See below for important information regarding this job.

Duties

The below responsibilities will be performed in a developmental capacity. Provide technical support for the procurement of complex, high technology, medical capital equipment and systems with turnkey installation for military and other federal government customers. Perform market research and advise customers and contracting staff regarding technical advancements relating to existing systems as well as new developments in high technology medical equipment. Review customer purchase request documents for completeness and accuracy. Recommend updates or revisions based on knowledge of product and vendor contracts. Review inspection results and reports for complex medical equipment and systems, and turnkey installation, to determine contractor technical compliance with contract requirements. Perform technical analysis of contractor submittals to assure equipment specifications and proposals meet requirements. Review turnkey installation requirements and contractor statements of work and cost breakdowns to determine acceptability and provide recommendations to the contracting officer. Determines need for and advises customer of necessary revisions to purchase requests (PR) and contract provisions used in the procurement of complex medical equipment and systems. Conducts studies or resolves problems on quality characteristics or technical aspects of new items or Items previously causing difficulties. Identifies recurring equipment problems and assesses the responsiveness of contractor service. Provides the technical and quality expertise necessary to translate and coordinate specifications requirements incident to the manufacture of complex medical equipment and systems.

Requirements

• Must be a U.S. citizen
• Tour of Duty: Flexible
• Security Requirements: Non-Critical Sensitive
• Appointment is subject to the completion of a favorable suitability or fitness determination, where reciprocity cannot be applied; unfavorably adjudicated background checks will be grounds for removal.
• Fair Labor Standards Act (FLSA): Exempt GS-12 / Non-Exempt GS-05/07/09/11
• Selective Service Requirement: Males born after 12-31-59 must be registered or exempt from Selective Service.
• Recruitment Incentives: Not Authorized
• Bargaining Unit Status: Yes

Qualifications

To qualify for a Biomedical Engineer your resume and supporting documentation must support:A. Basic Requirement: A Bachelor's Degree or higher in professional engineering. To be acceptable, the program must:(1) be in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.ORA combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: Professional Registration or Licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. Specified Academic Courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the Basic Requirements above. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum as described in the Basic Requirements above. Related Curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g. engineering technology physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. B. Specialized Experience: One year of specialized experience that equipped you with the particular competencies to successfully perform the duties of the position, and is directly in or related to this position. To qualify for the GS-07 grade level, specialized experience must be at the GS-05 grade level or equivalent under other pay systems in the Federal service, military or private sector. To qualify for the GS-09 grade level, specialized experience must be at the GS-07 grade level or equivalent under other pay systems in the Federal service, military or private sector. Applicants must meet eligibility requirements including time-in-grade (General Schedule (GS) positions only), time-after-competitive appointment, minimum qualifications, and any other regulatory requirements by the cutoff/ closing date of the announcement. Creditable specialized experience includes: GS-07: Researching and evaluating both current and emerging high technology medical capital equipment technologies with supervision and guidance; Providing consultation relating to acquisition of complex high technology medical equipment with turnkey installation with supervision and guidance; Evaluating customer's turnkey installation requirements and developing appropriate technical data packages with supervision and guidance. GS-09: Researching and evaluating both current and emerging high technology medical capital equipment technologies; Providing consultation to the relating to acquisition of complex high technology medical equipment with turnkey installation; Evaluating customer's turnkey installation requirements and developing appropriate technical data packages. GS-11: Researching and evaluating both more advanced high technology medical capital equipment technologies; Providing advanced consultation to the relating to acquisition of complex high technology medical equipment with turnkey installation; Evaluating customer's turnkey installation requirements and developing advanced technical data packages. GS-12: Serving as a Senior Biomedical Engineer analyzing advanced high technology medical capital equipment technologies; Providing senior level consultation related to acquisition of complex high technology medical equipment with turnkey installation; Developing high level technical packages based on the evaluation of Medical customer's turnkey installation requirements Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Education

C. Education Substitution: Such education must demonstrate the knowledge, skills, and abilities necessary to do the work. Education must be from a college or university accredited by an organization approved by the U.S. Department of Education. See http://ope.ed.gov/accreditation/Search.aspx. If using education to meet basic qualifications, YOU MUST SUBMIT A TRANSCRIPT as supplemental documentation. To qualify based on education in lieu of specialized experience, you must possess:

• GS-07: One year of graduate-level education or superior academic achievement.
• GS-09: Two years of progressively higher level graduate education leading to a master's degree or master's or equivalent graduate degree.
• GS-11: Three (3) years of progressively higher level graduate education leading to a Ph.D. degree or Ph.D. or equivalent doctoral degree.
• GS-12: Cannot substitute education in lieu of specialized experience.

D. Combination: Combinations of successfully completed post-high school education and experience may be used to meet total qualification requirements for grade levels GS-07, GS-09 and GS-11, and may be computed by first determining the applicant's total qualifying experience as a percentage of the experience required for the grade level; then determining the applicant's education as a percentage of the education required for the grade level; and then adding the two percentages. The total percentages must equal at least 100 percent to qualify an applicant for that grade level. Only graduate education in excess of the amount required for the next lower grade level may be used to qualify applicants for positions at gradeGS-07, GS-09, and GS-11. At the GS-09 grade level a combination of superior academic achievement and 1 year of appropriate professional experience OR successful completion of a 5-year program of study of at least 160 semester hours and 1 year of appropriate professional experience is qualifying.

E. Additional Experience and Training Provisions for Graduates of Engineering Programs: a) Superior academic achievement at the baccalaureate level in an engineering program is qualifying for GS-7; b) A combination of superior academic achievement and 1 year of appropriate professional experience is qualifying at GS-9; c) Applicants with an engineering bachelor's degree who have appropriate experience as a technician equivalent to grade GS-5 or higher may have such experience credited for grade GS-7 only on a month-for-month basis up to a maximum of 12 months; d) Successful completion of a 5-year program of study of at least 160 semester hours leading to a bachelor's degree in engineering is qualifying at GS-7. Completion of such a program and 1 year of appropriate professional experience is qualifying at grade GS-9.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

GS-12: Substitution of education may not be used in lieu of specialized experience for this grade level.

GS-05 to GS-11: Are you using your education to qualify? You MUST provide transcripts or other documentation to support your educational claims. Unless otherwise stated: Unofficial transcripts are acceptable at time of application.

GRADUATE EDUCATION: One academic year of graduate education is considered to be the number of credits hours that your graduate school has determined to represent one academic year of full-time study. Such study may have been performed on a full-time or part-time basis. If you cannot obtain your graduate school's definition of one year of graduate study, 18 semester hours (or 27 quarter hours) should be considered as satisfying the requirement for one year of full-time graduate study.

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show that the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university.

Contacts

• Address DLA Troop Support 700 Robbins Avenue Philadelphia, PA 19111 US
• Name: Stephen Ferraro
• Email: [email protected]