The Safety and Occupational Health Specialist (Fire and Life Safety) position is located at the West Haven VA Medical Center. The position manages the Fire and Life Safety program and serves to develop and maintain a comprehensive fire safety and protection program for the VA Connecticut Healthcare System facilities through scheduled preventative maintenance, inspections, drills, and evaluations.

Duties

Major duties include but are not limited to: Manages the Fire and Life Safety Program. Performs routine scheduled preventive maintenance and inspection program on building fire service equipment. Conducts NFPA (National Fire Protection Association) required fire drills. Conducts fire and life safety workplace evaluations. Accompanies OSHA, EPA, or other occupational health and safety inspectors throughout VA facilities. Assists the Emergency Manager in conducting disaster drills that relate to chemical decontamination. Assists the Industrial Hygienist in the development of the environmental heath and safety program. Assists the Industrial Hygienist in collecting, transporting, and storing of hazardous waste. Maintains paper and electronic files as directed by the Safety Manager or Industrial Hygienist, to include surveys, inventories, drill response reports, etc. Ensures that fire response by staff is adequate in all areas of the VA facilities and takes action to correct deficiencies. Performs other safety tasks as assigned. Work Schedule: Monday - Friday, 7:30am - 4:00pm. Schedule may be adjusted to support facility needs. Virtual: This is not a virtual position. Position Description/PD#: Safety and Occupational Health Specialist/PD02656A

Requirements

Qualifications

To qualify for this position, applicants must meet all requirements by the closing date of this announcement, 10/18/2024. Time-In-Grade Requirement: Applicants who are current Federal employees and have held a GS grade any time in the past 52 weeks must also meet time-in-grade requirements by the closing date of this announcement. The grade may have been in any occupation, but must have been held in the Federal service. (This is separate from your experience and is mandated by statutory and regulatory requirements.) For a GS-11 position you must have served 52 weeks at the GS-09. An SF-50 that shows your time-in-grade eligibility must be submitted with your application materials. If the most recent SF-50 has an effective date within the past year, it may not clearly demonstrate you possess one-year time-in-grade, as required by the announcement. In this instance, you must provide an additional SF-50 that clearly demonstrates one-year time-in-grade. Note: Time-In-Grade requirements also apply to former Federal employees applying for reinstatement as well as current employees applying for Veterans Employment Opportunities Act of 1998 (VEOA) appointment. To qualify for this position, you must meet the Individual Occupational Requirements as described below: Education: Undergraduate and Graduate Education with a major study in safety or occupational health fields (safety, occupational health, industrial hygiene), or degree in other related fields that included or was supplemented by at least 24 semester hours of study from among the following (or closely related) disciplines: Safety, occupational health, industrial hygiene, occupational medicine, toxicology, public health, mathematics, physics, chemistry, biological sciences, engineering, and industrial psychology. OR, Experience: Experience in or related to safety and occupational health that provided the specific knowledge, skills, and abilities to perform successfully the duties of the position. Examples of qualifying specialized experience include: Managing safety or occupational health program elements. Developing and recommending safety and occupational health policy to higher levels of management. Applying safety and occupational health laws, regulations, principles, theories, practices, and procedures to advise on or resolve technical matters dealing with occupational safety and health requirements. Developing safety and occupational health standards, regulations, practices, and procedures to eliminate or control potential hazards. Developing or implementing programs to reduce the frequency, severity, and cost of accidents and occupational illnesses. Analyzing or evaluating new and existing jobs, processes, products, or other systems to determine the existence, severity, probability, and outcome of hazards. Designing or modifying workplaces, processes, products, or other systems to control or eliminate hazards. Inspecting or surveying workplaces, processes, products, or other systems for compliance with established safety and occupational health policies or standards and to identify potential new hazards. Training of workers, supervisors, managers, or other safety and occupational health personnel in safety or occupational health subjects. Work in occupational fields such as industrial hygienist, safety engineer, fire prevention engineer, health physicist, and occupational health nurse. OR, Certificates: Certification as a Certified Safety Professional (CSP), Certified Industrial Hygienist (CIH), or Certified Health Physicist (CHP), or similar certification that included successful completion of a written examination meets the requirements for GS-5. Applicants may also qualify for higher grade levels based on their education and/or experience. In addition to the above Individual Occupational Requirement, you must also qualify based on your experience and/or education as described below: Specialized Experience: You must have one year of specialized experience equivalent to at least the next lower grade (GS-09) in the normal line of progression for the occupation in the organization. Examples of specialized experience would typically include, but are not limited to: Managing safety or occupational health program elements; Developing and recommending safety and occupational health policy to higher levels of management; Applying safety and occupational health laws, regulations, principles, theories, practices, and procedures to advise on or resolve technical matters dealing with occupational safety and health requirements; Developing safety and occupational health standards, regulations, practices, and procedures to eliminate or control potential hazards; Developing or implementing programs to reduce the frequency, severity, and cost of accidents and occupational illnesses; Analyzing or evaluating new and existing jobs, processes, products, or other systems to determine the existence, severity, probability, and outcome of hazards; Designing or modifying workplaces, processes, products, or other systems to control or eliminate hazards; Inspecting or surveying workplaces, processes, products, or other systems for compliance with established safety and occupational health policies or standards and to identify potential new hazards; Training of workers, supervisors, managers, or other safety and occupational health personnel in safety or occupational health subjects; Work in occupational fields such as industrial hygienist, safety engineer, fire prevention engineer, health physicist, and occupational health nurse. OR, Education: Applicants may substitute education for the required experience. To qualify based on education for this grade level you must have successfully completed a Ph.D. or equivalent graduate degree or 3 full years of progressively higher level graduate education leading to such a degree or LL.M. if related. Degree must be relevant to the position to be filled. OR, Combination: Applicants may also combine education and experience to qualify at this level. You must have an combination of specialized experience and education beyond 2 years of graduate level education may be used to qualify applicants for positions at grades GS-11. The education and experience must be directly related to the work of the position to be filled. Preferred Experience: Direct experience with Fire and Life Safety programs, inspections, and conducting drills is preferred. You will be rated on the following Competencies for this position: CommunicationPersonnel Security and SafetyPublic Safety and SecuritySafety Engineering Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religions; spiritual; community; student; social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Note: A full year of work is considered to be 35-40 hours of work per week. Part-time experience will be credited on the basis of time actually spent in appropriate activities. Applicants wishing to receive credit for such experience must indicate clearly the nature of their duties and responsibilities in each position and the number of hours a week spent in such employment. Physical Requirements: The work involves the frequent performance of surveys and onsite visits to laboratory and maintenance shops necessitating prolonged periods of walking and standing. For more information on these qualification standards, please visit the United States Office of Personnel Management's website at https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/.

Education

A transcript must be submitted with your application if you are basing all or part of your qualifications on education.

Note: Only education or degrees recognized by the U.S. Department of Education from accredited colleges, universities, schools, or institutions may be used to qualify for Federal employment. You can verify your education here: http://ope.ed.gov/accreditation/. If you are using foreign education to meet qualification requirements, you must send a Certificate of Foreign Equivalency with your transcript in order to receive credit for that education. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.

Contacts

• Address West Haven VA Medical Center 950 Campbell Avenue West Haven, CT 06516 US
• Name: Thomas Rock
• Email: [email protected]