Over 1 Million Paying Vacancies Available. Discover Your Dream Vacancy with Us!

Are you looking for a MECHANICAL ENGINEER? We suggest you consider a direct vacancy at United States Fleet Forces Command in Naval Shipyard, Portsmouth. The page displays the terms, salary level, and employer contacts United States Fleet Forces Command person

Job opening: MECHANICAL ENGINEER

Salary: $88 183 - 114 634 per year
Published at: Jul 19 2024
Employment Type: Full-time
You will serve as a MECHANICAL ENGINEER in the Temporary Services /Steam Plant Cleanliness Branch (Code 269), Fluid/Mechanical Engineering and Planning Division (Code 260), Office of Chief Engineer (Code 240), Engineering and Planning Department (Code 200), of NORFOLK NAVAL SHIPYARD.

Duties

You will prepare advance planning Technical Work Documents (TWD's) in the form of Engineering Drawings, Job Summaries, Task Group Instructions (TGI's), Production Estimates, testing, and material procurement documents. You will review existing Ship Installation Drawings and equipment technical manuals to determine characteristics of temporary services required. You will complete Ship Checks and inspect shore facilities to verify arrangement and to identify locations for new equipment, connection points to ship systems, and associated piping runs. You will provide direction for procurement of material and services associated with the assigned projects. You will identify material costs and production man hours required for all phases of tasking for incorporation into Job Summaries and for preplanning use by shipyard customers. You will provide waterfront support during execution of temporary services system installation, removal, modification and repair, and loss of steam plant cleanliness evaluation and recovery. You will resolve problems encountered during installation, removal, grooming, or testing phases of temporary systems, and during installation, repair, and drying of shipboard steam plant clean systems. You will participate in steam plant cleanliness audits and surveillances, develop and present steam plant clean training, and serve as Steam Plant Coordinator. You will perform engineering analysis and calculations associated with project designs and evaluation of non compliances.

Requirements

  • Must be a US Citizen.
  • Must be determined suitable for federal employment.
  • Must participate in the direct deposit pay program.
  • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
  • Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade level. This requirement is called time-in-grade. Time-in-grade requirements must be met by the closing date of this announcement.
  • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  • Males born after 12-31-59 must be registered for Selective Service.
  • This is a bargaining unit position.
  • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  • You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
  • Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
  • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.

Qualifications

Your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-11 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: Experience applying mastery of mechanical engineering knowledge through concepts, principles and practices of thermodynamic analysis, flow and pressure loss analysis, heat transfer, machine design, and strengths of materials. Experience providing engineering design services and applying technical knowledge of nuclear- powered submarines and aircraft carriers. Experience estimating man-hours from 2-Kilos, drawings, technical manuals and Business Office Work Requests. Experience evaluating and applying the latest developments and techniques in solving problems not readily treatable by traditional or accepted methods and to identify, evaluate, and recommend appropriate solutions to complex interrelated problems. Experience utilizing material information databases such as HIS System (Haystack), Level I Toolkit, MAT, and APLs. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.

OR

Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org

OR

Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.

OR

Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)

OR

Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

Contacts

  • Address NORFOLK NAVAL SHIPYARD NNSY Portsmouth, VA 23709 US
  • Name: Department of Navy EIC
  • Email: [email protected]

Map

Similar vacancies

SUPERVISORY MECHANICAL ENGINEER Mar 28 2024
$104 861 - 136 323

You will be responsible for providing all specialized services required in the field of Mechanical Engineering. You will exercise direct technical and admi...

SUPERVISORY MECHANICAL ENGINEER Apr 11 2024
$104 861 - 136 323

You will assign projects to subordinate employees, outline objectives, interpret guidelines, and furnish technical assistance and guidance as required. You ...

SUPERVISORY MECHANICAL ENGINEER Mar 21 2024
$104 861 - 136 323

You will provide all specialized services required in the field of Mechanical Engineering, including consultation and investigation, engineering, field engineering, design, and drafting services. ...

MECHANICAL ENGINEER Jan 26 2024
$104 861 - 136 323

You will develop HVAC and plumbing design drawings and specifications. You will prepare and negotiate architect and engineering (A/E) service contracts. ...

LEAD MECHANICAL ENGINEER May 16 2024
$104 861 - 136 323

You will be responsible for making recommendation to resolve issues, review local crane modification design changes, and evaluate process and procedure improvements to ensure reliability and efficienc...