Please limit your resume to 5 pages. If more than 5 pages are submitted, only the first 5 pages will be reviewed to determine your eligibility/qualifications. About the Position: This position is located with the Directorate of Public Works, Engineering Services Division, Construction Services Branch, located on Joint Base Lewis-McChord, Washington.

Duties

You will serve as a project manager and designer for a full range of conventional construction projects involving repair, renovation, modification and minor construction projects You will serve as project manager for projects to be designed yourself and/or Architect Engineer (AE) firms. You will serve as Contracting Officer Representative (COR) for all assigned AE and in-house construction contracts.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• This position requires pre-employment financial disclosure and annually thereafter in accordance with Department of Defense Directive 5500-7-R
• This position requires a valid, State-issued motor vehicle driver's license.
• You may be required to travel up to 10% of the time.
• This is an obligated position. An obligated position is one to which an employee has statutory restoration rights or entitlement based on active military service, recovery from a compensable injury, or return rights based on an overseas tour.
• This position has been designated "Mission Essential".

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Civilian Employees of the OrganizationCurrent Department of Army Civilian Employees In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement- Architect: A. Degree: Bachelor's degree (or higher degree) in architecture or in a related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following: (1) Related Curriculum - Degree in architectural engineering provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in statement A above, or (2) Experience: 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of any college courses, 5 years of such experience is required. This experience must have demonstrated that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture. Basic Requirement-Engineers: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. Please refer to the Basic Education Requirements AND Minimum Qualifications for the entire list of education and combination of education/experience requirements. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: To qualify for the GS-07: Specialized Experience: One year of specialized experience which includes reviewing design drawings for adherence to project specifications. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-05). OR Education: One full year of graduate level education in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Architecture or Engineering. OR Superior Academic Achievement. In order to be creditable under this provision, Superior Academic Achievement must have been gained in a curriculum that is qualifying for the position to be filled, such as that identified in Education above. Superior Academic Achievement is based on:(1) Class Standing - Applicants must be in the upper third of the graduating class in the college, university, or major subdivision, such as the College of Liberal Arts or the School of Business Administration, based on completed courses; OR(2) Grade-Point Average (G.P.A.) - Applicants must have a grade-point average of either (a) 3.0 or higher out of a possible 4.0 ("B" or better) as recorded on your official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or (b) 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2 years of the curriculum.; OR(3) Honor Society Membership - Applicants may be considered eligible based on membership in one of the approved national scholastic honor societies listed by the Association of College Honor Societies (https://www.achsnatl.org/). OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) by 18. Add the two percentages. Qualification requirement continued in Education box. You will be evaluated on the basis of your level of competency in the following areas: Contracting/ProcurementCustomer Service (Clerical/Technical)Electrical EngineeringProject ManagementTechnical Competence

Education

To qualify for the GS-09: Specialized Experience: One year of specialized experience equivalent to the GS-07 grade level in the Federal service which includes working with higher grade engineers during design to assist in the development or review of construction bid packages or construction management on active projects to ensure technical engineering requirements are met. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-07).

OR

Education: Master's or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Architecture or Engineering.

OR

Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total graduate semester hours minus 18) by 18. Add the two percentages.

To qualify for the GS-11:Specialized Experience: One year of specialized experience equivalent to the GS-09 grade level in the Federal service which includes assisting higher grade engineers with the development of scope(s) of work and technical specifications for repair, renovation, or modernization projects involving one or more of the following categories: buildings such as barracks, dormitories, dining facilities, administrative, industrial, warehouse; utility systems such as electrical ; utility plants such as waste water treatment plant, boiler plants, or water treatment plants and/or construction management of active projects in the categories listed above. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09).

OR

Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to perform the work of the position, such as Civil Engineering, Mechanical Engineering, Environmental Engineering, Electrical Engineering or Architecture. (Note: You must attach a copy of your transcripts.)

OR

Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total graduate semester hours minus 18) by 18. Add the two percentages.

Time in Grade Requirement for GS-07: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-05).
Time in Grade Requirement for GS-09: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-07).
Time in Grade Requirement for GS-11: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-09).

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.

Contacts

• Address EU-APF-W12KAA JOINT BASE LEWIS-MCCHORD DO NOT MAIL Tacoma, WA 98433 US
• Name: Army Applicant Help Desk