You will serve as a COMPUTER OR ELECTRONICS ENGINEER, in the Mission Systems Group, Avionics Engineering Department, Core Avionics Engineering Division, Avionics Systems Development & Support Branch of NAVAIRWARCENAC DIV.

Duties

You will lead the development and execution of large-scale Radio Frequency (RF) and Fleet battlespace simulations used to test, train, and evaluate the effectiveness of modern waveforms capabilities for the Fleet. You will provide technical leadership in the frontier area of modeling and simulation which influences major research, development, testing, evaluation, innovation and reengineering projects, proposals, and direction throughout the agency. You will be responsible for strategic planning, cost estimating, project and personnel technical direction, facility management, and successful execution of all projects. You will provide the aircrew with the situational awareness needed for safety-of-flight and interfacing with other aircraft, land-based systems, and shipboard systems. You will perform work related to the research, development, integration, test, acquisition, and life-cycle support of electronic systems.

Requirements

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade level. This requirement is called time-in-grade. Time-in-grade requirements must be met by the closing date of this announcement.
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.
• This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
• Must obtain and maintain all required certification and/or license as a condition of employment.

Qualifications

Your resume must have one year of specialized experience equivalent to the next lower grade level (GS-13/14) or pay band DP-04 in the federal service or equivalent experience in the private or public sector as a professional COMPUTER OR ELECTRONICS performing duties such as: 1)Experienced with Radio frequency (RF) communications and network simulations; 2) Development, integration, support, and/or tools for: RF waveform models, RF effects, Antenna models, Next Generation Threat System (NGTS) simulation tools, visual and live data analysis and logging, CORE/Extensible Mobile Ad-hoc Network Emulator (EMANE); 3) Extensive knowledge of Modular and extensible simulation system architecture design; 4) Radio modeling of weather, fading, and antenna effects; 5) RF effects modeling and integration software and tools; 6) EMANE upgrades and support; 7) NGTS + EMANE integration; 8) Live simulation visualization tools; 9) Feasibility studies and white papers; 10) EMANE fidelity upgrades; 11) RF jammer modeling; 12) GPS and Link-16 modeling tools. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.

OR

Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org

OR

Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.

OR

Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)

OR

Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

Contacts

• Address NAVAIRWARCENAC DIV Naval Air Warfare Center Patuxent River, MD 20670-5304 US
• Name: Department of Navy EIC
• Email: [email protected]