This position is located in the Northwestern Division - Programs Directorate - Columbia Basin Water Management Division. Serves as Chief of the NWD Columbia Basin Water Management Division (CBWM) Reservoir Control Center (Chief-RCC). Supervises the regulation of all Corps of Engineers reservoirs in the Northwestern Division, directs the regulation of the major reservoirs, and directs the regulation of certain non-Corps reservoirs for which the Corps has specific regulating responsibilities.

Duties

Serves as Chief of the NWD Columbia Basin Water Management Division (CBWM) Reservoir Control Center (Chief-RCC). Directs regulation of all major Corps of Engineer reservoirs on the Columbia and its main tributaries consistent with the current operating plan. Administers the NWD water quality program, against a background of regional controversy on impact of total dissolved gas (TDG) on fish aquatic life.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• Incumbent must be able to obtain and maintain a Professional Engineer or Hydrologist license/registration.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Department of Army Civilian Employees Applying on Time-Limited Assignments In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Supervisory Hydrologist 1315: A. Degree: Bachelor's degree (or higher degree) in physical or natural science, or engineering that included at least 30 semester hours in any combination of courses in hydrology, the physical sciences, geophysics, chemistry, engineering science, soils, mathematics, aquatic biology, atmospheric science, meteorology, geology, oceanography, or the management or conservation of water resources. The course work must have included at least 6 semester hours in calculus (including both differential and integral calculus), and at least 6 semester hours in physics. OR B. Combination of Education and Experience: Course work, as shown in A above, plus appropriate experience or additional education. Acceptable experience must have included performance of scientific functions related to the study of water resources, based on and requiring a professional knowledge of related sciences and the consistent application of basic scientific principles to the solution of theoretical and practical hydrologic problems. In the absence of water resource experience, professional scientific experience may be acceptable if such experience was preceded by appropriate education in hydrology or by professional hydrology experience. Basic Requirement for Supervisory Civil Engineer (Hydrologic) 0810: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: Specialized Experience: One year of specialized experience which includes 1) Applying flood regulations on a basin-wide basis to oversee the regulation of reservoirs; and 2) Applying knowledge of the hydrology of basins to include water resource development sufficient to administer a water quality program. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-12). Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted You will be evaluated on the basis of your level of competency in the following areas: Civil EngineeringHydraulic EngineeringHydrology Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-13).

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.

Contacts

• Address RH-W2SJAA US ARMY ENGINEER DIVISION-NORTHWESTERN DO NOT MAIL Portland, OR 97208 US
• Name: Army Applicant Help Desk