You will serve as an ENGINEER/SCIENTIST in the Special Warfare & Expeditionary Systems Department (JX) within the Electro-Optic Technology Division (JXQ) of NAVAL SURFACE WARFARE CENTER. This position is part of the Warfare Centers Personnel Demonstration Project. The ND-05 pay band encompasses positions equivalent to GS-14 and GS-15.

Duties

You will serve as the Test and Evaluation (T and E) Chief Engineer (CHENG) for Electro-Optic Technology Division (EOTD). You will advise division leadership on matters pertaining to the current and future state of T and E capabilities and the general state of EO/IR technology. You will develop a long-term vision for EO/IR T and E capabilities in tandem with Chief Engineer and Chief Scientist and communicate across organization. You will manage upgrades and enhancements such as: facility enhancements, test equipment acquisition, installations, etc. You will assist in obtaining funding sources and/or proposals to aid in T and E upgrades such as Crane Capital Investment Programs (CIP), T and E Focused NISE proposals, DON T and E Proposals, to pursue funding for future T and E capabilities. You will generate and manage processes for Validation and Verification of division programs in a manner that supports test and product requirements traceability.

Requirements

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time

Qualifications

In addition to the Basic Requirements for this position, your resume must demonstrate at least one year of specialized experience at or equivalent to the next lower pay band, ND-04 (GS-12/13 equivalent grade level) in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: as a professional engineer or scientist, providing programmatic and technical leadership in test and evaluation, integration, or upgrade of warfare technology (e.g. electro-optic; infrared; laser) system requirements to meet validation and transition objectives for weapons programs. Additional qualification information can be found from the following Office of Personnel Management website: Professional Engineering Series, 0801, IOR: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf General Physical Science Series, 1301, IOR: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/1300/general-physical-science-series-1301/ General Mathematics and Statistics Series, 1501, IOR: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/1500/general-mathematics-and-statistics-series-1501star/ Operations Research Series, 1515, IOR: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/1500/operations-research-series-1515/ Computer Science Series, 1550, IOR: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/1500/computer-science-series-1550/ Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

FOR 0801:
Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.

OR

Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org

OR

Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.

OR

Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)

OR

Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

FOR 1301:

A. Successful completion of a bachelor's degree or higher in physical science, engineering, or mathematics that included 24 semester hours in physical science and/or related engineering science such as mechanics, dynamics, properties of materials, and electronics.

OR

B. Have a combination of education and experience with education equivalent to one of the majors shown above that included at least 24 semester hours in physical science and/or related engineering science, plus appropriate experience or additional education.

FOR 1501:

A. Successful completion of bachelor's or higher degree in mathematics, statistics, or actuarial science.

OR

B. Have a combination of experience and education achieved from courses equivalent to a major field of study in mathematics, statistics, or actuarial science, plus additional education or appropriate experience.

FOR 1515:

A. Successful completion of bachelor's or higher degree in operations research.

OR

B. Successful completion of a bachelor's or higher degree with at least 24 semester hours in a combination of operations research, mathematics, probability, statistics, mathematical logic, science, or subject-matter courses requiring substantial competence in college-level mathematics or statistics and at least 3 of the 24 semester hours are in calculus.

FOR 1550:

A. Successful completion of a bachelor's degree in Computer Science.

OR

B. Successful completion of a bachelor's or higher degree with 30 semester hours in a combination of mathematics, statistics, and computer science. At least 15 of my 30 semester hours were in a combination of statistics and mathematics that included differential and integral calculus.

Contacts

• Address NAVAL SURFACE WARFARE CENTER 300 Highway 361 Crane, IN 47522-5001 US
• Name: Department of Navy EIC
• Email: [email protected]