You will serve as a Maintenance Mechanic in the Public Works of NAV FACILITIES ENGINEERING COMMAND SE.

Duties

You will install, align, troubleshoot, repair, overhaul, and maintain various types of nonproduction industrial plant machinery, equipment, and systems You will disassemble and repair general industrial plant machinery, equipment, and systems. You will weld a variety of metals and alloys. You will use a variety of manual manual welding processes, e.g., several different gas torch processes, to weld all types of metals and alloys of various sizes, shapes, and thicknesses, including dissimilar metals such as copper to steel You will use arc processes which use methods such as gas metal-arc, gas tungsten-arc, gas carbon arc, plasma-arc, and atomic hydrogen welding. You will interpret blueprints, determine welding position, and type of metal to be fused. You will be responsible for selecting and setting up welding equipment. You will ensure welds meet standards and engineering design drawings and specifications.

Requirements

• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• This is a bargaining unit position.
• You will be required to obtain and maintain a current valid United States driver’s license.
• You will be required to successfully complete a pre-appointment physical examination.
• You will be required to obtain and maintain an interim and/or final secret security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
• This position is subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
• This position requires exposure to high noise levels.

Qualifications

Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: THE ABILITY TO DO THE WORK OF A MAINTENANCE MECHANIC WITHOUT MORE THAN NORMAL SUPERVISION. You must have the ability to perform common tasks including: 1) Welding using oxyacetylene, electric arc and other welding techniques on various metals flat, round stock and piping, and metal fabrication using shears and metal breaks to fabricate ductwork, flashing and other job specific applications; 2) Comprehensive knowledge of mechanical fundamentals used in order to effectively service and repair various types of mechanical equipment to include air compressors reciprocal and screw type, air dryers, pumps, motor controllers and related equipment; and 3) Performing visual checks of boilers, heating and air conditioning systems to determine causes of defects on equipment. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: https://www.opm.gov/policy-data-oversight/classification-qualifications/federal-wage-system-qualifications/#url=Overview Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

This job does not have an education qualification requirement.

Contacts

• Address NAV FACILITIES ENGINEERING COMMAND SE Naval Air Station Bldg 903 PO Box 30 Jacksonville, FL 32212-0030 US
• Name: Department of Navy EIC
• Email: [email protected]