About the Position: This position is in the Defense Civilian Intelligence Personnel System (DCIPS). Employees occupying DCIPS positions are in the Excepted Service and must adhere to U.S. Code, Title 10, as well as Department of Defense Instruction 1400.25. This position is located at the ST-IC-W6A6AA US ARMY INTELLIGENCE AND SECURITY CMD US Army Intelligence and Security CMD, Security Resiliency Activity, ACOFS G-2.

Duties

Serve as a General Engineer in the Army Research and Technology Protection Center (ARTPC), Intelligence and Security Command (INSCOM). Serve as a general engineer and technical expert involved in design, development, acquisition, use, validation, of programmatic requirements for Programs of Record and S and T communities. Develop theoretical methods, techniques and analytical processes to measure, calculate and estimate the characteristics and capabilities of foreign threat systems.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• Two year trial/probationary period may be required.
• In accordance with Change 3 to AR 600-85, Alcohol and Drug Abuse Prevention and Control Program, individual must successfully pass a urinalysis screening for illegal drug use prior to appointment and periodically thereafter.
• Must be able to obtain and maintain a TOP SECRET Security Clearance based on a single scopebackground investigation (SSBI) with eligibility for sensitive compartmented information (SCI).
• All INSCOM employees may be subject to extended TDY or worldwide deployments during crisis situations to perform mission essential functions as determined by management.
• Temporary Duty (TDY) may be less or more than 10% of the time.
• May be required to take a counterintelligence scope polygraph examination, if access to a special access program is required

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. 10-Point Other Veterans’ Rating30 Percent or More Disabled Veterans5-Point Veterans' PreferenceCurrent Army Defense Civilian Intelligence Personnel System (DCIPS) EmployeeCurrent Department of Army Civilian EmployeesCurrent Department of Defense (DOD) Civilian Employee (non-Army)Current DoD Defense Civilian Intelligence Personnel System (DCIPS) Employee (non-Army)Defense Civilian Intelligence Personnel System (DCIPS) Interchange AgreementDisabled Veteran w/ a Service-Connected Disability, More than 10%, Less than 30%Non-Department of Defense (DoD) TransferPrior Federal Service EmployeePriority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician EligiblePriority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability RetirementPriority Placement Program, DoD Retained Grade Preference EligibleUnited States Citizen Applying to a DCIPS Position Army DCIPS positions apply Veteran's Preference to preference eligible candidates as defined by Section 2108 of Title 5 U.S.C., in accordance with the procedures provided in DoD Instruction 1400.25, Volume 2005, DCIPS Employment and Placement. In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Supervisory General Engineer: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: Experience required: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience Specialized Experience Statement (HR/SME) To qualify based on your experience, your resume must describe at least one year of experience which prepared you to do the work in this job. Specialized experience is defined as experience with multi discipline engineering expertise in the evaluation of technical design capabilities and conduct comparative assessment of peer and near peer capabilities. This definition of specialized experience is typical of work performed at the next lower grade/level in the Federal service (GG/GS-12). You will be evaluated on the basis of your level of competency in the following areas: CommunicationsGeneral EngineeringProject Management

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

Contacts

• Address ST-IC-W6A6AA US ARMY INTELLIGENCE AND SECURITY CMD DO NOT MAIL Fort Huachuca, AZ 85613 US
• Name: Army Applicant Help Desk
• Email: [email protected]