About the Position: Serve as Group Chief conducting and reporting on tests and studies of missile systems and components. There is one vacancy with each branch and location listed below: -MATERIEL TEST DIR PROGRAM MANAGEMENT DIV TACTICAL SYSTEMS BR White Sands Missile Range New Mexico Dona Ana County Located on main post -MATERIEL TEST DIR PROGRAM MANAGEMENT DIV AIR & MSL DEFENSE BR White Sands Missile Range New Mexico Otero County Located at Launch Complex (LC)-38, 14 miles from main post.

Duties

Direct and coordinate various assigned phases of the program and required test activities. Schedule work to be accomplished, instituting work measurements methods and establishing priorities within assigned areas. Determine overall approach and design of the test to insure the effective accomplishment of the testing desired. Revise the test programs as dictated by progressive system evaluation. Prepare interim or final reports or concurs. Establish detailed program schedules and records of Test Support Branches performance. Assign work and evaluate performance of subordinates. Give advice, counsel and instructions to individual employees on both work and administrative matters.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• This position requires the incumbent be able to obtain and maintain a determination of eligibility for a Secret security clearance or access for the duration of employment. A background investigation and credit check are required.
• A one year supervisory probation to assess your ability to perform supervisory duties is required unless previously completed.
• A one year supervisory probation to assess your ability to perform supervisory duties is required unless previously completed.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Department of Army Civilian EmployeesCurrent Department of Defense (DOD) Civilian Employee (non-Army)Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel WorkforceInteragency Career Transition Assistance PlanLand Management Workforce Flexibility ActMilitary Spouses, under Executive Order (E.O.) 13473Non-Department of Defense (DoD) TransferPriority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician EligiblePriority Placement Program, DoD Military Spouse Preference (MSP) EligiblePriority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability RetirementPriority Placement Program, DoD Retained Grade Preference EligibleVeterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the Basic Requirement and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience. To qualify for Basic Education Requirement on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Education Requirement for Engineering - 0801 series: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related Curriculum - Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. (You MUST submit a copy of your transcripts along with a letter of reference stating that you have at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. The letter must be signed by the engineer who provided the professional engineer supervision. It must also include their name, phone number, and list their engineer credentials such as engineer education or professional certificates). In addition to meeting the basic education requirement(s) above, to qualify for this position you must also meet the qualification requirements listed below: Specialized Experience: One year of specialized experience which includes experience in leading a team in test conduct on an open air test range of air and missile defense systems/precision fires system or other DoD equivalent. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service NH02 or GS11 or above. Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted. You will be evaluated on the basis of your level of competency in the following areas: Decision MakingGeneral EngineeringHuman Resources ManagementOral CommunicationOrganizational Awareness Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent NH02/GS11.

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.

Only degrees from an accredited college or university recognized by the Department of Education are acceptable to meet positive education requirements or to substitute education for experience. For additional information, please go to the Office of Personnel Management (OPM) and U.S. Department of Education websites at - http://www.opm.gov/qualifications and http://www.ed.gov/admins/finaid/accred/index.html

Contacts

• Address SE-W04WAA US ARMY TEST EVALUATION CMD-WHITE SANDS DO NOT MAIL White Sands Missile Range, NM 88002 US
• Name: Army Applicant Help Desk
• Email: [email protected]