You will serve as a Technical Consultant/Project Leader in the Infrastructure Planning Division of the Shipyard Infrastructure Optimization Program (SIOP) Department at the Norfolk Naval Shipyard. The mission of SIOP is to plan, program, and resource the infrastructure investments in support of the Navy's future ship and submarine depot maintenance capabilities.

Duties

You will serve as a technical consultant, project leader and advisor for various SIOP program areas relating to industrial facilities and infrastructure planning. You will be a liaison and primary representative for all local stakeholders such as the Shipyard Commander, including coordinating between major DON commands such as NAVFAC, NAVSEA, CNIC and PEO II. You will plan, program and direct various program areas throughout facility project planning, programming, design and into construction, ensuring that the infrastructure investment meets customer needs. You will lead budget and schedule analysis in the areas of master planning and programming for facilities and infrastructure construction projects. You will be involved in projects that have to balance complex industrial facility requirements and various utilities, environmental, base support, space utilization, and results of other special studies.

Requirements

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade level. This requirement is called time-in-grade. Time-in-grade requirements must be met by the closing date of this announcement.
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to obtain and maintain an interim and/or final secret security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• This position may require occasional travel from normal duty station to CONUS and OCONUS sites. You must be able to travel on military and commercial aircraft.
• You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment.
• May be recalled to duty and/or required to work overtime.
• Must be able to obtain and maintain access into the Naval Shipyard Controlled Industrial Area (CIA).
• You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.
• 0801/0808 applicants: this position requires current registration as a Professional Engineer (PE) or Architect (RA). You must provide a copy of your current registration with your application.

Qualifications

Selective Placement Factor (SPF): If applying for the 0801/0808 series, you must have a current registration as a Professional Engineer (PE) or Architect (RA) from any state, the District of Columbia, Guam or Puerto Rico. You must provide a copy of your current registration with your application. 0020/0801/0808 In addition to the SPF and Basic Requirements for the series in which you are applying, your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector performing the following duties: 1) Providing planning and design expertise and guidance to stakeholders on facilities programming and development; 2) Leading interdisciplinary teams in the development of infrastructure projects that can improve efficiency and quality; and 3) Evaluating and monitoring facility construction project timelines and milestones, including budget. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0000/community-planning-series-0020 /https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/architecture-series-0808/ Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants for the Engineering Series must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position. OR: Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org. OR:
Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html..
OR:
Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements listed above. The courses must be fully acceptable toward meeting the requirements of an engineering program as described above.
OR:
Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

Applicants for the Architecture Series must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
Successful completion of a bachelor's or higher degree in architecture.
OR:
Successful completion of a bachelor's or higher degree in a field related to architecture that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems.
OR:
Have a combination of college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The curriculum for a degree is in either architecture or architectural engineering and covers function, esthetics, site, structure, economics, mechanical-electrical, and other engineering problems related to the design and construction of buildings primarily (but not exclusively) intended to house human activities OR you lack a degree in architecture, but have 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture that demonstrates that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture. (Note - In the absence of college courses, 5 years of such experience is required).

Applicants for the Community Planner Series must meet the following basic education requirements:
Degree: community planning; or related field such as urban affairs, architecture, landscape architecture, engineering, sociology, geography, economics, political science, or public administration that included at least 12 semester hours in the planning process, socioeconomic and physical elements of planning, urban and regional economic analysis, and development finance.
OR:
Combination of education and experience: courses equivalent to a major in one of the above disciplines, or a combination of related courses totaling at least 24 semester hours in any combination of the above disciplines of which at least 12 semester hours were in the planning process, and socioeconomic and physical elements of planning, plus appropriate experience or additional education.

Contacts

• Address SIOP PMO NORFOLK NNSY Trailer M32 NNSY Portsmouth, VA 23709 US
• Name: Department of Navy EIC
• Email: [email protected]