As Section Chief, is responsible for the full scope of managing the resources allocated to Surveys section which includes planning for adequate personnel, planning for the effective use of personnel and equipment, managing the use of architect engineer contractors, determination of methods for accomplishment of work, coordination with other divisions and private surveyors, and renders decisions on all phases involving the application or determination of surveying concepts and procedures.

Duties

Serves as District consultant and staff advisor on all matters pertaining to the development of topographic and hydrographic survey and mapping requirements Manages professional cartographers and engineering technicians, and survey parties involved with complex data systems. Ensures section employees are provided training in the use of equipment and software. Serves as the Program Manager/Coordinator, responsible for the overall management, marketing, coordination, and execution of imagery and mapping relate projects. Conducts periodic inspections (other than construction inspection) of work authorized by Congress such as navigable channels, coastal and harbor structures, and waterway protection projects. Provides technical assistance to Project Managers in the development of an annual plan of work, schedules deadlines for accomplishing the navigation program. Manages the District's Navigation Land Use Program, providing programmatic oversight for Operations Division.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• TDY up to 15% may be required.
• Must possess and maintain a valid state driver’s license at time of appointment.
• Position requires a pre-employment and periodic physical examination and/or evaluation under the District Medical Surveillance Program, and requires the use of personal protective clothing or equipment.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. 30 Percent or More Disabled VeteransCurrent Department of Army Civilian EmployeesCurrent Department of Defense (DOD) Civilian Employee (non-Army)Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel WorkforceInteragency Career Transition Assistance PlanLand Management Workforce Flexibility ActMilitary Spouses, under Executive Order (E.O.) 13473Non-Department of Defense (DoD) TransferPeople with Disabilities, Schedule APriority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician EligiblePriority Placement Program, DoD Military Spouse Preference (MSP) EligiblePriority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability RetirementPriority Placement Program, DoD Retained Grade Preference EligibleReinstatementVeterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Supervisory Land Surveyor 1373 series: A. Degree: Bachelor's degree (or higher degree) in land surveying; or civil engineering with a surveying option/emphasis. The civil engineering major must have included at least 6 semester hours of surveying, 3 semester hours of land law, and 21 additional semester hours in any combination of the following: surveying, photogrammetry, geodetic surveying, geodesy, route surveying, remote sensing, cartography, survey astronomy, land information systems, computer-aided mapping, aerial photo interpretation, and survey analysis and adjustments. OR B. Combination of Education and Experience: Courses equivalent to a major in land surveying or civil engineering, as described in paragraph A, plus appropriate experience or additional education. OR C. Registration: The basic requirements for this series may be fully satisfied by a current registration as a land surveyor in a State, territory, or the District of Columbia obtained by written examination. Such registration must have been obtained under conditions outlined in the National Council of Engineering Examiners (NCEE) Unified Model Law for Registration of Surveyors. Applicants wishing to be considered under this provision must show evidence of registration based on successful completion of the written examinations. Registrations granted prior to adoption of a registration law with qualification requirements equivalent to the NCEE Model Law by the State, territory, or District of Columbia are not acceptable under this option. To be considered equivalent to the NCEE Model law, registration laws must include the four options listed within the NCEE Unified Model Law in the section specifying "General Requirements for Registration" as a Professional Land Surveyor. Basic Requirement for Supervisory Physical Scientist 1301 Series: A. Degree: Bachelor's degree (or higher degree) in physical science, engineering, or mathematics that included 24 semester hours in physical science and/or related engineering science such as mechanics, dynamics, properties of materials, and electronics. OR B. Combination of Education and Experience: Courses equivalent to one of the majors, as shown in A above, that included at least 24 semester hours in physical science and/or related engineering science, plus appropriate experience or additional education. Basic Requirement for Supervisory Cartographer 1370 Series: A. Degree: Bachelor's degree (or higher degree) in cartography, or a degree with a major that included or was supplemented by at least 30 semester hours in cartography and/or directly related science, and related mathematics. Such course work includes, but is not limited to, cartography, astronomy, geodesy, photogrammetry, physical and geological oceanography, computer science, land surveying, geophysics, physical geography, and remote sensing. The 30 semester hours must have included at least 6, but no more than 15, semester hours of college level, non-business mathematics or statistics (i.e., college level algebra, trigonometry, calculus, or scientific mathematics or statistics requiring equivalent college-level courses as prerequisites). OR B. Combination of Education and Experience: Courses equivalent to a major in cartography, or a major that included or was supplemented by at least 30 semester hours in cartography, and/or directly related science, and related mathematics, as shown in A above, plus appropriate experience or additional education. Basic Education Requirements continued below in Education section. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: Specialized Experience: One year of specialized experience which includes providing professional advice, guidance, review and overall supervision of all technical support for water resource related projects for land surveying and hydrographic surveying activities associated with the engineering planning and analysis activities. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-12). Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted. You will be evaluated on the basis of your level of competency in the following areas: Ability to work with othersAdministration and ManagementCustomer Service (Clerical/Technical)Instructional Program AdministrationSurveyingSystems Engineering Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-12).

Education

Basic Requirement for Supervisory Civil Engineer 0810 Series:

A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.

3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.

4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.

Contacts

• Address RH-W2SJ01 USARMY ENGINEER DISTRICT-PORTLAND DO NOT MAIL Portland, OR 97208 US
• Name: Army Applicant Help Desk