THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a ELECTRONIC INTEGRATED SYSTEMS MECHANIC (TITLE 32), Position Description Number NGD2440P01 and is part of the TN 164th AW, Air National Guard. This vacancy is covered by Association of Civilian Technicians (ACT), Chapter 115 (Pyramid on the River Chapter).

Duties

As a ELECTRONIC INTEGRATED SYSTEMS MECHANIC, WG-2610-13, you will perform scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems. Review and analyze maintenance data; determines if criteria are sufficient to provide adequate test, troubleshooting and repair procedures; devises and recommends tests, procedural changes, or data corrections. Troubleshoot operational malfunctions and analyzes system performance utilizing aircrew debrief data, Technical Orders, schematic and wiring diagrams, engineering drawings, data analysis, common and system-specific test equipment and built in system tests. Recommend methods to improve equipment performance, technical data, and maintenance procedures by reporting hardware and software malfunctions, initiates material deficiency reports both on equipment and in technical data and assists in design changes as necessary. May upload and download chaff/flare dispensers. May be required to perform additional duties such as structural firefighting, aircraft fire/crash/rescue duty, serve as a security guard, remove snow, load and handle munitions, launch/recover and service aircraft, operate heavy equipment, maintain facilities and equipment, or serve as a member of a team to cope with natural disasters or civil emergencies. Perform other duties as assigned.

Requirements

• NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
• This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
• Selectee will be required to wear the military uniform.
• Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
• Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
• Males born after 31 December 1959 must be registered for Selective Service.
• Federal employment suitability as determined by a background investigation.
• May be required to successfully complete a probationary period.
• Participation in direct deposit is mandatory.
• To initially qualify and prior to appointment, an applicant’s military medical record must indicate a completed and current medical physical, medical profile, a cleared drug test; and, normal color vision as defined in AFI 48-123.
• To initially qualify and as a condition of continued dual status technician employment, must have the capability to lift, carry, push, or otherwise handle items weighing up to 70 pounds.
• To initially qualify and as a condition of continued dual status technician employment, must have the physical capability to stand, climb, walk, bend, crouch, reach, and stoop over extended periods of time.
• To initially qualify and as a condition of continued dual status technician employment, must possess a valid state driver’s license to operate government motor vehicles, for the state in which he or she lives or is principally employed.
• As a condition of continued dual status technician employment, the employee must complete the hazmat certification within six months of employment and complete hazmat recertification every two years.
• As a condition of continued dual status technician employment, the employee must maintain the position’s mandatory AFSC skill level and continue on-the-job proficiency requirements.
• As a condition of continued dual status technician employment, the employee must maintain local network access IAW AFMANs 33-152, User Responsibilities and Guidance for Information Systems and 33-282, Computer Security.
• Preplacement Medical Requirements: Selectee will be required to undergo medical testing, at the expense of the government, prior to beginning employment. Medical tests are used to determine fitness and eligibility for employment.
• Acceptance of a Federal position may terminate Tricare Reserve Select eligibility.
• For positions requiring a security clearance (Secret or Top Secret) the applicant must possess or be able to obtain a clearance within one year of appointment.

Qualifications

Military Grades: E-3 to E-6 Compatible Military Assignments: 2A071, 2A271, 2A272, 2A273, 2A374, 2A375, 2A871, 2A872, 2A971, 2A972 or 2A973 GENERAL EXPERIENCE: An applicant must have a validated understanding of the basic principles and concepts of the occupational series and grade. Skilled in collecting and analyzing data effectively, efficiently, and accurately Ability to communicate clearly and effectively Skilled in duties such as, install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes Ability to format and write English in reports and presentation formats Skilled in presenting formal training presentations and briefings Skilled in applying procedures and directives by reading and interpreting material Skilled in training, mentoring, leading, and problem-solving SPECIALIZED EXPERIENCE: The applicant must have at least 12 months of specialized experiences working as an Electronic Integrated Systems Mechanic, WG-2610-12, and must possess the craftsman level of knowledge and skills to install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes consisting of multiple completely integrated electronic avionics systems where the complex accomplishes a number of major functions. Experiences included the ability and skills to perform on-or off-equipment maintenance on one or more complete electronic integrated systems associated with the assigned aircraft and/or maintenance on systems such as, automatic flight control systems, instrument systems, inertial and radar navigation systems. Experienced in performing scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems. Experiences included completing operational checks, inspections, tests, trouble shooting, removal and replacement of line-replaceable-units which are linked with integrated systems and line-replaceable-units which are independent or associated with nonintegrated systems. Must have skilled capabilities of isolating unusual malfunctions using technical orders, schematics, wiring diagrams, tools, and test equipment including automatic test equipment and flight line test systems. Skilled in solving complex problems by analyzing installation, circuitry, and operating characteristics of the systems. Experiences involved adjusting and aligning system sensors, transmitters, amplifiers, power supplies, display devices, controls, transponders, actuators, servos, computers and other related components. Skilled in the installation of serviceable components into aircraft and performed total systems alignment and harmonization in accordance with existing technical orders and directives. Experienced and skilled in completing technical order compliances, completing component and system modifications, and performing thorough system checks for correct operations. Skilled in maintaining, modifying, calibrating, and inspecting a wide variety of user test, measurement, and diagnostic equipment. Experienced in performing installations, modifications, overhauling, maintaining, troubleshooting, repairing, rebuilding, aligning, and calibrating complete electronic avionics multi-system controls. Must have a thorough working knowledge of complex aircraft avionics or electronic circuit maintenance systems such as, the electronics package in highly automated aircraft where the integrated flight and integrated countermeasures system, electronic multiplex communications bus, inertial navigation system, multi-function displays, head-up display, data transfer equipment, global positioning system, situation awareness data-link, data modem, flight control system, pivot-static system and related instrumentation, flight director instrumentation, central air data computer, engine, hydraulic and fuel quantity indicating systems, voice message warning, various modes of data, intercom, secure voice communications, identification friend or foe, and tactical air navigation system. Experienced in evaluating operational characteristics of the integrated systems by observing and analyzing waveforms, voltage, current, power indications, computer registers and printouts. Skilled in analyzing the malfunctions encountered through fault codes, determining repair sequence process and performing required repairs. Experiences involved reviewing and analyzing maintenance data; determines if criteria are sufficient to provide adequate test, troubleshooting and repair procedures; devises and recommends tests, procedural changes, or data corrections. Skilled in performing alignments, adjustments, and conducting final calibrations on integrated systems to determine successful repairs. Experienced in monitoring the operations of complex, inter-related systems, analyzing operating trends, and proposing preventative maintenance down time. Skilled in the applications of technical data and equipment specifications that determine the impact equipment modifications or substitutions on integrated multi-system operations and various maintenance alignment procedures. Competent in using algebraic and trigonometric functions to adapt standard formulas to the specific requirements of the integrated system. Experiences involved the installation, operation, and repair work on prototypes or experimental electronic systems such as, inertial navigation or automatic flight control. Competent in advising aerospace engineering personnel on the operation and maintenance effects of proposed time compliance technical orders' modifications on new or existing equipment.

Education

Education Requirement for WG-13 ANG Dual Status Technician FWS 2610 positions:

1. Completion of an Air Force Seven Skill Level Technical Training School and awarded a compatible Seven Skill Level AFSC, along with the

2. Successful completion of at least one military professional education course program.

3. High School Diploma: Completion of high school courses in physics, algebra, trigonometry, and computer principles is desirable. Higher academic college courses and degrees that are aligned within the FWS Series 2610 type of work tasks are also desirable.

The applicant's educational-degree study program or specific academic courses may substitute for some specialized experience. An applicant must demonstrate the identified specialized experience competencies (skills, knowledge, abilities and behaviors) to qualify for a FWS 2610 position as identified by its applicable grade.

To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.

*** DISQUALIFICATION NOTICATION: Applications that do not have the REQUIRED education documentation will be rated as NON-QUALIFYING due to the following: FAILURE TO SUBMIT A COPY OF EDUCATION

Contacts

• Address TN 164th AW 4593 Swinnea Road Memphis, TN 38118 US
• Name: Melody Stephens
• Phone: 615-313-0654
• Email: [email protected]