This is a public notice flyer to notify interested applicants of anticipated vacancies. Applications will not be accepted through this flyer. Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered. There may or may not be actual vacancies filled from this flyer. Notice of Result letters will not be sent to applicants who respond to this flyer.

Duties

You will oversee contracted design and construction activities to ensure compliance with contract specifications, safety standards and programs, and requirements for documentation of records and drawings. You will compile written reports to provide leadership with status updates. You will develop solutions to mitigate or eliminate obstructions to project completion. You will identify resources for the development of long range construction operations. You will adapt oral communication methods and styles based on the audience and the target objectives.

Requirements

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to obtain and maintain an interim and/or final secret security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). You must be certified as a Career Field - Facilities Engineering - Level III. Certification is required within 24 months of appointment.
• This position may require occasional travel from normal duty station. You must be able to travel on military and commercial aircraft.
• You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment.
• You will be required to obtain and maintain a current valid United States driver’s license.
• You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.
• At the GS-13 Level, You are required to have and maintain a current registration as a Professional Engineer (PE) or Architect (RA) in any state, District of Columbia, Guam or Puerto Rico.
• You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes, when making site visits, as determined by site conditions and applicable safety regulations.
• Work may performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.

Qualifications

Selective Placement Factor (SPF): If applying for this position at the GS-13 level, you must hold a current Professional Engineer (PE) or Architect (RA) registration from any state, the District of Columbia, Guam or Puerto Rico. You must provide a copy of your current registration with your application. A copy of a wall certificate that does not show current registration status will not serve to verify you meet this requirement. GS-13: In addition to the SPF and Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector performing the following duties: 1) Provides assistance and technical guidance to other engineers/architects, or other NAVFAC business/support lines or functional areas as appropriate, exercising management and administrative skills in leading the execution of Capital Improvements projects post-award; 2) Manages multiple priorities and provide technical recommendations/solutions to complex problems encountered during the administration of the construction contracts; 3) Coordinates mandatory post-award contract meetings such as post-award kickoff meetings (as applicable), preconstruction conferences, (informal or formal) partnering meetings, schedule acceptance meeting, design review meetings (as applicable), coordination and mutual understanding meeting, LEED coordination meetings (as applicable), Facility Turnover Planning Meetings (NAVFAC Red Zone), and final inspections; 4) Reviews and accepts contractor administrative submittals such as schedules (both bar charts and networks), environmental protection plan, design and construction quality control plan, health and safety plan, accident prevention plan; and coordinate review and approval of technical "Government-approved" submittals such as shop drawings, product data, samples, design data, manufacturer's instructions, test plans/reports, certificates, and O&M data in a timely manner; and 5) Monitors available project budget and time constraints, including relevant cost and schedule growth metrics, and initiating appropriate planning and corrective action as necessary to ensure funding thresholds and impacts to operational needs are not exceeded. Incumbent must possess a keen understanding of schedules utilizing network analysis and the potential impact of modifications to the critical path. GS-12: Your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-11 grade level or pay band in the Federal service or equivalent experience in the private or public sector performing the following duties: 1) Providing assistance and technical guidance to other engineers/architects, or other NAVFAC business/support lines or functional areas as appropriate, exercising management and administrative skills in leading the execution of Capital Improvements projects post-award; 2) Assists with managing multiple priorities and provide technical recommendations/solutions to complex problems encountered during the administration of the construction contracts; 3) Assists with coordinating mandatory post-award contract meetings such as post-award kickoff meetings (as applicable), preconstruction conferences, (informal or formal) partnering meetings, schedule acceptance meeting, design review meetings (as applicable), coordination and mutual understanding meeting, LEED coordination meetings (as applicable), Facility Turnover Planning Meetings (NAVFAC Red Zone), and final inspections; 4) Assists with reviewing and accepting contractor administrative submittals such as schedules (both bar charts and networks), environmental protection plan, design and construction quality control plan, health and safety plan, accident prevention plan; and coordinate review and approval of technical "Government-approved" submittals such as shop drawings, product data, samples, design data, manufacturer's instructions, test plans/reports, certificates, and O&M data in a timely manner; and 5) Assists with monitoring available project budget and time constraints, including relevant cost and schedule growth metrics, and initiating appropriate planning and corrective action as necessary to ensure funding thresholds and impacts to operational needs are not exceeded. Incumbent must possess a keen understanding of schedules utilizing network analysis and the potential impact of modifications to the critical path. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/architecture-series-0808/ https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/general-engineering-series-0801/ Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Applicants must possess

For the General Engineer (0801) series: Successful completion of a bachelor's degree (or higher) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.

OR

Have a combination of college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: (I) Professional registration or licensure: Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration; or (II) Written Test: Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico;

OR

(III) Specified academic courses: Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above);OR:(IV) Related curriculum: Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

For the Architect (0808) series: Have a bachelor's or higher degree in a field related to architecture that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems.

OR

Have a combination of college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. My curriculum for a degree in either architecture or architectural engineering covers function, esthetics, site, structure, economics, mechanical-electrical, and other engineering problems related to the design and construction of buildings primarily (but not exclusively) intended to house human activities.

OR

I lack a degree in architecture, but I have 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture that demonstrates that I have acquired a thorough knowledge of the fundamental principles and theories of professional architecture. (Note - In the absence of college courses, 5 years of such experience is required).

Contacts

• Address NAVAL FAC ENGINEERING CMD WASH 1001 North St SE 208 Washington, DC 20020 US
• Name: NAVFAC Washington Human Resources Office
• Phone: (202) 685-0616
• Email: [email protected]