This position serves as the Chief, Engineering Service with responsibility for the professional Engineering programs such as Maintenance and Repair, Utility Plant Operations, Energy Management and Conservation Program, Safety, Fire Prevention, Industrial Hygiene, Disaster Preparedness, Green Environmental Management, Vehicle Fleet, Grounds, Capital Planning, and Construction Project Management section at a multi-faceted VA Medical Center, including outlying Community Based Outpatient Clinics.

Duties

The duties include but are not limited to: Engineering Program Management and Administration: The Chief Engineer is responsible for strengthening and enhancing healthcare facility engineering and operations. The Chief Engineer is a key managerial advisor reporting directly to top Medical Center management. This position is a responsible leader and a member of the Medical Center top management team and is relied on for authoritative advice on all aspects of engineering matters. This position is a fully participating technical advisor in all or almost all significant management planning, policy, and decision-making actions of the Medical Center except those of a primarily medical nature. Budgeting/Financial Management Work: Provides for the budgeting and financial management for Engineering Service. This includes budget formulation, justification, and execution; financial management; and financial reporting. The Chief Engineer identifies functional requirements for current and future programs inclusive of life-cycle costs. Provides advice to management and program personnel on budgetary and finance issues. As top advisor to management, provides budget management for major, unstable programs. Exercises responsibility for budget formulation, presentation, and execution. Research and Analysis Work: Researches and/or analyzes problems, issues, or program requirements related to all areas of the facility and all facets of Engineering Service. Provides expert analysis and advice on complex program issues. Based on operations and changing program requirements, identifies relevant issues. Collects relevant information from many varied sources, some of which are difficult to access. Devises new analytical techniques to evaluate findings. Makes authoritative recommendations. Researches and provides technical recommendations pertaining to a wide-range of national codes and standards including but not limited to the (NFPA), OSHA, TJC, EPA, (CDC) and (NIOSH). Special Projects: Plans and/or accomplishes special projects. Manages special projects for major office or program issues of broad impact. Conceives and implements new initiatives and projects to strengthen, facilitate, and integrate programs. Undertakes or participates in special projects, ongoing analyses, investigations, and initiatives that have high priority for high-level management. This may involve producing complex analyses and written reports; organizing special committees, workshops, and other gatherings; initiating program reviews; and developing or fostering cross-agency activities. Professional Engineering/Architectural Analysis and Advice: This position serves as the Chief Engineer within a medical center/VISN/VACO hierarchy. In this capacity he meets regularly with other Engineers from across the country and VA Leadership from the Office of Capital Asset Management and Engineering Support (OCAMES). This position interfaces between VACO and the other Chief Engineers in VISN, and the VISN Capital Asset Manager. This position assists the VISN offices and other chief engineers by providing technical advice and input on a wide range of engineering issues, including the Strategic Capital Investment Plan, Capital Asset Inventory, Capital Asset Resource Survey, Deferred Maintenance, management of an engineering department, and a myriad of engineering related topics. Performs Construction Administration Work: This position is responsible for development and implementation of the Medical Center's capital improvement program. The Chief Engineer works with medical activities to identify additional space needs and needed renovations. This position establishes leases as needed. Identified needs are individually transformed to engineering requirements, estimated, accomplished locally, or included as part of a comprehensive plan for agency funding. Coordinates and oversees scheduling and layout of operations, inspection and surveillance of materials, methods, and equipment used in FS #91317-S construction and renovation managed by subordinate engineers and engineering technicians. SUPERVISORY CONTROLS The Chief Engineer is typically responsible for all personnel in Engineering Service and collaborates with the Associate Director, program managers, members of professional guilds, and others as appropriate, but maintains final authority in establishing organizational structure and guidelines, performance standards, work review and reporting requirements, and defines the line of authority and supervisory controls essential to carry out the mission of the Engineering Service. Work Schedule: Monday - Friday, 8:00am-4:30pm Telework: Ad-Hoc Virtual: This is not a virtual position. Position Description Title/PD#: Supervisory Healthcare Engineer - Chief (Relocation Auth)/: 91317-S Relocation Incentive: Authorized Permanent Change of Station (PCS): Authorized Financial Disclosure Report: Not required

Requirements

• You must be a U.S. citizen to apply for this job
• Subject to a background/suitability investigation
• Designated and/or random drug testing may be required
• May serve a probationary period
• Selective Service Registration is required for males born after 12/31/1959
• A complete application package; Resume, Transcripts, etc
• Selected applicants will be required to complete an online onboarding process

Qualifications

To qualify for this position, applicants must meet all requirements by the closing date of this announcement, 08/16/2024. Time-In-Grade Requirement: Applicants who are current Federal employees and have held a GS grade any time in the past 52 weeks must also meet time-in-grade requirements by the closing date of this announcement. For a GS-14 position you must have served 52 weeks at the GS-13. The grade may have been in any occupation, but must have been held in the Federal service. An SF-50 that shows your time-in-grade eligibility must be submitted with your application materials. If the most recent SF-50 has an effective date within the past year, it may not clearly demonstrate you possess one-year time-in-grade, as required by the announcement. In this instance, you must provide an additional SF-50 that clearly demonstrates one-year time-in-grade. Note: Time-In-Grade requirements also apply to former Federal employees applying for reinstatement as well as current employees applying for Veterans Employment Opportunities Act of 1998 (VEOA) appointment. To qualify for this position, applicants must meet all requirements by the closing date of this announcement. Basic Requirements: Qualified Applicants must meet the basic requirements for Professional Engineering positions. You must possess either education or a combination of education and experience as described below: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: Professional registration or licensure: Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. OR Written Test: Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. OR Specified academic courses: Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. OR Related curriculum: Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one (1) year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) AND Specialized Experience: You must have one year of specialized experience equivalent to at least the next lower grade GS-13 in the normal line of progression for the occupation in the organization. Examples of specialized experience would typically include, but are not limited to: The planning, organizing, directing, evaluating, and management process for Service Line programs, which include setting qualitative and quantitative standards. Develops and provides the Executive Leadership Team and the clinical staff information on the methods, techniques, and procedures necessary to integrate the Engineering, Maintenance, Capital Management, and other Engineering programs into the mission of the Medical Center. Oversees the Joint Commission (JC) Environment of Care Programs for Utility Systems Management, Safety, Life Safety, and Medical Equipment Management for both the Medical Center and all Community Based Outpatient Clinics (CBOCs). References: VA Handbook 5005/150, Part II Appendix G72, Healthcare Engineer Qualification Standard. Preferred Experience: Engineering experience in a hospital or clinic setting. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religions; spiritual; community; student; social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Note: A full year of work is considered to be 35-40 hours of work per week. Part-time experience will be credited on the basis of time actually spent in appropriate activities. Applicants wishing to receive credit for such experience must indicate clearly the nature of their duties and responsibilities in each position and the number of hours a week spent in such employment. Physical Requirements: The work is primarily sedentary, although some physical effort may be required, e.g., walking, standing, climbing ladders, stooping, kneeling, and carrying light items such as manuals or briefcases, or driving or traveling by motor vehicle. Work Environment: The work environment involves everyday risks or discomforts that require normal safety precautions typical of such places as offices, training rooms, and libraries. The work area is adequately lighted, heated, and ventilated. The Chief Engineer must also work outdoors in all types of weather. There may be occasional exposure to moderate risks or discomforts in storage areas or hazardous waste sites. For more information on these qualification standards, please visit the United States Office of Personnel Management's website at https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/.

Education

There is no educational substitution at this grade level.

A transcript must be submitted with your application if you are basing all or part of your qualifications on education.

Note: Only education or degrees recognized by the U.S. Department of Education from accredited colleges, universities, schools, or institutions may be used to qualify for Federal employment. You can verify your education here: http://ope.ed.gov/accreditation/. If you are using foreign education to meet qualification requirements, you must send a Certificate of Foreign Equivalency with your transcript in order to receive credit for that education. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html.

Contacts

• Address Dayton VA Medical Center 4100 West Third Street Dayton, OH 45428 US
• Name: Tyler Willis
• Phone: 937-268-6511 X2883
• Email: [email protected]