This is a public notice flyer to notify interested applicants of anticipated vacancies. Applications will not be accepted through this flyer. Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered. There may or may not be actual vacancies filled from this flyer. Notice of Result letters will not be sent to applicants who respond to this flyer.

Duties

You will assign work to subordinates based on priorities, considering the difficulty and requirements of the assignments, the type of work, existing workload, and the capabilities of the employees. You will conduct comprehensive reviews and evaluates work performance of subordinates through spot checks, through complaints from customers, and through observation of the employee at work. You will provide technical direction with a focus on architectural and engineering related issues. You will analyze, coordinate, implement, and track execution of Naval Special Warfare (NSW) design and construction projects. You will review designs and other technical construction project data such as cost estimates and value engineering reports to support the timely execution of projects. You will make budget and Program Objective Memorandum (POM) submission recommendations, defends programs for funding support, tracks approvals, and recommends project priorities.

Requirements

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to obtain and maintain an interim and/or final TOP SECRET SCI security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.
• This position is subject to random counterintelligence scope polygraph examinations.
• You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment.
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
• You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.
• Professional Registration/Certification (Professional Engineer-PE or Registered Architect-RA) is required.
• Supervisors in the executive branch have a heightened personal responsibility for advancing government ethics. You will be required to review the 14 General Principles of Ethical Conduct at 5 CFR 2635.101.

Qualifications

In addition to the Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: performing oversight, development, and implementation of policy and procedures for the assigned facilities planning, design, and construction programs throughout the department AND providing engineering functions and advisory services for a broad range of shore facility projects within the area of responsibility. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf and https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/general-engineering-series-0801/ Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Basic Requirements: 0801 A. Degree: Engineering To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. - OR - B. Combination of education and experience College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.) A transcript must be submitted with your application if qualifying using education. See Required Documents for additional information. Continued in "Education" section (below)

Education

Basic Requirements: 0808

1. Degree: architecture; or related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems.

OR

2. Combination of education and experience -- college-level education, training, and/or technical experience thatfurnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following:

1. Related Curriculum: Degree in architectural engineering may be accepted as satisfying in full the basic requirements, provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in paragraph A. The curriculum for a degree in either architecture or architectural engineering covers function, esthetics, site, structure, economics, mechanical-electrical, and other engineering problems related to the design and construction of buildings primarily (but not exclusively) intended to house human activities. The courses required for a degree in architecture generally place emphasis upon planning, esthetics, and materials and methods of construction, while the courses for an architectural engineering degree place equal or greater weight on the technical engineering aspects such as structural systems, mechanical systems, and the properties of materials. Because of this difference in emphasis, persons with degrees in architecture may have a preference for work assignments that offer greater opportunities for them to express their artistic and creative abilities. As a result, they may be more concerned with planning and design aspects of architecture, and persons with degrees in architectural engineering may be more engaged in aspects emphasizing technical engineering considerations.
2. Experience: An applicant lacking a degree in architecture must have had l year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of college courses, 5 years of such experience is required. This experience must have demonstrated that the applicant has acquired a thorough knowledge of the fundamental principles and theories of professional architecture.

A transcript must be submitted with your application if qualifying using education. See Required Documents for additional information.

Contacts

• Address NAVAL SPECIAL WARFARE COMMAND Naval Special Warfare Command Coronado, CA 92155 US
• Name: Veronica Ortiz
• Phone: 813-939-2917
• Email: [email protected]