This is a public notice flyer to notify interested applicants of anticipated vacancies through the DHA for Bachelor Degree Candidates at Science and Technology Reinvention Labs. Applications will not be accepted through this flyer. Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered. There may or may not be actual vacancies filled from this flyer. Notice of Result letters will not be sent to applicants who respond to this flyer

Duties

You will provide authoritative inputs and software development on the Mission Computer Alternative (MCA) Family of Systems You will be involved in the development of avionics software, test applications, User Interfaces (UI), and software integration with hardware. You will be part of an Integrated Product Team (IPT) in support of the software development You will be responsible for contribution to requirements development, design, coding, testing, and the development of supporting artifacts focusing on software systems design.

Requirements

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.

Qualifications

For DP-02: Qualification for the DP-02 level only requires applicants to meet the basic education requirements for the position. For DP-03: In addition to the basic education requirement, Your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-5/8 grade level or DP-02 pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: 1) Identifying a wide variety of complex problems with many competing objectives, variables and constraints; 2) Serving as a member of an integrated team/group providing technical guidance to a technical workforce and meeting customer requirements for products and/or services; 3) Applying a variety of tools such as Risk Management, Configuration Management, Data Management, Trade-off Analysis/Trade Studies, Technical Performance Measurement, Technical Reviews, Modeling & Simulation or Earned Value Management to complete required tasks; 4) Assisting senior level engineers in their instrumentation systems design, development, procurement, fabrication, installation, calibration and test operations of systems used to monitor and capture aircraft instrumentation data. OR The following education may be substituted in lieu of specialized experience for the DP-03 level:2 years of progressively higher level graduate education leading to a master's degree or master's or equivalent graduate degree, directly related to the position. For DP-04: In addition to the basic education requirement, Your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-9/11 grade level or DP-03 pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: 1) Delivering technical solutions to achieve required technical performance within cost, schedule and technology constraints; 2) Identifying and solving a wide variety of complex problems with many competing objectives, variables and constraints; 3) Serving as a project lead, program manager, team lead or member of an integrated team/group providing technical guidance to a technical workforce and meeting customer requirements for products and/or services; 4) Applying a variety of tools such as Risk Management, Configuration Management, Data Management, Trade-off Analysis/Trade Studies, Technical Performance Measurement, Technical Reviews, Modeling & Simulation or Earned Value Management to complete required tasks; 5) Performing instrumentation systems design, development, procurement, fabrication, installation, calibration and test operations of systems used to monitor and capture aircraft instrumentation data; and 6) Providing expertise to junior instrumentation engineers and technicians. Additional qualification information can be found from the following Office of Personnel Management website:Computer Engineering Series 0854 (opm.gov) Electronics Engineering Series 0855 (opm.gov) Computer Science Series 1550 (opm.gov) Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

For 0855/0854 series: Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
OR
Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org
OR
Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.
OR
Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)
OR
Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

For 1550 Basic Requirements: Bachelor's degree in computer science or bachelor's degree with 30 semester hours in a combination of mathematics, statistics, and computer science. At least 15 of the 30 semester hours must have included any combination of statistics and mathematics that included differential and integral calculus. All academic degrees and course work must be from accredited or pre-accredited institutions.

Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications (https://www.ed.gov/). Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.

Education Substitution: If you are using education to meet all or part of the qualification requirements, you must submit a copy of your transcripts or an itemized list of college courses which includes equivalent information from the transcript (course title, semester/quarter hours, and grade/degree earned) in your resume. See OPM's General Policies for information on crediting education.

Contacts

• Address NAVAIRWARCENAC DIV Naval Air Warfare Center Patuxent River, MD 20670-5304 US
• Name: Geovana Lopez
• Phone: 301-904-5135
• Email: [email protected]