This is a public notice flyer to notify interested applicants of anticipated vacancies. Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered. There may or may not be actual vacancies filled from this flyer. Notice of Result letters will not be sent to applicants who respond to this flyer.

Duties

You will serve as the engineering manager concerning technical and general program management of design development, design documentation, test engineering and support for the TRIDENT II and advanced FBM Missile-borne instrumentation system. You will develop specific electrical, performance, and reliability requirements for all missile-borne instrumentation system including radiation-hardening requirements. You will ensure integration requirements with other missile systems including reentry, flight controls, and guidance are met. You will establish quality assurance and inspection requirements necessary to sure high system reliability. You will evaluate technical, cost, and schedule performance and initiates corrective action when necessary. You will analyze and evaluate ground and flight test results and initiates appropriate action to assure performance and reliability requirements are satisfied for developing and deployed systems. You will lead and participate in working group meetings of contractors, consultants, supervisory to analyze and formulate programs and methods design, development, and operational problems. You will coordinate new technology studies, including appropriate budgetary, planning, programming, and ultimate implementation.

Requirements

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
• Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.

Qualifications

In addition to the basic education requirement, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-13 grade level or NH-03 pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: as a professional engineer/physicist collaborating in multi-organization efforts, providing the development, design, evaluation, budget, analyzing problems and determining solution in the support of missile systems and subsystems. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series For the 08XX series: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf For the 1310 series: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/1300/physics-series-1310/ Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Applicants must possess:

08XX- Professional Engineering Series:

Professional Engineering Series (08XX) - Degree: A professional engineering degree from an ABET-accredited college or university; OR a degree with curriculum in differential and integral calculus, with additional courses in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics; or electronics;

OR

Professional Engineering Series (08XX) - Substitution of Education/Experience: A combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering; and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: (a) professional registration, (b) evidence of successfully passing the Engineer-in-Training (EIT) examination; (c) successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified above; or (d) successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering provided that it included at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. (Note to Applicants: Please see the Qualifications & Education sections of this announcement for a link to the Office of Personnel Management (OPM) Individual Occupational Requirements. OPM guidance indicates that there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience. This training plan or experience must be well documented and provided at time of application.)

OR

1310 Physics Series:

A degree in physics; or related degree that included at least 24 semester hours in physics. OR a combination of education and experience -- courses equivalent to a major in physics totaling at least 24 semester hours, plus appropriate experience or additional education.

A transcript must be submitted with your application if qualifying using education.

Contacts

• Address STRATEGIC SYSTEMS PROGRAMS 1250 10th Street SE Washington Navy Yard, DC 20374 US
• Name: Tiffany Camire
• Phone: 202-451-3647
• Email: [email protected]