Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information. The primary purpose of this position is to perform work in a broad range of occupational safety program elements, such as inspections/surveys, assessments, evaluations, mishap investigations, and safety training.

Duties

Performs a broad range of safety and occupational health duties in one or more areas of safety and occupational health. Plans and carries out formal investigations of reportable and non-reportable mishaps involving personal injury accidents, property damage, covering a wide range of work operations. Develops specialized operating practices, modifying or departing significantly from standard techniques, when necessary, based on interpretation of policies, standards, and regulations. Reviews plans and specifications for new construction, major building alterations, and/or changes in installation equipment and monitors project through completion to ensure compliance with safety codes and standards. Provides technical safety training/instruction to supervisors, employees, and/or unit safety representatives on a wide range of work operations areas, such as traffic safety techniques, proper storage of hazardous materials, common laboratory hazards, and building evacuation procedures.

Requirements

• Must complete initial online questionnaire and additional assessment(s)
• U.S. Citizenship is required
• Males must be registered for Selective Service, see www.sss.gov
• If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: https://afciviliancareers.com/regulatory/
• This position is subject to provisions of the DoD Priority Placement Program
• Disclosure of Political Appointments
• Work may occasionally require travel away from the normal duty station.
• Incumbent may occasionally be required to be in an on-call status outside normal duty hours or on holidays.
• Must be able to obtain and maintain a Secret Clearance.
• A pre-employment physical examination will be required.
• Required to have successfully completed L3AZR2W071-0C2A, Weapons Safety Course, PDS Code 1DO or equivalent Explosives Safety course upfront.

Qualifications

In order to qualify, you must meet the specialized experience requirements described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, to include the Individual Occupational Requirements (IOR) for the GS Safety & Occupational Health Management Series 0018 and the Group Coverage Qualification Standard for Administrative and Management Positions. SPECIALIZED EXPERIENCE: Applicants must have at least one year of specialized experience which is equivalent to Federal experience at the next lower grade (GS-09) level or equivalent (grade level, pay schedule, pay band, etc.) and is described in detail in their resume. An example of creditable specialized experience includes work in any of the following: Managing safety or occupational health program elements; Developing and recommending safety and occupational health policy to higher levels of management; Applying safety and occupational health laws, regulations, principles, theories, practices, and procedures to advise on or resolve technical matters dealing with occupational safety and health requirements; Developing safety and occupational health standards, regulations, practices, and procedures to eliminate or control potential hazards; Developing or implementing programs to reduce the frequency, severity, and cost of accidents and occupational illnesses; Analyzing or evaluating new and existing jobs, processes, products, or other systems to determine the existence, severity, probability, and outcome of hazards; Designing or modifying workplaces, processes, products, or other systems to control or eliminate hazards; Inspecting or surveying workplaces, processes, products, or other systems for compliance with established safety and occupational health policies or standards and to identify potential new hazards; Training of workers, supervisors, managers, or other safety and occupational health personnel in safety or occupational health subjects; Work in occupational fields such as industrial hygienist, safety engineer, fire prevention engineer, health physicist, and occupational health nurse. OR EDUCATION: Applicants must have successfully completed a Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree or LL.M., if related: Major study -- safety or occupational health fields (safety, occupational health, industrial hygiene), or graduate in other related fields that included or was supplemented by at least 24 semester hours of study from among the following (or closely related) disciplines: safety, occupational health, industrial hygiene, occupational medicine, toxicology, public health, mathematics, physics, chemistry, biological sciences, engineering, and industrial psychology. (NOTE: You must submit a copy of your transcripts.) OR COMBINATION OF EXPERIENCE AND EDUCATION: Applicants must have successfully completed a post master's or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to such a degree or LL.B. or J.D., if related, Major study -- safety or occupational health fields (safety, occupational health, industrial hygiene), or graduate in other related fields that included or was supplemented by at least 24 semester hours of study from among the following (or closely related) disciplines: safety, occupational health, industrial hygiene, occupational medicine, toxicology, public health, mathematics, physics, chemistry, biological sciences, engineering, and industrial psychology and have specialized experience directly related to the work of the position as outlined above that meets the requirements of the position. The total percentages must equal at least 100 percent to qualify an applicant. (Note: You must attach a copy of your transcripts) OR CERTIFICAITON: Applicant must possess Certified Safety Professional (CSP), Certified Industrial Hygienist (CIH), or Certified Health Physicist (CHP), or similar certification that included successful completion of a written examination meets the requirements for GS-05. Applicants may also qualify for higher grade levels based on their education and/or experience. FEDERAL TIME-IN-GRADE (TIG) REQUIREMENT FOR GENERAL SCHEDULE (GS) POSITIONS: Merit promotion applicants must meet applicable time-in-grade requirements to be considered eligible. One year at the GS-09 level is required to meet the time-in-grade requirements for the GS-11 level. TIG applies if you are in a current GS position or held a GS position within the previous 52 weeks. NOTE: Applicants applying as VEOA candidates who are current GS civil service employees or are prior GS civil service employees within the past 52 weeks must also meet time-in-grade requirements. KNOWLEDGE, SKILLS, AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: Knowledge of numerous established safety and occupational health principles, practices, procedures, laws, regulations, and current legislative issues as they relate to the military installation occupational safety program; the requirements, methods, and techniques of accident and mishap investigation, analysis, resolution of normal occupational safety problems/health risks, and formal reporting procedures; and risk assessment methods and techniques for evaluating normal safety and occupational health risks. Knowledge of communication techniques, principles, and regulations to communicate effectively, both orally and in writing, in responding to work related problems and questions. Knowledge of basic construction standards, methods, practices, techniques, materials, and equipment to determine compliance with regulations and standards. Knowledge of standard training techniques, methods, and materials sufficient to prepare and present formal training and instructional sessions. Skill in the interpretation of engineering drawings and specifications sufficient to identify hazardous conditions in proposed facilities. Ability to plan, organize work, and meet deadlines. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Education

IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience, transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation.

FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying.

********************ADDITIONAL INFORMATION FOR ACTIVE DUTY SERVICES MEMBERS********************

ACTIVE DUTY SERVICE MEMBERS: The VOW Act requires federal agencies to treat an eligible active duty service member as a veteran, disabled veteran, and preference eligible (as applicable) when applying for civil service positions before the effective release or discharge date. Appointment of military members before the release or discharge date is permissible if the member is on terminal leave. At the time the active duty member applies for a civil position, he or she must submit a "certification" memo in lieu of a DD-Form 214, Certificate of Release or Discharge from Active Duty. Active duty members applying for a civil service position without submitting a valid certification memo or DD-Form 214 with their application will render the member ineligible for the position. The certification memo must originate from the member's military service branch on official letterhead and contain the following:

• Name/Rank/Grade of Service Member
• Branch of Armed Forces
• Dates of Active Service (Start and End Date(s)
• Expected Date of Discharge/Release from Active Duty
• Terminal leave start date (if applicable)
• Expected character of service (honorable or general) and type of separation (i.e. separation or retirement)
• Must be certified within 120 days of anticipated discharge
• Signature by, or by direction of the adjutant, personnel office, unit commander, or higher headquarters commander.

Note: The VOW Act provides tentative preference. If appointed, a DD Form-214 must be submitted upon receipt

Contacts

• Address JBSA Fort Sam Houston 2484 Stanley Rd, Bldg 2263, Ste 323 JBSA Fort Sam Houston, TX 78234 US
• Name: Total Force Service Center
• Phone: 1-800-525-0102
• Email: [email protected]