This is a public notice flyer to notify interested applicants of anticipated vacancies. Applications will not be accepted through this flyer. Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered. There may or may not be actual vacancies filled from this flyer. Notice of Result letters will not be sent to applicants who respond to this flyer.

Duties

You will perform site visits to evaluate contractor compliance with applicable contract clauses and evaluate the accuracy of progress reports submitted. You will perform constructability review of contract documents (e.g., plans and specifications) before contract award. You will prepare documents (e.g., cost estimates, sketches, and clarifying drawings) used during change order negotiations. You will review contractor design and construction schedules to verify compliance with contract requirements.

Requirements

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
• You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment.
• You will be required to obtain and maintain a current valid United States driver’s license
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.

Qualifications

In addition to the Basic Requirements for this position, Your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-11 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: 1) Participating and/or coordinating both pre-award and post-award meetings such as Technical Evaluation Teams (TETs), constructability reviews, preconstruction conferences, partnering meetings, and final inspections; 2) Identifying and recommending technical solutions to problems encountered during the construction of facilities; 3) Monitoring contractor construction schedules to ensure construction projects do not exceed time constraints; 4) Reviewing accident prevention plans for compliance with contract health and safety requirements; and 5) Reviewing contract drawings and specifications with respect to constructability and compatibility with field conditions. NOTE: Experience must be fully documented in your resume in order to be considered qualified. Additional qualification information can be found from the following Office of Personnel Management website: http://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/all-professional-engineering-positions-0800/ OR http://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/architecture-series-0808/ AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Basic Education Requirements: Architect -0808 Series Degree in architecture; or related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems; OR a combination of education and experience: college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following: Related Curriculum: Degree in architectural engineering may be accepted as satisfying in full the basic requirements, provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in paragraph A. The curriculum for a degree in either architecture or architectural engineering covers function, esthetics, site, structure, economics, mechanical-electrical, and other engineering problems related to the design and construction of buildings primarily (but not exclusively) intended to house human activities. The courses required for a degree in architecture generally place emphasis upon planning, esthetics, and materials and methods of construction, while the courses for an architectural engineering degree place equal or greater weight on the technical engineering aspects such as structural systems, mechanical systems, and the properties of materials. Because of this difference in emphasis, persons with degrees in architecture may have a preference for work assignments that offer greater opportunities for them to express their artistic and creative abilities. As a result, they may be more concerned with planning and design aspects of architecture, and persons with degrees in architectural engineering may be more engaged in aspects emphasizing technical engineering considerations. An applicant lacking a degree in architecture must have had 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of college courses, 5 years of such experience is required. This experience must have demonstrated that the applicant has acquired a thorough knowledge of the fundamental principles and theories of professional architecture.

Education

Basic Education Requirements: General Engineer -0801 Series

A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of education and experience -college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure-Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test-Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional1 For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org.2 The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.2registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.

3. Specified academic courses-Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.

4. Related Curriculum-Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

Contacts

• Address NAV FACILITIES ENGINEERING COMMAND SE Naval Air Station Bldg 903 PO Box 30 Jacksonville, FL 32212-0030 US
• Name: Angela Wytch
• Phone: (904) 752-1291
• Email: [email protected]