THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a ELECTRONIC INTEGRATED SYSTEMS MECHANIC (TITLE 32), Position Description Number NGD2327000 and is part of the TN 134th ARW, Air National Guard. This vacancy is covered by Association of Civilian Technicians (ACT), Chapter 114 (Smoky Mountain Chapter)

Duties

As a ELECTRONIC INTEGRATED SYSTEMS MECHANIC, WG-2610-13, you will perform duties and responsibilities. Plan and lay out work to be accomplished in the shop, which is then completed by the incumbent and lower graded mechanic(s). Perform other duties as assigned.

Requirements

• NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
• This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
• Selectee will be required to wear the military uniform.
• Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
• Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
• Males born after 31 December 1959 must be registered for Selective Service.
• Federal employment suitability as determined by a background investigation.
• May be required to successfully complete a probationary period.
• Participation in direct deposit is mandatory.
• To initially qualify and prior to appointment, an applicant’s military medical record must indicate a completed and current medical physical, medical profile, a cleared drug test; and, normal color vision as defined in AFI 48-123.
• To initially qualify and as a condition of continued dual status technician employment, must have the capability to lift, carry, push, or otherwise handle items weighing up to 70 pounds.
• To initially qualify and as a condition of continued dual status technician employment, must have the physical capability to stand, climb, walk, bend, crouch, reach, and stoop over extended periods of time.
• To initially qualify and as a condition of continued dual status technician employment, must possess a valid state driver’s license to operate government motor vehicles, for the state in which he or she lives or is principally employed.
• As a condition of continued dual status technician employment, the employee must complete the hazmat certification within six months of employment and complete hazmat recertification every two years.
• As a condition of continued dual status technician employment, the employee must maintain the position’s mandatory AFSC skill level and continue on-the-job proficiency requirements.
• As a condition of continued dual status technician employment, the employee must maintain local network access IAW AFMANs 33-152, User Responsibilities and Guidance for Information Systems and 33-282, Computer Security.
• Preplacement Medical Requirements: Selectee will be required to undergo medical testing, at the expense of the government, prior to beginning employment. Medical tests are used to determine fitness and eligibility for employment.
• Acceptance of a Federal position may terminate Tricare Reserve Select eligibility.
• For positions requiring a security clearance (Secret or Top Secret) the applicant must possess or be able to obtain a clearance within one year of appointment.

Qualifications

Military Grades: E-4 to E-6 Compatible Military Assignments: 2A871, 2A872, 2A971, 2A972 2A973 2A954 or 2A974 GENERAL EXPERIENCE: An applicant must have a validated understanding of the basic principles and concepts of the occupational series and grade. SPECIALIZED EXPERIENCE: The applicant must have at least 18 months experience involved duties such as, inspecting, testing, troubleshooting, repairing and modifying software controlled automated and manually controlled test stations, electronic circuit maintenance pods, peripherals, support equipment and associated subsystems; knowledgeable of stations that are used to repair and maintain all avionics line-replaceable and pods; skilled in analyzing performance results, running tests, inspecting, troubleshooting, identifying and isolating malfunctions; experienced in how to disassemble, modify or repair and reassemble test stations or electronic circuit maintenance pods and their associated peripherals; skills include the ability to consider the complex inter-related variables arising from a mix of computer hardware and software, stimulus and measurement systems, and special purpose test subsystems. Experienced in analyzing malfunctions using schematics, logic and wiring diagrams, programming tables, computer program flow charts, software user guides, computer program listings and factory drawings; skilled in the diagnoses of circuit operating characteristics using computer query, system peculiar test equipment, and computer diagnostics; experiences involved isolating problems to the failing part using self-test diagnostics, oscilloscopes, frequency meters, signal generators, digital, and differential voltmeters, computer registers and printouts and other special and standard tools and test equipment; skilled in removing and replacing components, assemblies, subassemblies, or parts using special and common hand tools, soldering devices and special electronic instruments experiences involved modifying and updating avionics pods, support equipment, and support software according to applicable technical publications; skilled in analyzing program data to determine if the criteria is sufficient to provide adequate testing and troubleshooting; experienced in the examination of recurring malfunctions and software deficiencies to determine testing voids and initiated corrective action by submission of quality deficiency reports, software deficiency reports or proposed modifications; skilled in devising repair procedures based on findings and recommending program changes, procedural changes, or data corrections to correct software deficiencies; experiences included connecting associated testing equipment to interface the test station system to the aircraft system and pod to facilitate maintenance/repair of the pod or line replaceable units from the avionics systems such as, radar, fire control, instrument, flight control, inertial navigation, malfunction analysis and recording equipment systems; skilled in determining if failures were caused by the unit under test, the pod, the test station, or the test program; skilled in identifying malfunctions in the unit under test, pod or the test station and isolating it to the specific component(s); experienced in repairing and replacing solid state devices, micro miniature modules, gyros, sensors, transducers, and any other required parts, and reassembling and performing operational tests; experiences included working with engineers and technicians in the development and/or modification of software, interfaces, extender equipment or additional items of test equipment and in validation of technical data concerning the repair, maintenance, and test of the test station and units under test. Skilled in initiating technical data changes; skilled in providing hands-on training instructions to lower-grade personnel concerned with repair of computer controlled automatic test equipment, manually controlled test equipment, line replaceable units and aircraft integrated systems; experiences included the preparation and participation in various types of readiness evaluations such as, Operational Readiness Inspections, Inspector General Inspections, and Unit Effectiveness Inspections and mobility and command support exercises; may have general knowledge in structural fire-fighting, aircraft fire, aircraft crash and rescue duty, security guard, snow removal, munitions loading and handling, heavy equipment operator, maintenance of facilities and equipment; skilled in the compliance requirements concerning safety, fire, security, and housekeeping regulations. Experienced in the procedures involved with the proper storage, protection, and maintenance of all work-related material and equipment; military medical record must indicate a completed and current medical physical, medical profile, a cleared drug test; and, normal color vision as defined in AFI 48-123, Medical Examinations and Standards; have the physical capability to stand, climb, walk, bend, crouch, reach, and stoop over extended periods of time; possess a valid state driver's license to operate government motor vehicles, for the state in which he or she lives or is principally employed, in accordance with Air Force and Air National Guard Vehicle Operations Directives. Must complete the hazmat certification within six months of employment and complete hazmat recertification every two years; maintain the position's mandatory AFSC skill level and continue on-the-job proficiency requirements; maintain local network access IAW AFMANs 33-152, User Responsibilities and Guidance for Information Systems and 33-282, Computer Security; requires routine access to classified Secret material or similar environment; award and retention of a compatible AFSC, the employee must have a current National Agency Check, Local Agency Checks and Credit (NACLC) according to AFI 31-501, Personnel Security Program Management. The employee's clearance reinvestigations are opened prior to the expiration of his or her current investigations.

Education

Education Requirement for ANG Dual Status Technician FWS 2610 positions:

1. Award of the compatible Air Force Specialty Code, Craftsman Seven Skill Level; Journeyman Five Skill Level; or, the Apprentice Three Skill Level, with the position's compatible unit position assignment and

2. High School Diploma: Completion of high school courses in physics, algebra, trigonometry, and computer principles is desirable. Higher academic college courses and degrees that are aligned within the FWS Series 2610 type of work tasks are also desirable.

The applicant's educational-degree study program or specific academic courses may substitute for some specialized experience. An applicant must demonstrate the identified specialized experience competencies (skills, knowledge, abilities and behaviors) to qualify for a FWS 2610 position as identified by its applicable grade.

You must provide transcripts or other documentation to support your educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.

Contacts

• Address TN 134th ARW 134 BRISCOE DRIVE ALCOA, TN 37777 US
• Name: THEODORE REGAN
• Phone: (615) 313-0606
• Email: [email protected]