This position is part of the Office of Nuclear Energy - Headquarters, Department of Energy. As a Supervisory Nuclear Engineer, you will be responsible for research and development on advanced material recovery and advanced waste form technologies that improve current fuel cycle performance with minimal processing, waste generation, and potential for material diversion.

Duties

As a Supervisory Nuclear Engineer, you will: Manage the integrating and coordinating advanced special nuclear material management and safeguards technologies. Conduct innovative, early-stage research and development on advanced fuel recycling technologies. Manage the programmatic and technical requirements and development of relevant planning documents. Manage the planning and design of engineering-scale demonstration and test facilities as needed. Collaborate with other agencies and industry in addressing the regulatory, technical, and institutional issues to enable the licensing, construction and operation of fuel cycle facilities. Collaborate with the nuclear industry to assure coordination of technical goals regarding the research activities and/or the design, construction, and operation of fuel cycle research and demonstration facilities.

Requirements

• You must be a U.S. Citizen or National.
• This employer participates in the e-Verify program.
• If you are a male applicant born after December 31, 1959, you must certify that you have registered with the Selective Service System or are exempt from having to do so under the Selective Service Law. See www.sss.gov.
• If selected, your appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• If selected, you may be required to complete a one year probationary period and complete 80 hours of supervisory training of which 40 hours must be completed during your first year as a supervisor.
• This position does not support 100% remote work. You will be required to report physically to the official reporting worksite as specified by the supervisor, but no less than 2 days per pay period.
• You are required to submit a Financial Disclosure Statement, OGE-450, Executive Branch Personnel Confidential Financial Disclosure Report within 30 days of entering the position and annually.
• First time supervisors will be required to serve a 1-year probationary period.
• This position is a Testing Designated Position (TDP) subject to applicant testing and random drug testing thereafter. Failure to test or a positive result on random drug tests conducted after appointment may result in removal from Federal employment.
• A preliminary background check must be completed before a new employee can begin work. Current Federal employees or other individuals with an existing completed background investigation may not be required to undergo another background check.
• This position has been designated as Critical Sensitive and requires a security clearance at the Q LEVEL. The incumbent is required to obtain and maintain this clearance; failure to do so may result in separation from federal service.

Qualifications

You must meet both the Basic Requirement and Specialized experience to qualify for this series. Basic Requirements: for a Nuclear Engineer A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) 2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.) SPECIALIZED EXPERIENCE REQUIREMENTS: A qualified candidate's online application and resume must demonstrate at least one year of specialized experience equivalent to the next lower grade level GS-14 in the Federal service. Specialized experience for this position is defined as meeting 2 OF THE 3 of the following Manage collaborative nuclear energy R&D and activities with industry in addressing the regulatory, technical, and institutional issues to enable the licensing, construction and operation of fuel cycle facilities. Assist in conducting nuclear research and development of advanced material recovery and advanced waste form technologies. Oversee planning and design of engineering-scale demonstration and test facilities to demonstrate innovative nuclear fuel cycle technology options. "Experience" refers to paid and unpaid experience. Examples of qualifying unpaid experience may include: volunteer work done through National Service programs (such as Peace Corps and AmeriCorps); as well as work for other community-based philanthropic and social organizations. Volunteer work helps build critical competencies, knowledge, and skills; and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. CTAP/ICTAP candidates: To be considered "well qualified" you must (1) meet all of the requirements as described in this section; and 2) be rated "well-qualified", which is defined as scoring in the in Well Qualified category (or higher). You must meet all qualifications and eligibility requirements by the closing date of this announcement.

Education

This vacancy has a positive education requirement. In order to be rated as qualified, you must provide copies of your college transcripts. Failure to provide copies of your college transcripts may result in a rating of "Ineligible". Education must be obtained from an accredited institution recognized by the U.S. Department of Education. Foreign education must be reviewed by an organization recognized by the U.S. Department of Education. For special instructions pertaining to foreign education and a list of organizations that can evaluate foreign education, see the Department of Education website.

Contacts

• Address Office of Nuclear Energy - Headquarters P.O. Box 5088 Oak Ridge, TN 37831 US
• Name: Michelle Darji
• Phone: 240-405-8563
• Email: [email protected]