THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a ELECTRONIC INTEGRATED SYSTEMS MECHANIC (TITLE 32), Position Description Number NGD2240P01/NGD2325000 and is part of the TN 164th AW, Air National Guard. This vacancy is covered by Association of Civilian Technicians (ACT), Chapter 115 (Pyramid on the River Chapter).

Duties

As an ELECTRONIC INTEGRATED SYSTEMS MECHANIC, WG-2610-12/13 (TITLE 32) you will perform scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems. Review and analyze maintenance data; determines if criteria are sufficient to provide adequate test, troubleshooting and repair procedures; devises and recommends tests, procedural changes, or data corrections. Troubleshoot operational malfunctions and analyzes system performance utilizing aircrew debrief data, Technical Orders, schematic and wiring diagrams, engineering drawings, data analysis, common and system-specific test equipment and built in system tests. Recommend methods to improve equipment performance, technical data, and maintenance procedures by reporting hardware and software malfunctions, initiates material deficiency reports both on equipment and in technical data and assists in design changes as necessary. May upload/download chaff/flare dispensers. May be required to perform additional duties such as structural firefighting, aircraft fire/crash/rescue duty, serve as a security guard, remove snow, load and handle munitions, launch/recover and service aircraft, operate heavy equipment, maintain facilities and equipment, or serve as a member of a team to cope with natural disasters or civil emergencies. Perform other duties as assigned.

Requirements

• NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
• This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
• Selectee will be required to wear the military uniform.
• Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
• Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
• Males born after 31 December 1959 must be registered for Selective Service.
• Federal employment suitability as determined by a background investigation.
• May be required to successfully complete a probationary period.
• Participation in direct deposit is mandatory.
• Must be able to obtain and maintain the appropriate security clearance of the position.
• Position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
• Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
• Irregular and/or overtime (compensatory) hours may be required to support operational requirements or contingencies or may be required to work hours outside of the normal duty day.
• The duties and responsibilities of your job may significantly impact the environment.
• You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.
• Preplacement Medical Requirements: Selectee will be required to undergo medical testing, at the expense of the government, prior to beginning employment. Medical tests are used to determine fitness and eligibility for employment.
• Acceptance of a Federal position may terminate Tricare Reserve Select eligibility.

Qualifications

Military Grades: E-3 through E-6 AFSC; 2A9X4 GENERAL EXPERIENCE: Skilled in collecting and analyzing data effectively, efficiently, and accurately. Ability to communicate clearly and effectively. Skilled in duties such as, install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes Ability to format and write English in reports and presentation formats Skilled in presenting formal training presentations and briefings Skilled in applying procedures and directives by reading and interpreting material Skilled in training, mentoring, leading, and problem-solving. SPECIALIZED EXPERIENCE: WG 2610-12 Must have 18 months Experiences involved installing, modifying, overhauling, maintaining, troubleshooting, repairing, aligning, calibrating, and rebuilding multi-system avionics complexes consisting of multiple completely integrated electronic avionics systems where the complex accomplishes a number of major functions. Skilled in performing on-or-off equipment maintenance on one or more complete electronic integrated systems associated with the assigned aircraft and/or maintenance on automatic flight control systems, instrument systems, inertial or radar navigation systems. Experiences included performing scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems. Skilled in conducting operational checks, inspections, tests, trouble shooting, removal and replacement of line replaceable units. Capable of isolating unusual malfunctions by using technical orders, schematics, wiring diagrams, tools, and test equipment to include automatic test equipment and flight line test systems. Experiences involved solving complex problems by analyzing installation, circuitry, and operating characteristics of the systems. Skilled in adjusting and aligning system sensors, transmitters, amplifiers, power supplies, display devices, controls, transponders, actuators, servos, computers and other related components. Capable of installing serviceable components into aircraft and performed total systems alignment and harmonization in accordance with existing technical orders and directives. Skilled in technical order FWS compliance factors, modification of components/systems, and completed thorough system checks for proper operations. Experienced in maintaining, modifying, calibrating and inspecting a wide variety of user tests, measurements, and diagnostic equipment. Skilled craft for installing, modifying, overhauling, maintaining, troubleshooting, repairing, rebuilding, aligning, and calibrating complete electronic avionics multi-systems controls. Must have a working knowledge of complex aircraft avionics; and/or, electronic circuit maintenance systems such as, the electronics package used in an automated aircraft. Skilled in operating integrated flight and integrated counter-measures system, electronic multiplex communications bus, inertial navigation system, multi-function displays, head up display, data transfer equipment, global positioning system, situation awareness datalink, data modem, flight control system, pitot-static system and related instrumentation. Must have experiences in working with the flight director instrumentation, central air data computer, engine, hydraulic and fuel quantity indicating systems, voice message warning, very high frequency ultra-high frequency, satellite communications data, intercom, secure voice communications, and identification friend or foe tactical air navigation system. Experiences included work that evaluated operational characteristics of the integrated systems by observing and analyzing waveforms, voltage, current, power indications, computer registers and printouts. Skilled in analyzing the malfunctions encountered through fault codes, determines repair sequence process and performs the repairs. Experienced in the review and analyzation of maintenance data. Knowledgeable in determining if criteria are sufficient to provide adequate test, troubleshooting and repair procedures. Experienced in devising and recommending tests, procedural changes, or data corrections. Capable to align, adjust, and perform final calibrations on integrated systems to determine successful repairs. Skilled in analyzing equipment failure and malfunctions; and, suggested changes to improve operations. Experiences included monitoring the operations of complex, inter-related systems, and analyzed operating trends, proposed preventative maintenance down time that assured continued operating capability, and recommended components for overhaul or engineering evaluation for disposal. Skilled in applying technical data and equipment specifications that determined the impacts of equipment modifications or substitutions on integrated multi-system operations and various maintenance alignment procedures. WG-2610-13 Must have 18 months experiences working as an Electronic Integrated Systems Mechanic, WG-2610-12, and must possess the craftsman. level of knowledge and skills to install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes consisting of multiple completely integrated electronic avionics systems where the complex accomplishes a number of major functions. Experiences included the ability and skills to perform on-or off-equipment maintenance on one or more complete electronic integrated systems associated with the assigned aircraft and/or maintenance on systems such as, automatic flight control systems, instrument systems, inertial and radar navigation systems. Experienced in performing scheduled and unscheduled maintenance on one or more multi complex electronic integrated systems. Experiences included completing operational checks, inspections, tests, trouble shooting, removal and replacement of line-replaceable units which are linked with integrated systems and line-replaceable-units which are independent or associated with nonintegrated systems. Must have skilled capabilities of isolating unusual malfunctions using technical orders, schematics, wiring diagrams, tools, and test equipment including automatic test equipment and flight line test systems. Skilled in solving complex problems by analyzing installation, circuitry, and operating characteristics of the systems. Experiences involved adjusting and aligning system sensors, transmitters, amplifiers, power supplies, display devices, controls, transponders, actuators, servos, computers and other related components. Skilled in installation of serviceable components into aircraft and performed total systems alignment and harmonization in accordance with existing technical orders and directives. Experienced and skilled in completing technical order compliances, completing component and system modifications, and performing thorough system checks for correct operations. Skilled in maintaining, modifying, calibrating, and inspecting a wide variety of user test, measurement, and diagnostic equipment. Experienced in performing installations, modifications, overhauling, maintaining, troubleshooting, repairing, rebuilding, aligning, and calibrating complete electronic avionics multi-system controls. Working knowledge of complex aircraft avionics or electronic circuit maintenance systems such as, the electronics package in highly automated aircraft where the integrated flight and integrated countermeasures system, electronic multiplex communications bus, inertial navigation system, multi-function displays, head-up display, data transfer equipment, global positioning system, situation awareness data-link, data modem, flight control system, pivot-static system and related instrumentation, flight director instrumentation, central air data computer, engine, hydraulic and fuel quantity indicating systems, voice message warning, various modes of data, intercom, secure voice communications, identification friend or foe, and tactical air navigation system.

Education

Education Requirement: None

Contacts

• Address TN 164th AW 4593 Swinnea Road Memphis, TN 38118 US
• Name: THEODORE REGAN
• Phone: (615) 313-0606
• Email: [email protected]