About the Position: This is an Interdisciplinary GS 13, position with the U.S. Army Corps of Engineers, Northwestern Division (NWD), Omaha District. This position serves as the Design Branch Workload Manager with responsibility for the management of the design program with respect to budgeting, scheduling and development of fee proposals for design projects and studies requested by the Department of Defense, Army, Air Force, Navy and several other Federal and State Agencies.

Duties

As the Design Branch Workload Manager, you will: Manage design reviews to ensure technical adequacy of designs and studies for all engineering and architectural products. Lead the Branches within the Omaha Engineering Division to execute all technical management activities to meet customers need dates lock-in dates for all projects. Perform the comprehensive analysis of workload and the projections of resource needs for Division roll-up. Refine business practices for effective and efficient execution of work by the Branch for the District mission.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• This position has a Temporary Duty (TDY) or business travel requirement of 10% of the time.

Qualifications

Position may be filled as a temporary promotion, reassignment or change to lower gradeNTE 3 years by a current permanent Army employee, may be extended up to a maximum of five years or made permanent without further competition. For current permanent Army employees with competitive status (tenure 1 or 2), return rights will be negotiated prior to being placed in the temporary assignment. Position may be filled as a term appointment NTE 3 years, may be extended up to the maximum of 8 years. Term Appointments may be converted to permanent without further competition should it become available and the employee has completed 2 years with 2 fully successful performance ratings. If a permanent federal employee applies and is selected, the employee will forfeit their permanent status and becomes subject to the provisions of the term appointment. Permanent Army employees who accept a time limited appointment will not have placement rights to the previously held permanent position at the end of the time limited appointment. Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Department of Army Civilian EmployeesCurrent Department of Defense (DOD) Civilian Employee (non-Army)Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel WorkforceInteragency Career Transition Assistance PlanLand Management Workforce Flexibility ActMilitary Spouse Preference (MSP) for Overseas EmploymentNon-Department of Defense (DoD) TransferPriority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician EligiblePriority Placement Program, DoD Military Spouse Preference (MSP) EligiblePriority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability RetirementPriority Placement Program, DoD Retained Grade Preference EligibleReinstatementVeterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education AND experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Specialized Experience: One year of specialized experience which includes coordinating efforts of a regional design program with respect to budgeting, scheduling and development of proposals for design projects and/or studies related to utility distribution systems, administrative facilities, medical facilities, water and waste treatment plants, HTRW/environmental projects, and flood control projects and other related projects. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-12). Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted. In addition to meeting the Specialized Experience requirement above, to qualify for this position you must also meet the Basic Qualification requirements listed below. You will be evaluated on the basis of your level of competency in the following areas: Engineering ManagementEngineering Planning, Design, and ConstructionProject Management Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-12). In addition to meeting the Specialized Experience requirement above, to qualify for this position you must also meet the Basic Qualification requirements listed below. Basic Requirement for a Landscape Architect: A. Degree: Bachelor's degree (or higher degree) in landscape architecture or landscape design. OR B. Combination of Education and Experience: For each year short of graduation, the applicant must have had one year of experience under professional leadership and guidance of such character and diversity as to be a satisfactory substitute for the required education. This experience must have included original landscape design Basic Requirement for an Architect: A. Degree: Bachelor's degree (or higher degree) in architecture or in a related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following: (1) Related Curriculum - Degree in architectural engineering provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in statement A above, or (2) Experience: 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of any college courses, 5 years of such experience is required. This experience must have demonstrated that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture.

Education

(Basic Requirement Continued)

Basic Requirement for a Geologist:

A. Degree: Bachelor's degree (or higher degree) in geology, plus 20 additional semester hous in any combination of mathematics, physics, chemistry, biological science, structural, chemical, civil, mining or petroleum engineering, computer science, planetary geology, comparative planetology, geophysics, meteorology, hydrology, oceanography, physical geography, marine geology, and cartography.

OR

B. Combination of Education and Experience: Course work as shown in A above, plus appropriate experience or additional education.(Note:Acceptable experience may have been gained through geological field or laboratory work that provided a means of obtaining professional knowledge of the theory and application of the principles of geology and closely related sciences, e.g., geophysics, geochemistry, or hydrology. Such work generally must have involved making close observations, taking samples, handling various types of instruments and equipment, assembling geologic data from source materials, and analyzing and reporting findings orally and in writing. In some situations, professional scientific experience in other fields may be accepted in part as professional geological experience. Such experience must have been preceded by appropriate education in geology or by professional geological experience, and must have contributed directly and significantly to the applicant's professional geological competence. To receive credit for geological experience obtained in positions that are not full-time professional geological positions, the applicant is responsible for indicating clearly the actual time or percentage of time devoted to geologic duties within such positions, and for giving adequate descriptions of the geologic functions.)

Basic Requirement for an Engineer:

A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.

3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.

4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.



FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.

Contacts

• Address RH-W07106 US ARMY ENGINEER DISTRICT-OMAHA DO NOT MAIL Omaha, NE 68102 US
• Name: Army Applicant Help Desk