Job opening: SUPERVISORY GENERAL ENGINEER
Salary: $125 786 - 191 900 per year
Relocation: YES
Published at: Jul 29 2024
Employment Type: Full-time
You will serve as a SUPERVISORY GENERAL ENGINEER in the SHIPBOARD SYSTEMS (SPS), TECHNICAL BRANCH of PMO SSP SHIPBOARD PROGRAM SYS.
This position is part of the Department of Defense Civilian Acquisition Workforce Personnel Demonstration Project. The NH-4 broadband level encompasses positions equivalent to GS-14 and GS-15.
Duties
You will serve as a Technical Manager in the Fire Control Department where they will supervise their personnel and ensure they are staffed, trained, and equipped in performing their duties.
You will provide oversight of the prime contractor’s efforts associated with the design, development, production, repair, logistics support, and comprehensive life cycle support of the SWS Fire Control System (FCS) and AWCS.
You will evaluate the efforts of the contractor (using inputs/actions from DCMA and their personnel) in achieving contract and program milestones with respect to technical, cost, and schedule requirements.
You will schedule, plans, coordinates, and directs work performed by government civilians.
You will review and approve documentation used by personnel in the operation, testing, troubleshooting, maintenance, and repair of equipment developed under the prime contractor.
You will establish goals and objectives consistent with the goals and objectives of SPS and assures the quality and efficiency of the team's contribution.
You will provide program assessments and identifies risks on all FCS/AWCS programs as identified in the approved Mission, Functions, and Tasks SSP Instruction.
You will coordinate FCS/AWCS technical work with SP23 as needed.
Requirements
- Must be a US Citizen.
- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
- Males born after 12-31-59 must be registered for Selective Service.
- You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
- This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
- This position is a designated Critical Acquisition Position (CAP). You must sign a three-year tenure agreement prior to assuming the position unless a tenure waiver is approved.
- Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
- Supervisors in the executive branch have a heightened personal responsibility for advancing government ethics. You will be required to review the 14 General Principles of Ethical Conduct at 5 CFR 2635.101.
Qualifications
Your resume must demonstrate at least one year of specialized experience at or equivalent to the NH-03 (GS-13) grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: as a professional engineer, leading teams in program planning, program evaluation, or requirements for systems.
.
Additional qualification information can be found from the following Office of Personnel Management website:
https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
Education
Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
OR
Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org
OR
Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit:
http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.
OR
Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)
OR
Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
Contacts
- Address PMO SSP SHIPBOARD PROGRAM SYS
1250 10th Street SE
Washington Navy Yard, DC 20374-5127
US
- Name: Department of Navy EIC
- Email: doneic@us.navy.mil
Map
To navigate, press the arrow keys.