You will serve as a GG-13 scientist, mathematician, naval architect, or engineer performing complex, in-depth, all-source, scientific and technical intelligence (S&TI) analysis on naval platforms and/or systems. This position is located at the FARRAGUT TECHNICAL ANALYSIS CENTER in Suitland, MD.

Duties

You will apply engineering skills within an engineering subject area to assess the technical characteristics (design, performance, capabilities, and limitations) of foreign missile systems and missile components. You will perform complex, in-depth, all-source, scientific and technical intelligence analysis on naval platforms and/or systems. You will apply engineering, modeling, and mathematical skills to contribute to engineering assessments of the assigned platform/systems, their associated components, and technologies. You will identify intelligence gaps and identify the appropriate collection vehicle to fill the gaps. Uses all available intelligence collection methods and systems, their capabilities and limitations, and appropriate tasking methods. You will serve as the technical program manager for external assistance contracts in support of the division, as needed. You will develop, tailor, prepare, and present intelligence assessments in written reports, briefs, and other tailored products. You will apply software intensive skills (including data analysis, data processing, and software tool development) to solve novel analytic/technical problems. You will learn and maintain aerospace principles (aerodynamics, propulsion, controls, etc.) or missile system/sub-system design (engines, decision logic, communications, electronic warfare, sensors, radar, optical infrared imaging, etc).

Requirements

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• You must obtain and maintain a Top Secret security clearance and access to Sensitive Compartmented Information (SCI). Failure to do so may result in the withdrawal of an offer or removal. Indicate the level and date of your clearance in your resume.
• Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or pass the test. You will be subject to random testing.
• You must acknowledge in writing that you are accepting an appointment in the DCIPS (excepted service) which does not confer competitive status, prior to appointment.
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• All Defense Intelligence positions under the Defense Civilian Intelligence Personnel System (DCIPS) are in the excepted service by specific statute, 10 U.S.C. 1601. This position is in the excepted service and does not confer competitive status.
• This position requires a periodic polygraph examination.
• This position may require a 2-year DCIPS trial period.
• Some travel may be required (within/outside U.S.).

Qualifications

In addition to the Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GG/GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following duties: 1. Apply engineering, modeling, and mathematical skills to contribute to engineering assessments of assigned platform/systems, their associated components, and technologies. 2. Resolve complex technical challenges related to software engineering tasks, e.g., software development, software testing, and system engineering. 3. Use innovative scientific and all-source analysis methodologies and processes for application to complex and comprehensive assessments of naval platform/systems capabilities and performance. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=Group-Standards https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/1300/physics-series-1310/ https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/1300/chemistry-series-1320/ https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/1500/mathematics-series-1520/ https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/1500/computer-science-series-1550/ Applicants must meet the following Basic Requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Applicants must possess: GG-0801/0854/0855/0871-13 Basic Requirements: A. Degree: Engineering. To be acceptable, the program must:(1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished(1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and(2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)Note: An applicant who meets the basic requirements as specified in A or B above, except as noted under B.1., may qualify for positions in any branch of engineering unless selective factors indicate otherwise.) Note: An applicant who meets the basic requirements as specified in A or B above, except as noted under B.1., may qualify for positions in any branch of engineering unless selective factors indicate otherwise.

Education

Continued

Applicants must meet the following Basic Requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

Applicants must possess:

GG-1310-13 Basic Requirements:

A. Degree: physics; or related degree that included at least 24 semester hours in physics.

OR

B. Combination of education and experience -- courses equivalent to a major in physics totaling at least 24 semester hours, plus appropriate experience or additional education.

In either A or B above, the courses must have included a fundamental course in general physics and, in addition, courses in any two of the following: electricity and magnetism, heat, light, mechanics, modern physics, and sound.

GG-1310-13 Basic Requirements:

A. Degree: physics; or related degree that included at least 24 semester hours in physics.

OR

B. Combination of education and experience -- courses equivalent to a major in physics totaling at least 24 semester hours, plus appropriate experience or additional education.

In either A or B above, the courses must have included a fundamental course in general physics and, in addition, courses in any two of the following: electricity and magnetism, heat, light, mechanics, modern physics, and sound.


GG-1320-13 Basic Requirements:

A. Degree: physical sciences, life sciences, or engineering that included 30 semester hours in chemistry, supplemented by course work in mathematics through differential and integral calculus, and at least 6 semester hours of physics.

OR

B. Combination of education and experience -- course work equivalent to a major as shown in A above, including at least 30 semester hours in chemistry, supplemented by mathematics through differential and integral calculus, and at least 6 semester hours of physics, plus appropriate experience or additional education.


GG-1520-13 Basic Requirements:

A. Degree: mathematics; or the equivalent of a major that included at least 24 semester hours in mathematics.

OR

B. Combination of education and experience -- courses equivalent to a major in mathematics (including at least 24 semester hours in mathematics), as shown in A above, plus appropriate experience or additional education. The total course work in either A or B above must have included differential and integral calculus and, in addition, four advanced mathematics courses requiring calculus or equivalent mathematics courses as a prerequisite.

GG-1550-13 Basic Requirements:

Bachelor's degree in computer science or bachelor's degree with 30 semester hours in a combination of mathematics, statistics, and computer science. At least 15 of the 30 semester hours must have included any combination of statistics and mathematics that included differential and integral calculus. All academic degrees and course work must be from accredited or pre-accredited institutions.

Evaluation of Education
Applicants should have sufficient knowledge to understand the fundamental concepts and techniques of computer science. Courses designed to provide an introduction to computer science techniques and methodologies, to problems of system design, and to other specialized fields are acceptable. Courses or experience in teaching elementary, business, or shop mathematics are not acceptable.


Education Substitution
If you are using education to meet all or part of the qualification requirements, you must submit a copy of your transcripts or an itemized list of college courses which includes equivalent information from the transcript (course title, semester/quarter hours, and grade/degree earned) in your resume. See OPM's General Policies for information on crediting education.

Foreign Education: Required for Vacancies with Positive Education or Education Substitution
Education completed in foreign colleges or universities may be used to meet the qualification requirements if the applicant can provide documentation indicating that the foreign education is comparable to that received in an accredited educational institution in the United States. It is the responsibility of the applicant to provide such evidence when applying for further information, visit:https://sites.ed.gov/international/recognition-of-foreign-qualifications/

Contacts

• Address FARRAGUT TECHNICAL ANALYSIS CENTER 4251 Suitland Road Washington, DC 20020 US
• Name: Department of Navy EIC
• Email: [email protected]