THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for an Aircraft Ordnance Systems Mechanic, Position Description Number D0115000 and is part of the 158th Maintenance Squadron of the Vermont Air National Guard. **This position is also advertised to Active Guard Reserve Airmen under announcement number MVA-AF-24-40**

Duties

The primary purpose of this position is to perform on and off equipment maintenance on aircraft egress systems, such as aircraft ejection seats, extraction and escape systems, egress components of jettison canopies, explosive components of escape hatches and doors, and egress trainers. 1. Troubleshoots, installs, removes, repairs. modifies, adjusts, inspects, and tests such components as regulators, flow indicators, actuator motors, thruster and positioning mechanisms, seat actuators, catapult guide rails, ejection seats, rocket packs, and canopies, etc. Inspects for safety, serviceability, and maintainability of systems prior to installation, removal, repair, or adjustments of components and insures proper installation and positioning of safety pins. initiators, simulators, and clearing mechanisms. Visually inspects ballistic lines, tubes, hoses, and linkage for damage, deterioration, restrictions, and security of connections and mountings, and performs corrective maintenance as required. Stores egress explosives IAW AFOSH standards. 2. Inspects pressurization system air pressure gauges for sufficient pressure and bottles and regulators for general condition and serviceability. Checks canopy and capsule structure and associated seals, latches, and locks for damage and security. Installs and maintains Jet Assistance Take Off (JATO) systems when applicable. Isolates the malfunction and takes necessary corrective action. Positions, repairs, and adjusts required aerospace ground equipment, such as rail extensions, hoists, slings. dollies, and trailers used in performing maintenance tasks. 3. Performs installation, modification, and repair of aircraft egress systems. Solves unusual installation and maintenance problems by studying layout drawings, schematic and wiring diagrams, applicable technical publications, and analyzing construction and operating characteristics of egress systems. Selects proper maintenance and repair procedures and corrects the malfunction and/or defective equipment. Diagnoses recurring malfunctions and recommends corrective action by initiation of Quality Deficiency Reports, proposed modifications, or other appropriate action. Performs Time Compliance Technical Orders (TCTO'S) related to egress systems. 4. Prepares for and participates in various types of readiness evaluations such as ORI, IC and UE inspections, mobility, and command support exercises. May be required to perform such additional duties as structural firefighting, aircraft fire/crash/rescue duty, security guard, snow removal, munitions loading and handling. heavy equipment operator, maintenance of facilities and equipment, or serve as a member of a team to cope with natural disasters or civil emergencies. Performs other duties as assigned.

Requirements

• May occasionally be required to work other than normal duty hours; overtime may be required.
• This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
• May occasionally be directed to work other than normal duty hours.
• NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
• This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
• Selectee will be required to wear the military uniform.
• Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
• Males born after 31 December 1959 must be registered for Selective Service.
• Federal employment suitability as determined by a background investigation.
• May be required to successfully complete a probationary period.
• Participation in direct deposit is mandatory.
• Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission

Qualifications

NATIONAL GUARD MEMBERSHIP IS REQUIRED: This is a Title 32 excepted service position that requires membership in a compatible military assignment in the Vermont Air National Guard. Selectee will be required to wear the military uniform. Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment. Applicants who are not currently a member of the Vermont Air National Guard must be eligible for immediate membership. If you are not sure you are eligible for military membership, please contact a Vermont Air National Guard recruiter at (802) 660-8054 prior to applying for this position. OPEN AREAS OF CONSIDERATION: AREA 1, 2,3 Area I: All current On-board Permanent and Indefinite Dual Status 32 and Title 5 (Competitive and Excepted) Technicians (Tenure: 1-Career, 2-Conditional, 3-Indefinite) - Only those Vermont National Guard members who are in permanent or indefinite technician status as a result of being competitively hired within that National Guard component applying for a position within the component which they are currently employed. Area II: All Members of the Vermont Air National Guard. Area III: Currently assigned service members in other branches of the military outside of the VTNG, to include those assigned to Active Duty, Reserve or other state's National Guard. Military Grades: Military grade will be individually addressed up to SSgt/E5. GENERAL EXPERIENCE: -Experience or training which demonstrates the applicant's ability to repair malfunctions of ordnance equipment and components. Ability to use sketches, electrical diagrams, technical specifications, and engineering drawings. Experience which demonstrates skill in the use of test equipment to make electrical, hydraulic, and pneumatic checks. SPECIALIZED EXPERIENCE WG-6: Must have a minimum of 6 months experience or training which demonstrates the ability to learn procedures used to service, repair and maintain aircraft ordnance equipment. Experience which has demonstrated an ability to recognize various defects of equipment. Experience in the use of common hand tools. Experience showing the ability to follow written instruction. SPECIALIZED EXPERIENCE WG-8: Must have a minimum of 12 months experience or training in repair and installation of ordnance equipment and components such as launchers, pylons, bomb racks and actuators. Experience which required the ability to diagnose malfunctions. Experience in hand tools and a limited number of measuring instruments. Experience in the use of a variety of test equipment. Experience interpreting and applying a variety of technical manuals and similar published materials. SPECIALIZED EXPERIENCE WG-10: Must have a minimum of 18 months of experience in a position engaged in function such as installation, maintenance, or repair of aircrew egress systems. Must demonstrate through experience and/or appropriate training, a thorough knowledge of mechanical, pneumatic, and electrical principles as applied to aircrew egress systems: of the concepts embodied in AFM 66-1. Vol XII; and of the use and interpretation of blueprints, wiring diagrams and technical publications.Experience or training in planning and layout of repair sequence and ability to complete modification, repair and installation of ordnance systems. Experience in diagnosing and troubleshooting malfunctions and determining remedy where complex relationships exist. Experience in hand tools and a limited number of measuring equipment. Experience in interpreting technical directions, blueprints, sketches, wiring diagrams and manufacturer's specifications. Length of time is not of itself qualifying. Candidates' experience should be evaluated based on duties performed rather than strictly on the rank of the individual; however, established compatibility criteria/assignments must be followed. The applicant's record of experience and/or training must show possession of the knowledge, skills, and abilities needed to fully perform the duties of the position. Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics): -Knowledge or training in planning and layout of repair sequence and ability to complete modification, repair, and installation of ordnance systems. -Skill in diagnosing and troubleshooting malfunctions and determining remedies where complex relationships exist. -Ability to use hand tools and the use of a variety of measuring and test equipment. Experience in interpreting technical directions, blueprints, sketches, wiring diagrams, and manufacturer's specifications PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Please be advised: 1. Specialized experience will be used to determine qualifications for the announced position. 2. An applicant's RESUME must provide, in detail, how they meet the specialized experience listed. 3. It must be documented with "from (mm/yy)" and "to (mm/yy)" dates and description of the specialized experience. 4. If education or a degree is required as part of the "Specialized Experience", you must include transcripts. Do not copy the specialized experience qualifications word for word and place into your resume; you must describe your personal experience as it pertains to each statement.

Education

There are no specific educational requirements for this position.

Contacts

• Address 158th Maintenance Squadron Command 112 NCO Drive South Burlington, VT 05403 US
• Name: Alejandra Caballero
• Phone: 802-338-3147
• Email: [email protected]