engineering sciences, or (b) a BET from a program accredited by the Accreditation Board for Engineering and Technology (ABET) may be rated eligible for certain engineering positions at GS-5. Eligibility is limited to positions that are within or closely related to the specialty field of the engineering technology program. Applicants for positions that involve highly technical research, development, or similar functions requiring an advanced level of competence in basic science must meet the basic requirements in paragraph A. Because of the diversity in kind and quality of BET programs, graduates of other BET programs are required to complete at least 1 year of additional education or highly technical work experience of such nature as to provide reasonable assurance of the possession of the knowledge, skills, and abilities required for professional engineering competence. The adequacy of this background must be demonstrated by passing the EIT examination. 3. Specified academic courses--Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum as described in paragraph A. 4. Related curriculum--Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. ADDITIONAL EXPERIENCE REQUIRED: In addition to meeting the basic entry level qualification requirements, applicants must have the following: SPECIALIZED EXPERIENCE GS-12: I meet the basic requirement, and I have at least one year of full-time specialized experience or the equivalent, comparable to at least the GS-11 in the Federal Service (obtained in either the public or private sector). Specialized experience must include the following with developing formats, general methods, and schedules to complete the mission and program goals with a minimum of assistance or specific supervision, exercise initiative, resourcefulness, and judgment in project accomplishment and to arrive at solutions for a wide variety of complex problems; implement, administer, and make recommendations on a variety of contracts; and manage and monitor projects. All qualification requirements must be met by the closing date of this announcement. Preference in filling vacancies is given to qualified Indian candidates in accordance with the Indian Preference Act of 1934 (title 25, USC Section 472). Additional selections may be made from this announcement if identical vacancies occur in the same location within 90 days from the closing date.

Education

If you are qualifying based on your education, you MUST provide transcripts or other documentation to support your educational claims. Unless otherwise stated: (1) official or unofficial transcripts are acceptable, or (2) you may submit a list with all of your courses, grades, semester, year, and credit for the course. All materials must be submitted by the closing date of the announcement.

If more than 10 percent of your undergraduate course work (credit hours) were taken on a pass/fail basis, your claim of superior academic achievement must be based upon class standing or membership in an honor society.

One academic year of graduate education is considered to be the number of credits hours your graduate school has determined to represent one academic year of full-time study. Such study may have been performed on a full-time or part-time basis. If you cannot obtain your graduate school's definition of one year of graduate study, 18 semester hours (or 27 quarter hours) should be considered as satisfying the requirement for one year of full-time graduate study.

If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must send a Certificate of Foreign Equivalency with your transcript in order to receive credit for that education which shows the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://www2.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

Contacts

• Address BIA Center for Recruitment Anadarko P.O. Box 1487 Anadarko, OK 73005 US
• Name: BIA Human Resources
• Phone: 405-247-1600
• Email: [email protected]