About the Position: As Chief, Geotechnical Design and Dam Safety, supervises, directs, and coordinates work of 8-12 engineers and engineering technicians engaged in executing the section's Dam Safety responsibilities, Missouri River Levee and local protection flood control projects responsibilities, designing pavements, and foundation engineering on military objects.

Duties

Supervises geotechnical investigations, evaluation of available data, particularly boring and laboratory test results, ascertaining need for and planning program for further borings and laboratory tests deemed essential for obtaining additional data. Perform advanced planning and design work, with responsibility for preliminary and final designs in pavements, foundations, and geotechnical work associated with large and highly complex Military projects. Plan and schedule ongoing production, adjust work procedures to accommodate resource allocation, and improve work methods and procedures used to produce work products. Inspects projects while under construction and determines if conditions encountered require changes in original design, and if so, directs and supervises development of necessary changes to solve such construction problems as encountered Investigate geotechnical problems, relating to construction, modification, maintenance, and rehabilitation of structures. Coordinates with Project Managers and assigns staff to Product Development Teams.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• The duties of this position require the incumbent to possess or obtain and maintain a valid state Driver's License in one of the 50 U.S. states or possessions to operate vehicles.
• This position is supervisory as defined by the Office of Personnel Management's (OPM) General Schedule Supervisory Guide (GSSG). A one-year probation to assess your ability to perform supervisory duties is required unless previously completed.
• This position has a Temporary Duty (TDY) or business travel requirement up to 25% of the time.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Department of Army Civilian EmployeesCurrent Department of Defense (DOD) Civilian Employee (non-Army)Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel WorkforceInteragency Career Transition Assistance PlanLand Management Workforce Flexibility ActMilitary Spouses, under Executive Order (E.O.) 13473Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician EligiblePriority Placement Program, DoD Military Spouse Preference (MSP) EligiblePriority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability RetirementPriority Placement Program, DoD Retained Grade Preference EligibleVeterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Civil Engineers: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the basic requirement above, to qualify for this position, you must also meet the qualification requirements listed below: Specialized Experience (GS-13): One year of specialized experience which includes: performing geotechnical engineering on large civil works projects requiring geotechnical analysis (dams, levees, etc.); performing inspection on large high hazard dams resulting in inspection findings and reporting; performing inspection on levee systems resulting in inspection findings; performing geotechnical design for military projects. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-12). This position has a Selective Placement Factor as per USACE Guidance. Engineering positions at the GS-13 grade require professional registration as a Professional Engineer (PE). A copy of your current registration is required to be included in your application. You will be evaluated on the basis of your level of competency in the following areas: Civil EngineeringGeotechnical EngineeringTechnical Competence Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-12). Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this position, you must meet the qualification requirement using experience alone -- no substitution of education for experience is permitted.

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.

Contacts

• Address RH-W2SJ06 US ARMY ENGINEER DISTRICT-KANSAS CITY DO NOT MAIL Kansas City, MO 64106 US
• Name: Army Applicant Help Desk