About the Position: You will function as a Safety and Occupational Health Specialist with the Army Corps of Engineers, Nashville Integrated Project, located in Grand Rivers, Kentucky. Providing consultation and expert advice to field office construction managers on safety and occupational health requirements, standards, and procedures.

Duties

Assist field office construction managers in planning and managing a comprehensive safety and occupational health program to eliminate or control the risk of injury. Inspect all construction project sites as required for compliance with the stricter of the two regulations, EM 385-1-1 and OSHA 1926 Construction. Provide support in implementing the medical surveillance program, the hearing conservation program, and the respiratory protection program for construction field offices. Visit project sites looking for unhealthy conditions, unsafe noise levels, problems where respiratory equipment would be required and potential problems with toxic chemicals exist. Investigate and provide written report on mishaps involving injury to contractor personnel or damage to machinery, tools, materials or equipment. Develop and provide technical safety training to Construction field office personnel using a wide variety of materials, publications, exhibits, protective devices, and visual aids.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• Must possess and maintain a valid state-issued motor vehicle driver's license.
• Duty requires up to 15% travel time.
• May be selected at any grade level with non-competitive promotion potential to target grade. Non-competitive promotion potential to the target grade based on time-in-grade requirements and demonstrated ability to perform the higher graded duties.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Civilian Employees of the OrganizationCurrent Department of Army Civilian EmployeesCurrent Department of Defense (DOD) Civilian Employee (non-Army)Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel WorkforceInteragency Career Transition Assistance PlanLand Management Workforce Flexibility ActMilitary Spouses, under Executive Order (E.O.) 13473Non-Department of Defense (DoD) TransferPriority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician EligiblePriority Placement Program, DoD Military Spouse Preference (MSP) EligiblePriority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability RetirementPriority Placement Program, DoD Retained Grade Preference EligibleVeterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. To qualify at the GS-07 grade level, you must have: Specialized Experience: One year of specialized experience which includes administering safety awareness program; update safety and occupational health procedures and policies; provide safety and occupational health training; conduct follow-up for accidents of a recurring nature to identify trends and specific areas in need of extensive study. The OPM Qualification Standard provides the following examples: Managing safety or occupational health program elements. Developing and recommending safety and occupational health policy to higher levels of management. Applying safety and occupational health laws, regulations, principles, theories, practices, and procedures to advise on or resolve technical matters dealing with occupational safety and health requirements. Developing safety and occupational health standards, regulations, practices, and procedures to eliminate or control potential hazards. Developing or implementing programs to reduce the frequency, severity, and cost of accidents and occupational illnesses. Analyzing or evaluating new and existing jobs, processes, products, or other systems to determine the existence, severity, probability, and outcome of hazards. Designing or modifying workplaces, processes, products, or other systems to control or eliminate hazards. Inspecting or surveying workplaces, processes, products, or other systems for compliance with established safety and occupational health policies or standards and to identify potential new hazards. Training of workers, supervisors, managers, or other safety and occupational health personnel in safety or occupational health subjects. Work in occupational fields such as industrial hygienist, safety engineer, fire prevention engineer, health physicist, and occupational health nurse. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-05); OR Education: One full academic year of graduate-level education with a major study in safety or occupational health fields (safety, occupational health, industrial hygiene). OR Superior Academic Achievement: Successful completion of all the requirements for a bachelor's degree with a major study in safety or occupational health fields (safety, occupational health, industrial hygiene) OR degree in other related fields that included or was supplemented by at least 24 semester hours of study from among the following (or closely related) disciplines: safety, occupational health, industrial hygiene, occupational medicine, toxicology, public health, mathematics, physics, chemistry, biological sciences, engineering, and industrial psychology with Superior Academic Achievement. In order to be creditable under this provision, Superior Academic Achievement must have been gained in a curriculum that is qualifying for the position to be filled. Superior Academic Achievement is based on: (1) Class Standing - Applicants must be in the upper third of the graduating class in the college, university, or major subdivision, such as the College of Liberal Arts or the School of Business Administration, based on completed courses; OR (2) Grade-Point Average (G.P.A.) - Applicants must have a grade-point average of either (a) 3.0 or higher out of a possible 4.0 ("B" or better) as recorded on your official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or (b) 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2 years of the curriculum.; OR (3) Honor Society Membership - Applicants may be considered eligible based on membership in one of the approved national scholastic honor societies listed by the Association of College Honor Societies (https://www.achsnatl.org/). To qualify at the GS-09 grade level, you must have: Specialized Experience: One year of specialized experience which includesformulating policy and guidance for comprehensive safety program that encompasses entire organization; providing guidance concerning application of regulations; performing field surveys of work sites; ensuring employees are trained in Safety and Occupational Health; developing Safety and Occupational health procedures and policies. Examples of qualifying specialized experience include: Managing safety or occupational health program elements. Developing and recommending safety and occupational health policy to higher levels of management. Applying safety and occupational health laws, regulations, principles, theories, practices, and procedures to advise on or resolve technical matters dealing with occupational safety and health requirements. Developing safety and occupational health standards, regulations, practices, and procedures to eliminate or control potential hazards. Developing or implementing programs to reduce the frequency, severity, and cost of accidents and occupational illnesses. Analyzing or evaluating new and existing jobs, processes, products, or other systems to determine the existence, severity, probability, and outcome of hazards. Designing or modifying workplaces, processes, products, or other systems to control or eliminate hazards. Inspecting or surveying workplaces, processes, products, or other systems for compliance with established safety and occupational health policies or standards and to identify potential new hazards. Training of workers, supervisors, managers, or other safety and occupational health personnel in safety or occupational health subjects. Work in occupational fields such as industrial hygienist, safety engineer, fire prevention engineer, health physicist, and occupational health nurse. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-07) Qualifications Continued in Education

Education

To qualify at the GS-09 grade level (continued):
OR
Education: Master's or equivalent graduate degree; OR 2 full years of progressively higher level graduate education leading to such a degree in a major study in safety or occupational health fields (safety, occupational health, industrial hygiene), or degree in other related fields that included or was supplemented by at least 24 semester hours of study from among the following (or closely related) disciplines: safety, occupational health, industrial hygiene, occupational medicine, toxicology, public health, mathematics, physics, chemistry, biological sciences, engineering, and industrial psychology.

To qualify at the GS-11 grade level, you must have:
Specialized Experience: One year of specialized experience which includes managing safety and occupational health policy to higher levels of management; applying safety and occupational health laws, regulations, principles, theories, practices, and procedures to advise on or resolve technical matters dealing with occupational safety and health requirements; inspecting or surveying workplaces; processes, products, or other systems to control or eliminate hazards which are typically in or related to this position. Examples of qualifying specialized experience include: Managing safety or occupational health program elements. Developing and recommending safety and occupational health policy to higher levels of management. Applying safety and occupational health laws, regulations, principles, theories, practices, and procedures to advise on or resolve technical matters dealing with occupational safety and health requirements. Developing safety and occupational health standards, regulations, practices, and procedures to eliminate or control potential hazards. Developing or implementing programs to reduce the frequency, severity, and cost of accidents and occupational illnesses. Analyzing or evaluating new and existing jobs, processes, products, or other systems to determine the existence, severity, probability, and outcome of hazards. Designing or modifying workplaces, processes, products, or other systems to control or eliminate hazards. Inspecting or surveying workplaces, processes, products, or other systems for compliance with established safety and occupational health policies or standards and to identify potential new hazards. Training of workers, supervisors, managers, or other safety and occupational health personnel in safety or occupational health subjects. Work in occupational fields such as industrial hygienist, safety engineer, fire prevention engineer, health physicist, and occupational health nurse. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-09);

OR

Education: Ph.D. or equivalent doctoral degree; or 3 full years of progressively higher level graduate education leading to such a degree in a major study in safety or occupational health fields (safety, occupational health, industrial hygiene), or degree in other related fields that included or was supplemented by at least 24 semester hours of study from among the following (or closely related) disciplines: safety, occupational health, industrial hygiene, occupational medicine, toxicology, public health, mathematics, physics, chemistry, biological sciences, engineering, and industrial psychology.

You will be evaluated on the basis of your level of competency in the following areas:

• Compliance Inspection
• Oral Communication
• Risk Management
• Technical Competence

GS-07: Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-05).

GS-09: Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-07).

GS-11: Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-11).

To be referred, applicants must meet applicable time-in-grade and specialized experience requirements within 30 calendar days after the closing date of the announcement.

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.

Contacts

• Address RE-W2SM03 US ARMY ENGINEER DISTRICT-NASHVILLE DO NOT MAIL Nashville, TN 37203 US
• Name: Army Applicant Help Desk