This position is being recruited under 10 USC 1599f into the Cyber Excepted Service and does NOT convey eligibility to be converted to the Competitive Service. It has been identified as a position necessary to carry out and support the mission of the US Cyber Command. It is in the Professional Work Category at the Senior Work Level within the CES Occupational Structure. It is located in the Defense Information Service Agency (DISA)/Joint Interoperability Test Command (JITC). .

Duties

Serves as a radio frequency engineer conducting technical reviews, requirements analysis, and use of methodologies to support test and evaluation of RF systems for various waveforms (CDL, HF, UHF, SINGARS, SATURN, etc.) Designs, plans, coordinates, and executes radio frequency system standards conformity. Develops operational and interoperability test and evaluations. Document test and evaluation results, conduct analysis, and draft reports. Solve engineering/scientific problems relating to tests and evaluations to determine which tests are to be performed. Test various methodology, and test whether facilities and instrumentation are adequate to achieve accurate test data. Operates and automates radio frequency test equipment such as signal analyzer, signal generator, spectrum analyzer, oscilloscope, channel emulator, and bit error rate tester.

Requirements

• Must be a U.S. Citizen.
• This national security position, which may require access to classified information, requires a favorable suitability review and security clearance as a condition of employment. Failure to maintain security eligibility may result in termination.
• Males born after 12-31-59 must be registered or exempt from Selective Service.
• This position is covered under DoD Manual 8140 which will be subject to future Cyber Workforce requirements as defined by the Manual.
• Individuals tentatively selected for drug testing designated positions at the Defense Information Systems Agency will be required to submit to urinalysis for illegal drugs prior to appointment or placement.

Qualifications

In order to qualify for this position, you must meet the requirements described below. Basic Requirements: Professional Engineering Positions 0854/0855: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.) Computer Science Series 1550: Bachelor's degree in computer science or bachelor's degree with 30 semester hours in a combination of mathematics, statistics, and computer science. At least 15 of the 30 semester hours must have included any combination of statistics and mathematics that included differential and integral calculus. All academic degrees and course work must be from accredited or pre-accredited institutions. AND Qualifying Experience: To qualify at the GG-13, the body of your resume must describe at least one year of experience that demonstrates the competencies necessary for immediate success in the position. Experience refers to any paid or unpaid experience, including volunteer work and Military service, that would be considered equivalent to work normally performed at the next lower grade level in the federal service. For this position, qualifying experience is defined as: A radio frequency technical lead or engineering lead. Experience conducting technical reviews, requirements analysis, and use of strategies and methodologies which will be used to support test and evaluation (T&E). Your resume MUST include the following information for each job listed: Job title; duties (be as detailed as possible, include qualifying experience); month & year start/end dates (e.g. June 2007 to April 2008); and full- time or part-time status (include hours worked per week). Read more about what should I include in my federal resume here. Candidates must describe how they meet the qualifying experience and/or selective placement factor(s) within the body of their resume. All qualifications must be met within 30 days after the closing date of this announcement.

Education

There is no substitution of education for qualifying experience at the GG-13 grade level.

To be creditable, education must have been obtained in an accredited college or university. You must report only attendance and/or degrees from schools accredited by accrediting institutions that are recognized by the U.S. Department of Education

Foreign Education: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show that the education credentials have been evaluated by the National Association of Credential Evaluation Services at the time of application. National Association of Credential Evaluation Services .

Contacts

• Address DISA - EII/JT INTEROPERABILITY TEST CMD 6910 Cooper Road Fort Meade, MD 20755-7088 US
• Name: HR Customer Care Center
• Phone: (317) 212-0454
• Email: [email protected]